Bmw 3 Series

Workshop data. Confirm against the vehicle placard.

All makes › Bmw › 3 Series › 2015

Cold pressures. Final-tighten wheel nuts with a calibrated torque wrench, never an impact gun. Re-check after 25–50 miles.

Wheel nut torque · 2015

140 Nm

205/60R16, 225/35R20, 225/40R19, 225/45R17, 225/45R18, 225/50R16, 225/50R17, 225/50R18, 225/55R16, 225/55R17

1 2 3 4
4 bolts
1 4 2 5 3
5 bolts
1 2 6 4 3 5
6 bolts

Use the star / cross order that matches the wheel. Start fasteners by hand. Seat the wheel flush on the hub before final torque. Recheck after 25–50 miles. Confirm against the vehicle placard and handbook.

Pressures Torque Placard Location

Workshop checks

When to torque: every time a wheel is off — tyres, punctures, seasonal swap, brakes.

Seat first: the wheel must sit flush on the hub. Dirt or rust under the wheel means the wrench number is meaningless.

Match the seat: conical, ball/radius and flat/washer seats are not interchangeable. Thread size alone is not enough.

Recheck: after 25–50 miles check the same figure again. Do not add extra Nm.

Conicaltapered cone — angle must match the wheel
Ball / radiusrounded seat — common on some OEM alloys
Flat / washerflat clamp, often with a shank and washer

Pressures

TyreNormal F/RLaden F/REco F/RTorque
205/60R16 32 PSI / 36 PSI 42 PSI / 49 PSI — 140 Nm
225/35R20 35 PSI / 38 PSI 44 PSI / 51 PSI — 140 Nm
225/40R19 32 PSI / 36 PSI 42 PSI / 49 PSI — 140 Nm
225/45R17 35 PSI / 38 PSI 38 PSI / 45 PSI — 140 Nm
225/45R18 32 PSI / 35 PSI 38 PSI / 45 PSI — 140 Nm
225/50R16 33 PSI / 36 PSI 38 PSI / 42 PSI — 140 Nm
225/50R17 35 PSI / 38 PSI 38 PSI / 42 PSI — 140 Nm
225/50R17 32 PSI / 35 PSI 38 PSI / 45 PSI — 140 Nm
225/50R18 29 PSI / 35 PSI — — 140 Nm
225/55R16 32 PSI / 35 PSI 38 PSI / 45 PSI — 140 Nm
225/55R17 29 PSI / 32 PSI — — 140 Nm

Vehicle

Bmw 3 Series Other 3 Series variants
2015 Bmw 3 Series Other 3 Series variants
Bmw 3 Series Touring
2015 Bmw 3 Series Touring
Bmw 3 Series Gran Turismo
2015 Bmw 3 Series Gran Turismo

Placard location

3 Series tyre pressure placard location
2015 3 Series tyre pressure placard location

Tyre pressure placard

3 Series tyre pressure placard
2015 3 Series tyre pressure placard

Fitment specs

1998 Bolt Pattern: 5x120. Recorded centre bore (mm): 72.6.Wheel offset (ET)Recorded offset (ET mm):
1998 Bolt Pattern: 5x120. Recorded centre bore (mm): 72.6.Wheel offset (ET)Recorded offset (ET mm):
1998 Bolt Pattern: 5x120. Recorded centre bore (mm): 72.6.Wheel offset (ET)Recorded offset (ET mm):
1998 Bolt Pattern: 5x120. Recorded centre bore (mm): 72.6.Wheel offset (ET)Recorded offset (ET mm):
1998 Centre Bore: 72.605 - 13Tyre sizes225/40R18255/35R18225/35R19255/30R19225/45R17255/40R17PCD:
1998 Centre Bore: 72.605 - 13Tyre sizes225/40R18255/35R18225/35R19255/30R19225/45R17255/40R17PCD:
1998 Centre Bore: 72.605 - 13Tyre sizes225/40R18255/35R18225/35R19255/30R19225/45R17255/40R17PCD:
1998 Centre Bore: 72.605 - 13Tyre sizes225/40R18255/35R18225/35R19255/30R19225/45R17255/40R17PCD:
1998 Offset: centre-bore/","name":"Bmw 3 Series Wheel Fitment, PCD, Offset & Centre Bore | Pu
1998 Offset: 35Rear Offset: 35Centre Bore: 72.605 - 13Tyre sizes225/40R18255/35R18225/35R1925
1998 Offset: 35Rear Offset: 35Centre Bore: 72.605 - 13Tyre sizes225/40R18255/35R18225/35R1925
1998 Offset: 35Rear Offset: 35Centre Bore: 72.605 - 13Tyre sizes225/40R18255/35R18225/35R1925
1998 PCD: offset-centre-bore/","name":"Bmw 3 Series Wheel Fitment, PCD, Offset & Centre Bo
1998 PCD: 5x120Front Offset: 35Rear Offset: 35Centre Bore: 72.605 - 13Tyre sizes225/40R182
1998 PCD: 5x120Front Offset: 35Rear Offset: 35Centre Bore: 72.605 - 13Tyre sizes225/40R182
1998 PCD: 5x120Front Offset: 35Rear Offset: 35Centre Bore: 72.605 - 13Tyre sizes225/40R182
1998 Centre bore: 72.6
1998 Front offset: 35
1998 PCD: 5x120
1998 Rear offset: 35
1998 Centre bore: 72.6
1998 Front offset: 35
1998 PCD: 5x120
1998 Rear offset: 35
1998 Centre bore: 72.6
1998 Front offset: 35
1998 PCD: 5x120
1998 Rear offset: 35
1998 Centre bore: 72.6
1998 Front offset: 35
1998 PCD: 5x120
1998 Rear offset: 35
1998 Centre bore: 72.6
1998 Front offset: 35
1998 PCD: 5x120
1998 Rear offset: 35
1998 Centre bore: 72.6
1998 Front offset: 35
1998 PCD: 5x120
1998 Rear offset: 35
1999 Centre bore: 72.6
1999 Front offset: 35
1999 PCD: 5x120
1999 Rear offset: 35
1999 Centre bore: 72.6
1999 Front offset: 35
1999 PCD: 5x120
1999 Rear offset: 35
1999 Centre bore: 72.6
1999 Front offset: 35
1999 PCD: 5x120
1999 Rear offset: 35
1999 Centre bore: 72.6
1999 Front offset: 35
1999 PCD: 5x120
1999 Rear offset: 35
1999 Centre bore: 72.6
1999 Front offset: 35
1999 PCD: 5x120
1999 Rear offset: 35