Cadillac Brougham

All makes › Cadillac › Brougham › 1987

Cold pressures. Final-tighten wheel nuts with a calibrated torque wrench, never an impact gun. Re-check after 25–50 miles.

Wheel nut torque · 1987

110 Nm

205/80R15, 215/75R15, 235/70R15

4 bolts

5 bolts

6 bolts

Use the star / cross order that matches the wheel. Start fasteners by hand. Seat the wheel flush on the hub before final torque. Recheck after 25–50 miles. Confirm against the vehicle placard and handbook.

Pressures Torque Placard Location

Workshop checks

When to torque: every time a wheel is off — tyres, punctures, seasonal swap, brakes.

Seat first: the wheel must sit flush on the hub. Dirt or rust under the wheel means the wrench number is meaningless.

Match the seat: conical, ball/radius and flat/washer seats are not interchangeable. Thread size alone is not enough.

Recheck: after 25–50 miles check the same figure again. Do not add extra Nm.

Conicaltapered cone — angle must match the wheel

Ball / radiusrounded seat — common on some OEM alloys

Flat / washerflat clamp, often with a shank and washer

Pressures

Tyre	Normal F/R	Laden F/R	Eco F/R	Torque
205/80R15	32 PSI / 32 PSI	—	—	110 Nm
215/75R15	32 PSI / 32 PSI	—	—	110 Nm
235/70R15	32 PSI / 32 PSI	—	—	110 Nm

Fitment specs

1987 Bolt Pattern: 5X127. Recorded centre bore (mm): 65.1.Wheel offset (ET)Recorded offset (ET mm):
1987 Bolt Pattern: 5X127. Recorded centre bore (mm): 65.1.Wheel offset (ET)Recorded offset (ET mm):
1987 Bolt Pattern: 5X127. Recorded centre bore (mm): 65.1.Wheel offset (ET)Recorded offset (ET mm):
1987 Bolt Pattern: 5X127. Recorded centre bore (mm): 65.1.Wheel offset (ET)Recorded offset (ET mm):
1987 Centre Bore: 65.1Sponsored(adsbygoogle=window.adsbygoogle||[]).push({});Understanding wheel f
1987 Centre Bore: 65.1SponsoredUnderstanding wheel fitment measurements: Cadillac BroughamPCD and
1987 Centre Bore: 65.1SponsoredUnderstanding wheel fitment measurements: Cadillac BroughamPCD and
1987 Centre Bore: 65.1SponsoredUnderstanding wheel fitment measurements: Cadillac BroughamPCD and
1987 Offset: centre-bore/","name":"Cadillac Brougham Wheel Fitment, PCD, Offset & Centre Bore
1987 Offset: 15Rear Offset: 15Centre Bore: 65.1SponsoredUnderstanding wheel fitment measureme
1987 Offset: 15Rear Offset: 15Centre Bore: 65.1SponsoredUnderstanding wheel fitment measureme
1987 Offset: 15Rear Offset: 15Centre Bore: 65.1SponsoredUnderstanding wheel fitment measureme
1987 PCD: offset-centre-bore/","name":"Cadillac Brougham Wheel Fitment, PCD, Offset & Cent
1987 PCD: 5X127Front Offset: 15Rear Offset: 15Centre Bore: 65.1SponsoredUnderstanding whee
1987 PCD: 5X127Front Offset: 15Rear Offset: 15Centre Bore: 65.1SponsoredUnderstanding whee
1987 PCD: 5X127Front Offset: 15Rear Offset: 15Centre Bore: 65.1SponsoredUnderstanding whee
1987 Centre bore: 65.1
1987 Front offset: 15
1987 PCD: 5X127
1987 Rear offset: 15
1987 Centre bore: 65.1
1987 Front offset: 15
1987 PCD: 5X127
1987 Rear offset: 15
1987 Centre bore: 65.1
1987 Front offset: 15
1987 PCD: 5X127
1987 Rear offset: 15
1988 Centre bore: 65.1
1988 Front offset: 15
1988 PCD: 5X127
1988 Rear offset: 15
1988 Centre bore: 65.1
1988 Front offset: 15
1988 PCD: 5X127
1988 Rear offset: 15
1988 Centre bore: 65.1
1988 Front offset: 15
1988 PCD: 5X127
1988 Rear offset: 15
1989 Centre bore: 65.1
1989 Front offset: 15
1989 PCD: 5X127
1989 Rear offset: 15
1989 Centre bore: 65.1
1989 Front offset: 15
1989 PCD: 5X127
1989 Rear offset: 15
1989 Centre bore: 65.1
1989 Front offset: 15
1989 PCD: 5X127
1989 Rear offset: 15
1990 Centre bore: 65.1
1990 Front offset: 15
1990 PCD: 5X127
1990 Rear offset: 15
1990 Centre bore: 65.1
1990 Front offset: 15
1990 PCD: 5X127
1990 Rear offset: 15