Bmw 7 Series

Workshop data. Confirm against the vehicle placard.

All makes › Bmw › 7 Series › 2021

Cold pressures. Final-tighten wheel nuts with a calibrated torque wrench, never an impact gun. Re-check after 25–50 miles.

Wheel nut torque · 2021

140 Nm

225/60R17, 245/35R21, 245/40R20, 245/45R19, 245/50R18, 275/30R21, 275/35R20, 275/40R19

1 2 3 4
4 bolts
1 4 2 5 3
5 bolts
1 2 6 4 3 5
6 bolts

Use the star / cross order that matches the wheel. Start fasteners by hand. Seat the wheel flush on the hub before final torque. Recheck after 25–50 miles. Confirm against the vehicle placard and handbook.

Pressures Torque Placard Location

Workshop checks

When to torque: every time a wheel is off — tyres, punctures, seasonal swap, brakes.

Seat first: the wheel must sit flush on the hub. Dirt or rust under the wheel means the wrench number is meaningless.

Match the seat: conical, ball/radius and flat/washer seats are not interchangeable. Thread size alone is not enough.

Recheck: after 25–50 miles check the same figure again. Do not add extra Nm.

Conicaltapered cone — angle must match the wheel
Ball / radiusrounded seat — common on some OEM alloys
Flat / washerflat clamp, often with a shank and washer

Pressures

TyreNormal F/RLaden F/REco F/RTorque
225/60R17 35 PSI / 35 PSI 38 PSI / 44 PSI — 140 Nm
245/35R21 39 PSI / 44 PSI 44 PSI / 46 PSI — 140 Nm
245/40R20 35 PSI / 38 PSI 41 PSI / 45 PSI — 140 Nm
245/45R19 35 PSI / 38 PSI 41 PSI / 45 PSI — 140 Nm
245/50R18 32 PSI / 35 PSI 38 PSI / 44 PSI — 140 Nm
275/30R21 39 PSI / 44 PSI 44 PSI / 46 PSI — 140 Nm
275/35R20 35 PSI / 38 PSI 41 PSI / 45 PSI — 140 Nm
275/40R19 32 PSI / 35 PSI 38 PSI / 44 PSI — 140 Nm

Vehicle