Fiat Tipo

All makes › Fiat › Tipo › 2016

Cold pressures. Final-tighten wheel nuts with a calibrated torque wrench, never an impact gun. Re-check after 25–50 miles.

Wheel nut torque · 2016

130 Nm

195/65R15, 205/55R16, 225/40R18, 225/45R17

4 bolts

5 bolts

6 bolts

Use the star / cross order that matches the wheel. Start fasteners by hand. Seat the wheel flush on the hub before final torque. Recheck after 25–50 miles. Confirm against the vehicle placard and handbook.

Pressures Torque Placard Location

Workshop checks

When to torque: every time a wheel is off — tyres, punctures, seasonal swap, brakes.

Seat first: the wheel must sit flush on the hub. Dirt or rust under the wheel means the wrench number is meaningless.

Match the seat: conical, ball/radius and flat/washer seats are not interchangeable. Thread size alone is not enough.

Recheck: after 25–50 miles check the same figure again. Do not add extra Nm.

Conicaltapered cone — angle must match the wheel

Ball / radiusrounded seat — common on some OEM alloys

Flat / washerflat clamp, often with a shank and washer

Pressures

Tyre	Normal F/R	Laden F/R	Eco F/R	Torque
195/65R15	31 PSI / 32 PSI	—	—	130 Nm
205/55R16	31 PSI / 32 PSI	—	—	130 Nm
225/40R18	31 PSI / 32 PSI	—	—	130 Nm
225/45R17	31 PSI / 32 PSI	—	—	130 Nm

Vehicle

Fitment specs

2015 Bolt Pattern: 4x100. Recorded centre bore (mm): 54.1.Wheel offset (ET)Recorded offset (ET mm):
2015 Bolt Pattern: 4x100. Recorded centre bore (mm): 54.1.Wheel offset (ET)Recorded offset (ET mm):
2015 Bolt Pattern: 4x100. Recorded centre bore (mm): 54.1.Wheel offset (ET)Recorded offset (ET mm):
2015 Bolt Pattern: 4x100. Recorded centre bore (mm): 54.1.Wheel offset (ET)Recorded offset (ET mm):
2015 Centre Bore: 54.1Sponsored(adsbygoogle=window.adsbygoogle||[]).push({});Understanding wheel f
2015 Centre Bore: 54.1SponsoredUnderstanding wheel fitment measurements: Fiat TipoPCD and centre b
2015 Centre Bore: 54.1SponsoredUnderstanding wheel fitment measurements: Fiat TipoPCD and centre b
2015 Centre Bore: 54.1SponsoredUnderstanding wheel fitment measurements: Fiat TipoPCD and centre b
2015 Offset: centre-bore/","name":"Fiat Tipo Wheel Fitment, PCD, Offset & Centre Bore | Pure
2015 Offset: 45Rear Offset: 45Centre Bore: 54.1SponsoredUnderstanding wheel fitment measureme
2015 Offset: 45Rear Offset: 45Centre Bore: 54.1SponsoredUnderstanding wheel fitment measureme
2015 Offset: 45Rear Offset: 45Centre Bore: 54.1SponsoredUnderstanding wheel fitment measureme
2015 PCD: offset-centre-bore/","name":"Fiat Tipo Wheel Fitment, PCD, Offset & Centre Bore
2015 PCD: 4x100Front Offset: 45Rear Offset: 45Centre Bore: 54.1SponsoredUnderstanding whee
2015 PCD: 4x100Front Offset: 45Rear Offset: 45Centre Bore: 54.1SponsoredUnderstanding whee
2015 PCD: 4x100Front Offset: 45Rear Offset: 45Centre Bore: 54.1SponsoredUnderstanding whee
2015 Centre bore: 54.1
2015 Front offset: 45
2015 PCD: 4x100
2015 Rear offset: 45
2015 Centre bore: 54.1
2015 Front offset: 45
2015 PCD: 4x100
2015 Rear offset: 45
2015 Centre bore: 54.1
2015 Front offset: 45
2015 PCD: 4x100
2015 Rear offset: 45
2015 Centre bore: 54.1
2015 Front offset: 45
2015 PCD: 4x100
2015 Rear offset: 45
2016 Centre bore: 54.1
2016 Front offset: 45
2016 PCD: 4x100
2016 Rear offset: 45
2016 Centre bore: 54.1
2016 Front offset: 45
2016 PCD: 4x100
2016 Rear offset: 45
2016 Centre bore: 54.1
2016 Front offset: 45
2016 PCD: 4x100
2016 Rear offset: 45
2016 Centre bore: 54.1
2016 Front offset: 45
2016 PCD: 4x100
2016 Rear offset: 45
2017 Centre bore: 54.1
2017 Front offset: 45
2017 PCD: 4x100
2017 Rear offset: 45
2017 Centre bore: 54.1
2017 Front offset: 45
2017 PCD: 4x100
2017 Rear offset: 45
2017 Centre bore: 54.1
2017 Front offset: 45
2017 PCD: 4x100
2017 Rear offset: 45