Bmw 2 Series

All makes › Bmw › 2 Series › 2021

Cold pressures. Final-tighten wheel nuts with a calibrated torque wrench, never an impact gun. Re-check after 25–50 miles.

Wheel nut torque · 2021

140 Nm

195/55R17, 195/65R16, 205/55R17, 205/60R16, 225/35R19, 225/45R18

4 bolts

5 bolts

6 bolts

Use the star / cross order that matches the wheel. Start fasteners by hand. Seat the wheel flush on the hub before final torque. Recheck after 25–50 miles. Confirm against the vehicle placard and handbook.

Pressures Torque Placard Location

Workshop checks

When to torque: every time a wheel is off — tyres, punctures, seasonal swap, brakes.

Seat first: the wheel must sit flush on the hub. Dirt or rust under the wheel means the wrench number is meaningless.

Match the seat: conical, ball/radius and flat/washer seats are not interchangeable. Thread size alone is not enough.

Recheck: after 25–50 miles check the same figure again. Do not add extra Nm.

Conicaltapered cone — angle must match the wheel

Ball / radiusrounded seat — common on some OEM alloys

Flat / washerflat clamp, often with a shank and washer

Pressures

Tyre	Normal F/R	Laden F/R	Eco F/R	Torque
195/55R17	39 PSI / 36 PSI	44 PSI / 51 PSI	—	140 Nm
195/65R16	38 PSI / 35 PSI	41 PSI / 45 PSI	—	140 Nm
205/55R17	38 PSI / 35 PSI	41 PSI / 48 PSI	—	140 Nm
205/60R16	38 PSI / 35 PSI	41 PSI / 45 PSI	—	140 Nm
225/35R19	33 PSI / 36 PSI	—	—	140 Nm
225/45R18	38 PSI / 35 PSI	41 PSI / 48 PSI	—	140 Nm

Vehicle

Fitment specs

2014 Bolt Pattern: 5x120. Recorded centre bore (mm): 72.6.Wheel offset (ET)Recorded offset (ET mm):
2014 Bolt Pattern: 5x120. Recorded centre bore (mm): 72.6.Wheel offset (ET)Recorded offset (ET mm):
2014 Bolt Pattern: 5x120. Recorded centre bore (mm): 72.6.Wheel offset (ET)Recorded offset (ET mm):
2014 Bolt Pattern: 5x120. Recorded centre bore (mm): 72.6.Wheel offset (ET)Recorded offset (ET mm):
2014 Centre Bore: 72.6Sponsored(adsbygoogle=window.adsbygoogle||[]).push({});Understanding wheel f
2014 Centre Bore: 72.6SponsoredUnderstanding wheel fitment measurements: Bmw 2 SeriesPCD and centr
2014 Centre Bore: 72.6SponsoredUnderstanding wheel fitment measurements: Bmw 2 SeriesPCD and centr
2014 Centre Bore: 72.6SponsoredUnderstanding wheel fitment measurements: Bmw 2 SeriesPCD and centr
2014 Offset: centre-bore/","name":"Bmw 2 Series Wheel Fitment, PCD, Offset & Centre Bore | Pu
2014 Offset: 44Rear Offset: 44Centre Bore: 72.6SponsoredUnderstanding wheel fitment measureme
2014 Offset: 44Rear Offset: 44Centre Bore: 72.6SponsoredUnderstanding wheel fitment measureme
2014 Offset: 44Rear Offset: 44Centre Bore: 72.6SponsoredUnderstanding wheel fitment measureme
2014 PCD: offset-centre-bore/","name":"Bmw 2 Series Wheel Fitment, PCD, Offset & Centre Bo
2014 PCD: 5x120Front Offset: 44Rear Offset: 44Centre Bore: 72.6SponsoredUnderstanding whee
2014 PCD: 5x120Front Offset: 44Rear Offset: 44Centre Bore: 72.6SponsoredUnderstanding whee
2014 PCD: 5x120Front Offset: 44Rear Offset: 44Centre Bore: 72.6SponsoredUnderstanding whee
2014 Centre bore: 72.6
2014 Front offset: 44
2014 PCD: 5x120
2014 Rear offset: 44
2014 Centre bore: 72.6
2014 Front offset: 44
2014 PCD: 5x120
2014 Rear offset: 44
2014 Centre bore: 72.6
2014 Front offset: 44
2014 PCD: 5x120
2014 Rear offset: 44
2014 Centre bore: 72.6
2014 Front offset: 44
2014 PCD: 5x120
2014 Rear offset: 44
2014 Centre bore: 72.6
2014 Front offset: 44
2014 PCD: 5x120
2014 Rear offset: 44
2014 Centre bore: 72.6
2014 Front offset: 44
2014 PCD: 5x120
2014 Rear offset: 44
2015 Centre bore: 72.6
2015 Front offset: 44
2015 PCD: 5x120
2015 Rear offset: 44
2015 Centre bore: 72.6
2015 Front offset: 44
2015 PCD: 5x120
2015 Rear offset: 44
2015 Centre bore: 72.6
2015 Front offset: 44
2015 PCD: 5x120
2015 Rear offset: 44
2015 Centre bore: 72.6
2015 Front offset: 44
2015 PCD: 5x120
2015 Rear offset: 44
2015 Centre bore: 72.6
2015 Front offset: 44
2015 PCD: 5x120
2015 Rear offset: 44