Alfa Romeo MiTo

All makes › Alfa Romeo › MiTo › 2026

Cold pressures. Final-tighten wheel nuts with a calibrated torque wrench, never an impact gun. Re-check after 25–50 miles.

Wheel nut torque · 2026

120 Nm

185/65R15, 195/55R16, 205/45R17, 215/40R18, 215/45R17

4 bolts

5 bolts

6 bolts

Use the star / cross order that matches the wheel. Start fasteners by hand. Seat the wheel flush on the hub before final torque. Recheck after 25–50 miles. Confirm against the vehicle placard and handbook.

Pressures Torque Placard Location

Workshop checks

When to torque: every time a wheel is off — tyres, punctures, seasonal swap, brakes.

Seat first: the wheel must sit flush on the hub. Dirt or rust under the wheel means the wrench number is meaningless.

Match the seat: conical, ball/radius and flat/washer seats are not interchangeable. Thread size alone is not enough.

Recheck: after 25–50 miles check the same figure again. Do not add extra Nm.

Conicaltapered cone — angle must match the wheel

Ball / radiusrounded seat — common on some OEM alloys

Flat / washerflat clamp, often with a shank and washer

Pressures

Tyre	Normal F/R	Laden F/R	Eco F/R	Torque
185/65R15	33 PSI / 30 PSI	33 PSI / 33 PSI	—	120 Nm
195/55R16	33 PSI / 30 PSI	33 PSI / 33 PSI	—	120 Nm
205/45R17	35 PSI / 32 PSI	41 PSI / 36 PSI	—	120 Nm
215/40R18	33 PSI / 30 PSI	33 PSI / 33 PSI	—	120 Nm
215/45R17	32 PSI / 30 PSI	33 PSI / 33 PSI	—	120 Nm

Vehicle

Fitment specs

2008 Bolt Pattern: 4x98. Recorded centre bore (mm): 58.1.Wheel offset (ET)Recorded offset (ET mm):
2008 Bolt Pattern: 4x98. Recorded centre bore (mm): 58.1.Wheel offset (ET)Recorded offset (ET mm):
2008 Bolt Pattern: 4x98. Recorded centre bore (mm): 58.1.Wheel offset (ET)Recorded offset (ET mm):
2008 Bolt Pattern: 4x98. Recorded centre bore (mm): 58.1.Wheel offset (ET)Recorded offset (ET mm):
2008 Centre Bore: 58.1Sponsored(adsbygoogle=window.adsbygoogle||[]).push({});Understanding wheel f
2008 Centre Bore: 58.1SponsoredUnderstanding wheel fitment measurements: Alfa Romeo MiToPCD and ce
2008 Centre Bore: 58.1SponsoredUnderstanding wheel fitment measurements: Alfa Romeo MiToPCD and ce
2008 Centre Bore: 58.1SponsoredUnderstanding wheel fitment measurements: Alfa Romeo MiToPCD and ce
2008 Offset: centre-bore/","name":"Alfa Romeo MiTo Wheel Fitment, PCD, Offset & Centre Bore |
2008 Offset: 39Rear Offset: 39Centre Bore: 58.1SponsoredUnderstanding wheel fitment measureme
2008 Offset: 39Rear Offset: 39Centre Bore: 58.1SponsoredUnderstanding wheel fitment measureme
2008 Offset: 39Rear Offset: 39Centre Bore: 58.1SponsoredUnderstanding wheel fitment measureme
2008 Oil: type-capacity/","name":"Alfa Romeo MiTo Engine Oil Type & Capacity | Pure Tyre",
2008 PCD: offset-centre-bore/","name":"Alfa Romeo MiTo Wheel Fitment, PCD, Offset & Centre
2008 PCD: 4x98Front Offset: 39Rear Offset: 39Centre Bore: 58.1SponsoredUnderstanding wheel
2008 PCD: 4x98Front Offset: 39Rear Offset: 39Centre Bore: 58.1SponsoredUnderstanding wheel
2008 PCD: 4x98Front Offset: 39Rear Offset: 39Centre Bore: 58.1SponsoredUnderstanding wheel
2008 Centre bore: 58.1
2008 Front offset: 39
2008 PCD: 4x98
2008 Rear offset: 39
2008 Centre bore: 58.1
2008 Front offset: 39
2008 PCD: 4x98
2008 Rear offset: 39
2008 Centre bore: 58.1
2008 Front offset: 39
2008 PCD: 4x98
2008 Rear offset: 39
2008 Centre bore: 58.1
2008 Front offset: 39
2008 PCD: 4x98
2008 Rear offset: 39
2008 Centre bore: 58.1
2008 Front offset: 39
2008 PCD: 4x98
2008 Rear offset: 39
2009 Centre bore: 58.1
2009 Front offset: 39
2009 PCD: 4x98
2009 Rear offset: 39
2009 Centre bore: 58.1