Fiat Toro

All makes › Fiat › Toro › 2023

Cold pressures. Final-tighten wheel nuts with a calibrated torque wrench, never an impact gun. Re-check after 25–50 miles.

Wheel nut torque · 2023

135 Nm

215/65R16, 225/60R16, 255/55R18

4 bolts

5 bolts

6 bolts

Use the star / cross order that matches the wheel. Start fasteners by hand. Seat the wheel flush on the hub before final torque. Recheck after 25–50 miles. Confirm against the vehicle placard and handbook.

Pressures Torque Placard Location

Workshop checks

When to torque: every time a wheel is off — tyres, punctures, seasonal swap, brakes.

Seat first: the wheel must sit flush on the hub. Dirt or rust under the wheel means the wrench number is meaningless.

Match the seat: conical, ball/radius and flat/washer seats are not interchangeable. Thread size alone is not enough.

Recheck: after 25–50 miles check the same figure again. Do not add extra Nm.

Conicaltapered cone — angle must match the wheel

Ball / radiusrounded seat — common on some OEM alloys

Flat / washerflat clamp, often with a shank and washer

Pressures

Tyre	Normal F/R	Laden F/R	Eco F/R	Torque
215/65R16	34 PSI / 34 PSI	—	—	135 Nm
225/60R16	34 PSI / 34 PSI	—	—	135 Nm
255/55R18	34 PSI / 34 PSI	—	—	135 Nm

Vehicle

Fitment specs

2016 Bolt Pattern: 5x110. Recorded centre bore (mm): 65.1.Wheel offset (ET)Recorded offset (ET mm):
2016 Bolt Pattern: 5x110. Recorded centre bore (mm): 65.1.Wheel offset (ET)Recorded offset (ET mm):
2016 Bolt Pattern: 5x110. Recorded centre bore (mm): 65.1.Wheel offset (ET)Recorded offset (ET mm):
2016 Bolt Pattern: 5x110. Recorded centre bore (mm): 65.1.Wheel offset (ET)Recorded offset (ET mm):
2016 Centre Bore: 65.1Sponsored(adsbygoogle=window.adsbygoogle||[]).push({});Understanding wheel f
2016 Centre Bore: 65.1SponsoredUnderstanding wheel fitment measurements: Fiat ToroPCD and centre b
2016 Centre Bore: 65.1SponsoredUnderstanding wheel fitment measurements: Fiat ToroPCD and centre b
2016 Centre Bore: 65.1SponsoredUnderstanding wheel fitment measurements: Fiat ToroPCD and centre b
2016 Offset: centre-bore/","name":"Fiat Toro Wheel Fitment, PCD, Offset & Centre Bore | Pure
2016 Offset: 40Rear Offset: 40Centre Bore: 65.1SponsoredUnderstanding wheel fitment measureme
2016 Offset: 40Rear Offset: 40Centre Bore: 65.1SponsoredUnderstanding wheel fitment measureme
2016 Offset: 40Rear Offset: 40Centre Bore: 65.1SponsoredUnderstanding wheel fitment measureme
2016 PCD: offset-centre-bore/","name":"Fiat Toro Wheel Fitment, PCD, Offset & Centre Bore
2016 PCD: 5x110Front Offset: 40Rear Offset: 40Centre Bore: 65.1SponsoredUnderstanding whee
2016 PCD: 5x110Front Offset: 40Rear Offset: 40Centre Bore: 65.1SponsoredUnderstanding whee
2016 PCD: 5x110Front Offset: 40Rear Offset: 40Centre Bore: 65.1SponsoredUnderstanding whee
2016 Centre bore: 65.1
2016 Front offset: 40
2016 PCD: 5x110
2016 Rear offset: 40
2016 Centre bore: 65.1
2016 Front offset: 40
2016 PCD: 5x110
2016 Rear offset: 40
2016 Centre bore: 65.1
2016 Front offset: 40
2016 PCD: 5x110
2016 Rear offset: 40
2017 Centre bore: 65.1
2017 Front offset: 40
2017 PCD: 5x110
2017 Rear offset: 40
2017 Centre bore: 65.1
2017 Front offset: 40
2017 PCD: 5x110
2017 Rear offset: 40
2017 Centre bore: 65.1
2017 Front offset: 40
2017 PCD: 5x110
2017 Rear offset: 40
2018 Centre bore: 65.1
2018 Front offset: 40
2018 PCD: 5x110
2018 Rear offset: 40
2018 Centre bore: 65.1
2018 Front offset: 40
2018 PCD: 5x110
2018 Rear offset: 40
2018 Centre bore: 65.1
2018 Front offset: 40
2018 PCD: 5x110
2018 Rear offset: 40
2019 Centre bore: 65.1
2019 Front offset: 40
2019 PCD: 5x110
2019 Rear offset: 40
2019 Centre bore: 65.1
2019 Front offset: 40
2019 PCD: 5x110
2019 Rear offset: 40