Buick Excelle

Workshop data. Confirm against the vehicle placard.

All makes › Buick › Excelle › 2015

Cold pressures. Final-tighten wheel nuts with a calibrated torque wrench, never an impact gun. Re-check after 25–50 miles.

Wheel nut torque · 2015

140 Nm

205/60R16, 215/50R17

1 2 3 4
4 bolts
1 4 2 5 3
5 bolts
1 2 6 4 3 5
6 bolts

Use the star / cross order that matches the wheel. Start fasteners by hand. Seat the wheel flush on the hub before final torque. Recheck after 25–50 miles. Confirm against the vehicle placard and handbook.

Pressures Torque Placard Location

Workshop checks

When to torque: every time a wheel is off — tyres, punctures, seasonal swap, brakes.

Seat first: the wheel must sit flush on the hub. Dirt or rust under the wheel means the wrench number is meaningless.

Match the seat: conical, ball/radius and flat/washer seats are not interchangeable. Thread size alone is not enough.

Recheck: after 25–50 miles check the same figure again. Do not add extra Nm.

Conicaltapered cone — angle must match the wheel
Ball / radiusrounded seat — common on some OEM alloys
Flat / washerflat clamp, often with a shank and washer

Pressures

TyreNormal F/RLaden F/REco F/RTorque
205/60R16 32 PSI / 32 PSI — — 140 Nm
215/50R17 32 PSI / 32 PSI — — 140 Nm

Vehicle

2015

Fitment specs

2009 Bolt Pattern: 5x115. Recorded centre bore (mm): 70.3.Wheel offset (ET)Recorded offset (ET mm):
2009 Bolt Pattern: 5x115. Recorded centre bore (mm): 70.3.Wheel offset (ET)Recorded offset (ET mm):
2009 Bolt Pattern: 5x115. Recorded centre bore (mm): 70.3.Wheel offset (ET)Recorded offset (ET mm):
2009 Bolt Pattern: 5x115. Recorded centre bore (mm): 70.3.Wheel offset (ET)Recorded offset (ET mm):
2009 Centre Bore: 70.3Sponsored(adsbygoogle=window.adsbygoogle||[]).push({});Understanding wheel f
2009 Centre Bore: 70.3SponsoredUnderstanding wheel fitment measurements: Buick ExcellePCD and cent
2009 Centre Bore: 70.3SponsoredUnderstanding wheel fitment measurements: Buick ExcellePCD and cent
2009 Centre Bore: 70.3SponsoredUnderstanding wheel fitment measurements: Buick ExcellePCD and cent
2009 Offset: centre-bore/","name":"Buick Excelle Wheel Fitment, PCD, Offset & Centre Bore | P
2009 Offset: 41Rear Offset: 41Centre Bore: 70.3SponsoredUnderstanding wheel fitment measureme
2009 Offset: 41Rear Offset: 41Centre Bore: 70.3SponsoredUnderstanding wheel fitment measureme
2009 Offset: 41Rear Offset: 41Centre Bore: 70.3SponsoredUnderstanding wheel fitment measureme
2009 PCD: offset-centre-bore/","name":"Buick Excelle Wheel Fitment, PCD, Offset & Centre B
2009 PCD: 5x115Front Offset: 41Rear Offset: 41Centre Bore: 70.3SponsoredUnderstanding whee
2009 PCD: 5x115Front Offset: 41Rear Offset: 41Centre Bore: 70.3SponsoredUnderstanding whee
2009 PCD: 5x115Front Offset: 41Rear Offset: 41Centre Bore: 70.3SponsoredUnderstanding whee
2009 Centre bore: 70.3
2009 Front offset: 41
2009 PCD: 5x115
2009 Rear offset: 41
2009 Centre bore: 70.3
2009 Front offset: 41
2009 PCD: 5x115
2009 Rear offset: 41
2010 Centre bore: 70.3
2010 Front offset: 41
2010 PCD: 5x115
2010 Rear offset: 41
2010 Centre bore: 70.3
2010 Front offset: 41
2010 PCD: 5x115
2010 Rear offset: 41
2011 Centre bore: 70.3
2011 Front offset: 41
2011 PCD: 5x115
2011 Rear offset: 41
2011 Centre bore: 70.3
2011 Front offset: 41
2011 PCD: 5x115
2011 Rear offset: 41
2012 Centre bore: 70.3
2012 Front offset: 41
2012 PCD: 5x115
2012 Rear offset: 41
2012 Centre bore: 70.3
2012 Front offset: 41
2012 PCD: 5x115
2012 Rear offset: 41
2013 Centre bore: 70.3
2013 Front offset: 41
2013 PCD: 5x115
2013 Rear offset: 41
2013 Centre bore: 70.3
2013 Front offset: 41
2013 PCD: 5x115
2013 Rear offset: 41
2014 Centre bore: 70.3
2014 Front offset: 41
2014 PCD: 5x115
2014 Rear offset: 41