Cadillac XLR

All makes › Cadillac › XLR › 2006

Cold pressures. Final-tighten wheel nuts with a calibrated torque wrench, never an impact gun. Re-check after 25–50 miles.

Wheel nut torque · 2006

140 Nm

235/40R20, 235/45R19, 235/50R18, 255/45R19, 265/35R20

4 bolts

5 bolts

6 bolts

Use the star / cross order that matches the wheel. Start fasteners by hand. Seat the wheel flush on the hub before final torque. Recheck after 25–50 miles. Confirm against the vehicle placard and handbook.

Pressures Torque Placard Location

Workshop checks

When to torque: every time a wheel is off — tyres, punctures, seasonal swap, brakes.

Seat first: the wheel must sit flush on the hub. Dirt or rust under the wheel means the wrench number is meaningless.

Match the seat: conical, ball/radius and flat/washer seats are not interchangeable. Thread size alone is not enough.

Recheck: after 25–50 miles check the same figure again. Do not add extra Nm.

Conicaltapered cone — angle must match the wheel

Ball / radiusrounded seat — common on some OEM alloys

Flat / washerflat clamp, often with a shank and washer

Pressures

Tyre	Normal F/R	Laden F/R	Eco F/R	Torque
235/40R20	32 PSI / 32 PSI	—	—	140 Nm
235/45R19	32 PSI / 32 PSI	—	—	140 Nm
235/50R18	32 PSI / 32 PSI	—	—	140 Nm
255/45R19	32 PSI / 32 PSI	—	—	140 Nm
265/35R20	32 PSI / 32 PSI	—	—	140 Nm

Fitment specs

2004 Bolt Pattern: 5x120.65. Recorded centre bore (mm): 70.3.Wheel offset (ET)Recorded offset (ET m
2004 Bolt Pattern: 5x120.65. Recorded centre bore (mm): 70.3.Wheel offset (ET)Recorded offset (ET m
2004 Bolt Pattern: 5x120.65. Recorded centre bore (mm): 70.3.Wheel offset (ET)Recorded offset (ET m
2004 Bolt Pattern: 5x120.65. Recorded centre bore (mm): 70.3.Wheel offset (ET)Recorded offset (ET m
2004 Centre Bore: 70.3Sponsored(adsbygoogle=window.adsbygoogle||[]).push({});Understanding wheel f
2004 Centre Bore: 70.3SponsoredUnderstanding wheel fitment measurements: Cadillac XLRPCD and centr
2004 Centre Bore: 70.3SponsoredUnderstanding wheel fitment measurements: Cadillac XLRPCD and centr
2004 Centre Bore: 70.3SponsoredUnderstanding wheel fitment measurements: Cadillac XLRPCD and centr
2004 Offset: centre-bore/","name":"Cadillac XLR Wheel Fitment, PCD, Offset & Centre Bore | Pu
2004 Offset: 45Rear Offset: 45Centre Bore: 70.3SponsoredUnderstanding wheel fitment measureme
2004 Offset: 45Rear Offset: 45Centre Bore: 70.3SponsoredUnderstanding wheel fitment measureme
2004 Offset: 45Rear Offset: 45Centre Bore: 70.3SponsoredUnderstanding wheel fitment measureme
2004 PCD: offset-centre-bore/","name":"Cadillac XLR Wheel Fitment, PCD, Offset & Centre Bo
2004 PCD: 5x120.65Front Offset: 45Rear Offset: 45Centre Bore: 70.3SponsoredUnderstanding w
2004 PCD: 5x120.65Front Offset: 45Rear Offset: 45Centre Bore: 70.3SponsoredUnderstanding w
2004 PCD: 5x120.65Front Offset: 45Rear Offset: 45Centre Bore: 70.3SponsoredUnderstanding w
2004 Centre bore: 70.3
2004 Front offset: 45
2004 PCD: 5x120.65
2004 Rear offset: 45
2004 Centre bore: 70.3
2004 Front offset: 45
2004 PCD: 5x120.65
2004 Rear offset: 45
2004 Centre bore: 70.3
2004 Front offset: 45
2004 PCD: 5x120.65
2004 Rear offset: 45
2004 Centre bore: 70.3
2004 Front offset: 45
2004 PCD: 5x120.65
2004 Rear offset: 45
2004 Centre bore: 70.3
2004 Front offset: 45
2004 PCD: 5x120.65
2004 Rear offset: 45
2005 Centre bore: 70.3
2005 Front offset: 45
2005 PCD: 5x120.65
2005 Rear offset: 45
2005 Centre bore: 70.3
2005 Front offset: 45
2005 PCD: 5x120.65
2005 Rear offset: 45
2005 Centre bore: 70.3
2005 Front offset: 45
2005 PCD: 5x120.65
2005 Rear offset: 45
2005 Centre bore: 70.3
2005 Front offset: 45
2005 PCD: 5x120.65
2005 Rear offset: 45
2005 Centre bore: 70.3
2005 Front offset: 45
2005 PCD: 5x120.65
2005 Rear offset: 45
2006 Centre bore: 70.3
2006 Front offset: 45
2006 PCD: 5x120.65
2006 Rear offset: 45