Alfa Romeo Giulia Quadrifoglio

All makes › Alfa Romeo › Giulia Quadrifoglio › 2026

Cold pressures. Final-tighten wheel nuts with a calibrated torque wrench, never an impact gun. Re-check after 25–50 miles.

Wheel nut torque · 2026

130 Nm

245/35R19, 285/30R19

4 bolts

5 bolts

6 bolts

Use the star / cross order that matches the wheel. Start fasteners by hand. Seat the wheel flush on the hub before final torque. Recheck after 25–50 miles. Confirm against the vehicle placard and handbook.

Pressures Torque Placard Location

Workshop checks

When to torque: every time a wheel is off — tyres, punctures, seasonal swap, brakes.

Seat first: the wheel must sit flush on the hub. Dirt or rust under the wheel means the wrench number is meaningless.

Match the seat: conical, ball/radius and flat/washer seats are not interchangeable. Thread size alone is not enough.

Recheck: after 25–50 miles check the same figure again. Do not add extra Nm.

Conicaltapered cone — angle must match the wheel

Ball / radiusrounded seat — common on some OEM alloys

Flat / washerflat clamp, often with a shank and washer

Pressures

Tyre	Normal F/R	Laden F/R	Eco F/R	Torque
245/35R19	35 PSI / 32 PSI	42 PSI / 42 PSI	—	130 Nm
285/30R19	35 PSI / 32 PSI	42 PSI / 42 PSI	—	130 Nm

Vehicle

Tyre pressure placard

Fitment specs

2015 Bolt Pattern: 5x110. Recorded centre bore (mm): 65.1.Wheel offset (ET)Recorded offset (ET mm):
2015 Bolt Pattern: 5x110. Recorded centre bore (mm): 65.1.Wheel offset (ET)Recorded offset (ET mm):
2015 Bolt Pattern: 5x110. Recorded centre bore (mm): 65.1.Wheel offset (ET)Recorded offset (ET mm):
2015 Bolt Pattern: 5x110. Recorded centre bore (mm): 65.1.Wheel offset (ET)Recorded offset (ET mm):
2015 Centre Bore: 65.1Sponsored(adsbygoogle=window.adsbygoogle||[]).push({});Understanding wheel f
2015 Centre Bore: 65.1SponsoredUnderstanding wheel fitment measurements: Alfa Romeo Giulia Quadrif
2015 Centre Bore: 65.1SponsoredUnderstanding wheel fitment measurements: Alfa Romeo Giulia Quadrif
2015 Centre Bore: 65.1SponsoredUnderstanding wheel fitment measurements: Alfa Romeo Giulia Quadrif
2015 Offset: centre-bore/","name":"Alfa Romeo Giulia Quadrifoglio Wheel Fitment, PCD, Offset
2015 Offset: 33Rear Offset: 33Centre Bore: 65.1SponsoredUnderstanding wheel fitment measureme
2015 Offset: 33Rear Offset: 33Centre Bore: 65.1SponsoredUnderstanding wheel fitment measureme
2015 Offset: 33Rear Offset: 33Centre Bore: 65.1SponsoredUnderstanding wheel fitment measureme
2015 Oil: type-capacity/","name":"Alfa Romeo Giulia Quadrifoglio Engine Oil Type & Capacit
2015 PCD: offset-centre-bore/","name":"Alfa Romeo Giulia Quadrifoglio Wheel Fitment, PCD,
2015 PCD: 5x110Front Offset: 33Rear Offset: 33Centre Bore: 65.1SponsoredUnderstanding whee
2015 PCD: 5x110Front Offset: 33Rear Offset: 33Centre Bore: 65.1SponsoredUnderstanding whee
2015 PCD: 5x110Front Offset: 33Rear Offset: 33Centre Bore: 65.1SponsoredUnderstanding whee
2015 Centre bore: 65.1
2015 Front offset: 33
2015 Oil capacity: 6.5 L including filter
2015 Oil specification: SAE 5W-40 ACEA C3, FIAT 9.55535-GH2
2015 PCD: 5x110
2015 Rear offset: 33
2015 Centre bore: 65.1
2015 Front offset: 33
2015 Oil capacity: 6.5 L including filter
2015 Oil specification: SAE 5W-40 ACEA C3, FIAT 9.55535-GH2
2015 PCD: 5x110
2015 Rear offset: 33
2016 Centre bore: 65.1
2016 Front offset: 33
2016 Oil capacity: 6.5 L including filter
2016 Oil specification: SAE 5W-40 ACEA C3, FIAT 9.55535-GH2
2016 PCD: 5x110
2016 Rear offset: 33
2016 Centre bore: 65.1
2016 Front offset: 33
2016 Oil capacity: 6.5 L including filter
2016 Oil specification: SAE 5W-40 ACEA C3, FIAT 9.55535-GH2
2016 PCD: 5x110
2016 Rear offset: 33
2017 Centre bore: 65.1
2017 Front offset: 33
2017 Oil capacity: 6.5 L including filter
2017 Oil specification: SAE 5W-40 ACEA C3, FIAT 9.55535-GH2
2017 PCD: 5x110
2017 Rear offset: 33
2017 Centre bore: 65.1
2017 Front offset: 33
2017 Oil capacity: 6.5 L including filter
2017 Oil specification: SAE 5W-40 ACEA C3, FIAT 9.55535-GH2
2017 PCD: 5x110
2017 Rear offset: 33
2018 Centre bore: 65.1