Alfa Romeo Giulia

All makes › Alfa Romeo › Giulia › 2023

Cold pressures. Final-tighten wheel nuts with a calibrated torque wrench, never an impact gun. Re-check after 25–50 miles.

Wheel nut torque · 2023

130 Nm

225/40R19, 225/45R18, 225/50R17, 255/35R19

4 bolts

5 bolts

6 bolts

Use the star / cross order that matches the wheel. Start fasteners by hand. Seat the wheel flush on the hub before final torque. Recheck after 25–50 miles. Confirm against the vehicle placard and handbook.

Pressures Torque Placard Location

Workshop checks

When to torque: every time a wheel is off — tyres, punctures, seasonal swap, brakes.

Seat first: the wheel must sit flush on the hub. Dirt or rust under the wheel means the wrench number is meaningless.

Match the seat: conical, ball/radius and flat/washer seats are not interchangeable. Thread size alone is not enough.

Recheck: after 25–50 miles check the same figure again. Do not add extra Nm.

Conicaltapered cone — angle must match the wheel

Ball / radiusrounded seat — common on some OEM alloys

Flat / washerflat clamp, often with a shank and washer

Pressures

Tyre	Normal F/R	Laden F/R	Eco F/R	Torque
225/40R19	35 PSI / 33 PSI	39 PSI / 42 PSI	—	130 Nm
225/45R18	32 PSI / 35 PSI	39 PSI / 44 PSI	—	130 Nm
225/50R17	32 PSI / 35 PSI	39 PSI / 44 PSI	—	130 Nm
255/35R19	35 PSI / 33 PSI	39 PSI / 42 PSI	—	130 Nm

Fitment specs

2015 Bolt Pattern: 5x110. Recorded centre bore (mm): 65.1.Wheel offset (ET)Recorded offset (ET mm):
2015 Bolt Pattern: 5x110. Recorded centre bore (mm): 65.1.Wheel offset (ET)Recorded offset (ET mm):
2015 Bolt Pattern: 5x110. Recorded centre bore (mm): 65.1.Wheel offset (ET)Recorded offset (ET mm):
2015 Bolt Pattern: 5x110. Recorded centre bore (mm): 65.1.Wheel offset (ET)Recorded offset (ET mm):
2015 Centre Bore: 65.1Sponsored(adsbygoogle=window.adsbygoogle||[]).push({});Understanding wheel f
2015 Centre Bore: 65.1SponsoredUnderstanding wheel fitment measurements: Alfa Romeo GiuliaPCD and
2015 Centre Bore: 65.1SponsoredUnderstanding wheel fitment measurements: Alfa Romeo GiuliaPCD and
2015 Centre Bore: 65.1SponsoredUnderstanding wheel fitment measurements: Alfa Romeo GiuliaPCD and
2015 Offset: centre-bore/","name":"Alfa Romeo Giulia Wheel Fitment, PCD, Offset & Centre Bore
2015 Offset: 33Rear Offset: 33Centre Bore: 65.1SponsoredUnderstanding wheel fitment measureme
2015 Offset: 33Rear Offset: 33Centre Bore: 65.1SponsoredUnderstanding wheel fitment measureme
2015 Offset: 33Rear Offset: 33Centre Bore: 65.1SponsoredUnderstanding wheel fitment measureme
2015 Oil: type-capacity/","name":"Alfa Romeo Giulia Engine Oil Type & Capacity | Pure Tyre
2015 PCD: offset-centre-bore/","name":"Alfa Romeo Giulia Wheel Fitment, PCD, Offset & Cent
2015 PCD: 5x110Front Offset: 33Rear Offset: 33Centre Bore: 65.1SponsoredUnderstanding whee
2015 PCD: 5x110Front Offset: 33Rear Offset: 33Centre Bore: 65.1SponsoredUnderstanding whee
2015 PCD: 5x110Front Offset: 33Rear Offset: 33Centre Bore: 65.1SponsoredUnderstanding whee
2015 Centre bore: 65.1
2015 Front offset: 33
2015 PCD: 5x110
2015 Rear offset: 33
2015 Centre bore: 65.1
2015 Front offset: 33
2015 PCD: 5x110
2015 Rear offset: 33
2015 Centre bore: 65.1
2015 Front offset: 33
2015 PCD: 5x110
2015 Rear offset: 33
2015 Centre bore: 65.1
2015 Front offset: 33
2015 PCD: 5x110
2015 Rear offset: 33
2016 Centre bore: 65.1
2016 Front offset: 33
2016 PCD: 5x110
2016 Rear offset: 33
2016 Centre bore: 65.1
2016 Front offset: 33
2016 PCD: 5x110
2016 Rear offset: 33
2016 Centre bore: 65.1