Alfa Romeo Giulietta

All makes › Alfa Romeo › Giulietta › 2026

Cold pressures. Final-tighten wheel nuts with a calibrated torque wrench, never an impact gun. Re-check after 25–50 miles.

Wheel nut torque · 2026

86 Nm

195/55R16, 205/55R16, 225/40R18, 225/45R17

4 bolts

5 bolts

6 bolts

Use the star / cross order that matches the wheel. Start fasteners by hand. Seat the wheel flush on the hub before final torque. Recheck after 25–50 miles. Confirm against the vehicle placard and handbook.

Pressures Torque Placard Location

Workshop checks

When to torque: every time a wheel is off — tyres, punctures, seasonal swap, brakes.

Seat first: the wheel must sit flush on the hub. Dirt or rust under the wheel means the wrench number is meaningless.

Match the seat: conical, ball/radius and flat/washer seats are not interchangeable. Thread size alone is not enough.

Recheck: after 25–50 miles check the same figure again. Do not add extra Nm.

Conicaltapered cone — angle must match the wheel

Ball / radiusrounded seat — common on some OEM alloys

Flat / washerflat clamp, often with a shank and washer

Pressures

Tyre	Normal F/R	Laden F/R	Eco F/R	Torque
195/55R16	38 PSI / 32 PSI	42 PSI / 36 PSI	—	86 Nm
205/55R16	33 PSI / 30 PSI	36 PSI / 30 PSI	—	86 Nm
225/40R18	36 PSI / 33 PSI	42 PSI / 36 PSI	—	86 Nm
225/45R17	33 PSI / 30 PSI	38 PSI / 32 PSI	—	86 Nm

Vehicle

Fitment specs

2015 Bolt Pattern: 5x110. Recorded centre bore (mm): 65.1.Wheel offset (ET)Recorded offset (ET mm):
2015 Bolt Pattern: 5x110. Recorded centre bore (mm): 65.1.Wheel offset (ET)Recorded offset (ET mm):
2015 Bolt Pattern: 5x110. Recorded centre bore (mm): 65.1.Wheel offset (ET)Recorded offset (ET mm):
2015 Bolt Pattern: 5x110. Recorded centre bore (mm): 65.1.Wheel offset (ET)Recorded offset (ET mm):
2015 Centre Bore: 65.1Sponsored(adsbygoogle=window.adsbygoogle||[]).push({});Understanding wheel f
2015 Centre Bore: 65.1SponsoredUnderstanding wheel fitment measurements: Alfa Romeo GiuliettaPCD a
2015 Centre Bore: 65.1SponsoredUnderstanding wheel fitment measurements: Alfa Romeo GiuliettaPCD a
2015 Centre Bore: 65.1SponsoredUnderstanding wheel fitment measurements: Alfa Romeo GiuliettaPCD a
2015 Offset: centre-bore/","name":"Alfa Romeo Giulietta Wheel Fitment, PCD, Offset & Centre B
2015 Offset: 41Rear Offset: 41Centre Bore: 65.1SponsoredUnderstanding wheel fitment measureme
2015 Offset: 41Rear Offset: 41Centre Bore: 65.1SponsoredUnderstanding wheel fitment measureme
2015 Offset: 41Rear Offset: 41Centre Bore: 65.1SponsoredUnderstanding wheel fitment measureme
2015 Oil: type-capacity/","name":"Alfa Romeo Giulietta Engine Oil Type & Capacity | Pure T
2015 PCD: offset-centre-bore/","name":"Alfa Romeo Giulietta Wheel Fitment, PCD, Offset & C
2015 PCD: 5x110Front Offset: 41Rear Offset: 41Centre Bore: 65.1SponsoredUnderstanding whee
2015 PCD: 5x110Front Offset: 41Rear Offset: 41Centre Bore: 65.1SponsoredUnderstanding whee
2015 PCD: 5x110Front Offset: 41Rear Offset: 41Centre Bore: 65.1SponsoredUnderstanding whee
2015 Centre bore: 65.1
2015 Front offset: 41
2015 PCD: 5x110
2015 Rear offset: 41
2015 Centre bore: 65.1
2015 Front offset: 41
2015 PCD: 5x110
2015 Rear offset: 41
2015 Centre bore: 65.1
2015 Front offset: 41
2015 PCD: 5x110
2015 Rear offset: 41
2015 Centre bore: 65.1
2015 Front offset: 41
2015 PCD: 5x110
2015 Rear offset: 41
2016 Centre bore: 65.1
2016 Front offset: 41
2016 PCD: 5x110
2016 Rear offset: 41
2016 Centre bore: 65.1
2016 Front offset: 41
2016 PCD: 5x110
2016 Rear offset: 41
2016 Centre bore: 65.1