Buick Hearse

Workshop data. Confirm against the vehicle placard.

All makes › Buick › Hearse › 1995

Cold pressures. Final-tighten wheel nuts with a calibrated torque wrench, never an impact gun. Re-check after 25–50 miles.

Wheel nut torque · 1995

110 Nm

225/75R15, 235/70R15

1 2 3 4
4 bolts
1 4 2 5 3
5 bolts
1 2 6 4 3 5
6 bolts

Use the star / cross order that matches the wheel. Start fasteners by hand. Seat the wheel flush on the hub before final torque. Recheck after 25–50 miles. Confirm against the vehicle placard and handbook.

Pressures Torque Placard Location

Workshop checks

When to torque: every time a wheel is off — tyres, punctures, seasonal swap, brakes.

Seat first: the wheel must sit flush on the hub. Dirt or rust under the wheel means the wrench number is meaningless.

Match the seat: conical, ball/radius and flat/washer seats are not interchangeable. Thread size alone is not enough.

Recheck: after 25–50 miles check the same figure again. Do not add extra Nm.

Conicaltapered cone — angle must match the wheel
Ball / radiusrounded seat — common on some OEM alloys
Flat / washerflat clamp, often with a shank and washer

Pressures

TyreNormal F/RLaden F/REco F/RTorque
225/75R15 33 PSI / 33 PSI — — 110 Nm
235/70R15 33 PSI / 33 PSI — — 110 Nm

Fitment specs

1991 Bolt Pattern: 5X127. Recorded centre bore (mm): 70.3.Wheel offset (ET)Recorded offset (ET mm):
1991 Bolt Pattern: 5X127. Recorded centre bore (mm): 70.3.Wheel offset (ET)Recorded offset (ET mm):
1991 Bolt Pattern: 5X127. Recorded centre bore (mm): 70.3.Wheel offset (ET)Recorded offset (ET mm):
1991 Bolt Pattern: 5X127. Recorded centre bore (mm): 70.3.Wheel offset (ET)Recorded offset (ET mm):
1991 Centre Bore: 70.3Sponsored(adsbygoogle=window.adsbygoogle||[]).push({});Understanding wheel f
1991 Centre Bore: 70.3SponsoredUnderstanding wheel fitment measurements: Buick HearsePCD and centr
1991 Centre Bore: 70.3SponsoredUnderstanding wheel fitment measurements: Buick HearsePCD and centr
1991 Centre Bore: 70.3SponsoredUnderstanding wheel fitment measurements: Buick HearsePCD and centr
1991 Offset: centre-bore/","name":"Buick Hearse Wheel Fitment, PCD, Offset & Centre Bore | Pu
1991 Offset: 40Rear Offset: 40Centre Bore: 70.3SponsoredUnderstanding wheel fitment measureme
1991 Offset: 40Rear Offset: 40Centre Bore: 70.3SponsoredUnderstanding wheel fitment measureme
1991 Offset: 40Rear Offset: 40Centre Bore: 70.3SponsoredUnderstanding wheel fitment measureme
1991 PCD: offset-centre-bore/","name":"Buick Hearse Wheel Fitment, PCD, Offset & Centre Bo
1991 PCD: 5X127Front Offset: 40Rear Offset: 40Centre Bore: 70.3SponsoredUnderstanding whee
1991 PCD: 5X127Front Offset: 40Rear Offset: 40Centre Bore: 70.3SponsoredUnderstanding whee
1991 PCD: 5X127Front Offset: 40Rear Offset: 40Centre Bore: 70.3SponsoredUnderstanding whee
1991 Centre bore: 70.3
1991 Front offset: 40
1991 PCD: 5X127
1991 Rear offset: 40
1991 Centre bore: 70.3
1991 Front offset: 40
1991 PCD: 5X127
1991 Rear offset: 40
1992 Centre bore: 70.3
1992 Front offset: 40
1992 PCD: 5X127
1992 Rear offset: 40
1992 Centre bore: 70.3
1992 Front offset: 40
1992 PCD: 5X127
1992 Rear offset: 40
1993 Centre bore: 70.3
1993 Front offset: 40
1993 PCD: 5X127
1993 Rear offset: 40
1993 Centre bore: 70.3
1993 Front offset: 40
1993 PCD: 5X127
1993 Rear offset: 40
1994 Centre bore: 70.3
1994 Front offset: 40
1994 PCD: 5X127
1994 Rear offset: 40
1994 Centre bore: 70.3
1994 Front offset: 40
1994 PCD: 5X127
1994 Rear offset: 40
1995 Centre bore: 70.3
1995 Front offset: 40
1995 PCD: 5X127
1995 Rear offset: 40
1995 Centre bore: 70.3
1995 Front offset: 40
1995 PCD: 5X127
1995 Rear offset: 40
1996 Centre bore: 70.3
1996 Front offset: 40
1996 PCD: 5X127
1996 Rear offset: 40