Audi A1

Workshop data. Confirm against the vehicle placard.

All makes › Audi › A1 › 2014

Cold pressures. Final-tighten wheel nuts with a calibrated torque wrench, never an impact gun. Re-check after 25–50 miles.

Wheel nut torque · 2014

120 Nm

185/60R15, 195/50R16, 205/55R16, 215/40R17, 215/45R16, 225/35R18

1 2 3 4
4 bolts
1 4 2 5 3
5 bolts
1 2 6 4 3 5
6 bolts

Use the star / cross order that matches the wheel. Start fasteners by hand. Seat the wheel flush on the hub before final torque. Recheck after 25–50 miles. Confirm against the vehicle placard and handbook.

Pressures Torque Placard Location

Workshop checks

When to torque: every time a wheel is off — tyres, punctures, seasonal swap, brakes.

Seat first: the wheel must sit flush on the hub. Dirt or rust under the wheel means the wrench number is meaningless.

Match the seat: conical, ball/radius and flat/washer seats are not interchangeable. Thread size alone is not enough.

Recheck: after 25–50 miles check the same figure again. Do not add extra Nm.

Conicaltapered cone — angle must match the wheel
Ball / radiusrounded seat — common on some OEM alloys
Flat / washerflat clamp, often with a shank and washer

Pressures

TyreNormal F/RLaden F/REco F/RTorque
185/60R15 38 PSI / 32 PSI 38 PSI / 36 PSI — 120 Nm
195/50R16 38 PSI / 32 PSI 38 PSI / 36 PSI — 120 Nm
205/55R16 32 PSI / 29 PSI 38 PSI / 36 PSI — 120 Nm
215/40R17 36 PSI / 32 PSI 38 PSI / 36 PSI — 120 Nm
215/45R16 32 PSI / 29 PSI 38 PSI / 36 PSI — 120 Nm
225/35R18 36 PSI / 32 PSI 39 PSI / 36 PSI — 120 Nm

Vehicle

Fitment specs

2010 Bolt Pattern: 5x100. Recorded centre bore (mm): 57.1 mm.Wheel offset (ET)Recorded offset (ET m
2010 Bolt Pattern: 5x100. Recorded centre bore (mm): 57.1 mm.Wheel offset (ET)Recorded offset (ET m
2010 Bolt Pattern: 5x100. Recorded centre bore (mm): 57.1 mm.Wheel offset (ET)Recorded offset (ET m
2010 Bolt Pattern: 5x100. Recorded centre bore (mm): 57.1 mm.Wheel offset (ET)Recorded offset (ET m
2010 Centre Bore: 57.1 mm10 - 19 · 1.0 TFSI; 1.4 TFSI/COD; 1.8 TFSI; 1.4 TDI; 1.6 TDI; 2.0 TDI (m
2010 Centre Bore: 57.1 mm10 - 19 · 1.0 TFSI; 1.4 TFSI/COD; 1.8 TFSI; 1.4 TDI; 1.6 TDI; 2.0 TDI (m
2010 Centre Bore: 57.1 mm10 - 19 · 1.0 TFSI; 1.4 TFSI/COD; 1.8 TFSI; 1.4 TDI; 1.6 TDI; 2.0 TDI (m
2010 Centre Bore: 57.1 mm10 - 19 · 1.0 TFSI; 1.4 TFSI/COD; 1.8 TFSI; 1.4 TDI; 1.6 TDI; 2.0 TDI (m
2010 Offset: centre-bore/","name":"Audi A1 Wheel Fitment, PCD, Offset & Centre Bore | Pure Ty
2010 Offset: ET29Rear Offset: ET29Centre Bore: 57.1 mm10 - 19 · 1.0 TFSI; 1.4 TFSI/COD; 1.8
2010 Offset: ET29Rear Offset: ET29Centre Bore: 57.1 mm10 - 19 · 1.0 TFSI; 1.4 TFSI/COD; 1.8
2010 Offset: ET29Rear Offset: ET29Centre Bore: 57.1 mm10 - 19 · 1.0 TFSI; 1.4 TFSI/COD; 1.8
2010 Oil: type-capacity/","name":"Audi A1 Engine Oil Type & Capacity | Pure Tyre","descrip
2010 PCD: offset-centre-bore/","name":"Audi A1 Wheel Fitment, PCD, Offset & Centre Bore |
2010 PCD: 5x100Front Offset: ET29Rear Offset: ET29Centre Bore: 57.1 mm10 - 19 · 1.0 TFSI;
2010 PCD: 5x100Front Offset: ET29Rear Offset: ET29Centre Bore: 57.1 mm10 - 19 · 1.0 TFSI;
2010 PCD: 5x100Front Offset: ET29Rear Offset: ET29Centre Bore: 57.1 mm10 - 19 · 1.0 TFSI;
2010 Centre bore: 57.1 mm
2010 Front offset: ET29
2010 Oil specification: Audi/VW engine-specific approval required MY2018 1.0 TFSI 95 PS: VW 502 00
2010 PCD: 5x100
2010 Rear offset: ET29
2010 Centre bore: 57.1 mm
2010 Front offset: ET30
2010 Oil specification: Audi/VW engine-specific approval required MY2018 1.0 TFSI 95 PS: VW 502 00
2010 PCD: 5x100
2010 Rear offset: ET30
2010 Centre bore: 57.1 mm
2010 Oil specification: Audi/VW engine-specific approval required MY2018 1.0 TFSI 95 PS: VW 502 00
2010 PCD: 5x100
2010 Centre bore: 57.1 mm
2010 Front offset: ET36
2010 Oil specification: Audi/VW engine-specific approval required MY2018 1.0 TFSI 95 PS: VW 502 00
2010 PCD: 5x100
2010 Rear offset: ET36
2010 Centre bore: 57.1 mm
2010 Front offset: ET34
2010 Oil specification: Audi/VW engine-specific approval required MY2018 1.0 TFSI 95 PS: VW 502 00
2010 PCD: 5x100
2010 Rear offset: ET34
2010 Centre bore: 57.1 mm
2010 Front offset: ET39.5
2010 Oil specification: Audi/VW engine-specific approval required MY2018 1.0 TFSI 95 PS: VW 502 00
2010 PCD: 5x100
2010 Rear offset: ET39.5
2011 Centre bore: 57.1 mm
2011 Front offset: ET29