Cadillac ATS

Workshop data. Confirm against the vehicle placard.

All makes › Cadillac › ATS › 2016

Cold pressures. Final-tighten wheel nuts with a calibrated torque wrench, never an impact gun. Re-check after 25–50 miles.

Wheel nut torque · 2016

140 Nm

225/35R19, 225/40R18, 225/45R17, 235/40R18, 255/30R19, 255/35R18

1 2 3 4
4 bolts
1 4 2 5 3
5 bolts
1 2 6 4 3 5
6 bolts

Use the star / cross order that matches the wheel. Start fasteners by hand. Seat the wheel flush on the hub before final torque. Recheck after 25–50 miles. Confirm against the vehicle placard and handbook.

Pressures Torque Placard Location

Workshop checks

When to torque: every time a wheel is off — tyres, punctures, seasonal swap, brakes.

Seat first: the wheel must sit flush on the hub. Dirt or rust under the wheel means the wrench number is meaningless.

Match the seat: conical, ball/radius and flat/washer seats are not interchangeable. Thread size alone is not enough.

Recheck: after 25–50 miles check the same figure again. Do not add extra Nm.

Conicaltapered cone — angle must match the wheel
Ball / radiusrounded seat — common on some OEM alloys
Flat / washerflat clamp, often with a shank and washer

Pressures

TyreNormal F/RLaden F/REco F/RTorque
225/35R19 34 PSI / 34 PSI — — 140 Nm
225/40R18 34 PSI / 34 PSI — — 140 Nm
225/45R17 34 PSI / 34 PSI — — 140 Nm
235/40R18 34 PSI / 34 PSI — — 140 Nm
255/30R19 34 PSI / 34 PSI — — 140 Nm
255/35R18 34 PSI / 34 PSI — — 140 Nm

Fitment specs

2013 Bolt Pattern: 5X115. Recorded centre bore (mm): 70.3.Wheel offset (ET)Recorded offset (ET mm):
2013 Bolt Pattern: 5X115. Recorded centre bore (mm): 70.3.Wheel offset (ET)Recorded offset (ET mm):
2013 Bolt Pattern: 5X115. Recorded centre bore (mm): 70.3.Wheel offset (ET)Recorded offset (ET mm):
2013 Bolt Pattern: 5X115. Recorded centre bore (mm): 70.3.Wheel offset (ET)Recorded offset (ET mm):
2013 Centre Bore: 70.3Sponsored(adsbygoogle=window.adsbygoogle||[]).push({});Understanding wheel f
2013 Centre Bore: 70.3SponsoredUnderstanding wheel fitment measurements: Cadillac ATSPCD and centr
2013 Centre Bore: 70.3SponsoredUnderstanding wheel fitment measurements: Cadillac ATSPCD and centr
2013 Centre Bore: 70.3SponsoredUnderstanding wheel fitment measurements: Cadillac ATSPCD and centr
2013 Offset: centre-bore/","name":"Cadillac ATS Wheel Fitment, PCD, Offset & Centre Bore | Pu
2013 Offset: 48Rear Offset: 48Centre Bore: 70.3SponsoredUnderstanding wheel fitment measureme
2013 Offset: 48Rear Offset: 48Centre Bore: 70.3SponsoredUnderstanding wheel fitment measureme
2013 Offset: 48Rear Offset: 48Centre Bore: 70.3SponsoredUnderstanding wheel fitment measureme
2013 PCD: offset-centre-bore/","name":"Cadillac ATS Wheel Fitment, PCD, Offset & Centre Bo
2013 PCD: 5X115Front Offset: 48Rear Offset: 48Centre Bore: 70.3SponsoredUnderstanding whee
2013 PCD: 5X115Front Offset: 48Rear Offset: 48Centre Bore: 70.3SponsoredUnderstanding whee
2013 PCD: 5X115Front Offset: 48Rear Offset: 48Centre Bore: 70.3SponsoredUnderstanding whee
2013 Centre bore: 70.3
2013 Front offset: 48
2013 PCD: 5X115
2013 Rear offset: 48
2013 Centre bore: 70.3
2013 Front offset: 48
2013 PCD: 5X115
2013 Rear offset: 48
2013 Centre bore: 70.3
2013 Front offset: 48
2013 PCD: 5X115
2013 Rear offset: 48
2013 Centre bore: 70.3
2013 Front offset: 48
2013 PCD: 5X115
2013 Rear offset: 48
2013 Centre bore: 70.3
2013 Front offset: 48
2013 PCD: 5X115
2013 Rear offset: 48
2013 Centre bore: 70.3
2013 Front offset: 48
2013 PCD: 5X115
2013 Rear offset: 48
2014 Centre bore: 70.3
2014 Front offset: 48
2014 PCD: 5X115
2014 Rear offset: 48
2014 Centre bore: 70.3
2014 Front offset: 48
2014 PCD: 5X115
2014 Rear offset: 48
2014 Centre bore: 70.3
2014 Front offset: 48
2014 PCD: 5X115
2014 Rear offset: 48
2014 Centre bore: 70.3
2014 Front offset: 48
2014 PCD: 5X115
2014 Rear offset: 48
2014 Centre bore: 70.3
2014 Front offset: 48
2014 PCD: 5X115
2014 Rear offset: 48