Buick Rendezvous

Workshop data. Confirm against the vehicle placard.

All makes › Buick › Rendezvous › 2001

Cold pressures. Final-tighten wheel nuts with a calibrated torque wrench, never an impact gun. Re-check after 25–50 miles.

Wheel nut torque · 2001

150 Nm

215/65R16, 225/60R17

1 2 3 4
4 bolts
1 4 2 5 3
5 bolts
1 2 6 4 3 5
6 bolts

Use the star / cross order that matches the wheel. Start fasteners by hand. Seat the wheel flush on the hub before final torque. Recheck after 25–50 miles. Confirm against the vehicle placard and handbook.

Pressures Torque Placard Location

Workshop checks

When to torque: every time a wheel is off — tyres, punctures, seasonal swap, brakes.

Seat first: the wheel must sit flush on the hub. Dirt or rust under the wheel means the wrench number is meaningless.

Match the seat: conical, ball/radius and flat/washer seats are not interchangeable. Thread size alone is not enough.

Recheck: after 25–50 miles check the same figure again. Do not add extra Nm.

Conicaltapered cone — angle must match the wheel
Ball / radiusrounded seat — common on some OEM alloys
Flat / washerflat clamp, often with a shank and washer

Pressures

TyreNormal F/RLaden F/REco F/RTorque
215/65R16 36 PSI / 36 PSI — — 150 Nm
225/60R17 36 PSI / 36 PSI — — 150 Nm

Fitment specs

2001 Bolt Pattern: 5x115. Recorded centre bore (mm): 70.3.Wheel offset (ET)Recorded offset (ET mm):
2001 Bolt Pattern: 5x115. Recorded centre bore (mm): 70.3.Wheel offset (ET)Recorded offset (ET mm):
2001 Bolt Pattern: 5x115. Recorded centre bore (mm): 70.3.Wheel offset (ET)Recorded offset (ET mm):
2001 Bolt Pattern: 5x115. Recorded centre bore (mm): 70.3.Wheel offset (ET)Recorded offset (ET mm):
2001 Centre Bore: 70.3Sponsored(adsbygoogle=window.adsbygoogle||[]).push({});Understanding wheel f
2001 Centre Bore: 70.3SponsoredUnderstanding wheel fitment measurements: Buick RendezvousPCD and c
2001 Centre Bore: 70.3SponsoredUnderstanding wheel fitment measurements: Buick RendezvousPCD and c
2001 Centre Bore: 70.3SponsoredUnderstanding wheel fitment measurements: Buick RendezvousPCD and c
2001 Offset: centre-bore/","name":"Buick Rendezvous Wheel Fitment, PCD, Offset & Centre Bore
2001 Offset: 50Rear Offset: 50Centre Bore: 70.3SponsoredUnderstanding wheel fitment measureme
2001 Offset: 50Rear Offset: 50Centre Bore: 70.3SponsoredUnderstanding wheel fitment measureme
2001 Offset: 50Rear Offset: 50Centre Bore: 70.3SponsoredUnderstanding wheel fitment measureme
2001 PCD: offset-centre-bore/","name":"Buick Rendezvous Wheel Fitment, PCD, Offset & Centr
2001 PCD: 5x115Front Offset: 50Rear Offset: 50Centre Bore: 70.3SponsoredUnderstanding whee
2001 PCD: 5x115Front Offset: 50Rear Offset: 50Centre Bore: 70.3SponsoredUnderstanding whee
2001 PCD: 5x115Front Offset: 50Rear Offset: 50Centre Bore: 70.3SponsoredUnderstanding whee
2001 Centre bore: 70.3
2001 Front offset: 50
2001 PCD: 5x115
2001 Rear offset: 50
2001 Centre bore: 70.3
2001 Front offset: 50
2001 PCD: 5x115
2001 Rear offset: 50
2002 Centre bore: 70.3
2002 Front offset: 50
2002 PCD: 5x115
2002 Rear offset: 50
2002 Centre bore: 70.3
2002 Front offset: 50
2002 PCD: 5x115
2002 Rear offset: 50
2003 Centre bore: 70.3
2003 Front offset: 50
2003 PCD: 5x115
2003 Rear offset: 50
2003 Centre bore: 70.3
2003 Front offset: 50
2003 PCD: 5x115
2003 Rear offset: 50
2004 Centre bore: 70.3
2004 Front offset: 50
2004 PCD: 5x115
2004 Rear offset: 50
2004 Centre bore: 70.3
2004 Front offset: 50
2004 PCD: 5x115
2004 Rear offset: 50
2005 Centre bore: 70.3
2005 Front offset: 50
2005 PCD: 5x115
2005 Rear offset: 50
2005 Centre bore: 70.3
2005 Front offset: 50
2005 PCD: 5x115
2005 Rear offset: 50
2006 Centre bore: 70.3
2006 Front offset: 50
2006 PCD: 5x115
2006 Rear offset: 50