Fiat Sedici

All makes › Fiat › Sedici › 2013

Cold pressures. Final-tighten wheel nuts with a calibrated torque wrench, never an impact gun. Re-check after 25–50 miles.

Wheel nut torque · 2013

85 Nm

195/65R15, 205/60R16

4 bolts

5 bolts

6 bolts

Use the star / cross order that matches the wheel. Start fasteners by hand. Seat the wheel flush on the hub before final torque. Recheck after 25–50 miles. Confirm against the vehicle placard and handbook.

Pressures Torque Placard Location

Workshop checks

When to torque: every time a wheel is off — tyres, punctures, seasonal swap, brakes.

Seat first: the wheel must sit flush on the hub. Dirt or rust under the wheel means the wrench number is meaningless.

Match the seat: conical, ball/radius and flat/washer seats are not interchangeable. Thread size alone is not enough.

Recheck: after 25–50 miles check the same figure again. Do not add extra Nm.

Conicaltapered cone — angle must match the wheel

Ball / radiusrounded seat — common on some OEM alloys

Flat / washerflat clamp, often with a shank and washer

Pressures

Tyre	Normal F/R	Laden F/R	Eco F/R	Torque
195/65R15	35 PSI / 33 PSI	—	—	85 Nm
205/60R16	35 PSI / 33 PSI	—	— / 40 PSI	85 Nm

Vehicle

Fitment specs

2006 Bolt Pattern: 5x114.3. Recorded centre bore (mm): 60.1.Wheel offset (ET)Recorded offset (ET mm
2006 Bolt Pattern: 5x114.3. Recorded centre bore (mm): 60.1.Wheel offset (ET)Recorded offset (ET mm
2006 Bolt Pattern: 5x114.3. Recorded centre bore (mm): 60.1.Wheel offset (ET)Recorded offset (ET mm
2006 Bolt Pattern: 5x114.3. Recorded centre bore (mm): 60.1.Wheel offset (ET)Recorded offset (ET mm
2006 Centre Bore: 60.1Sponsored(adsbygoogle=window.adsbygoogle||[]).push({});Understanding wheel f
2006 Centre Bore: 60.1SponsoredUnderstanding wheel fitment measurements: Fiat SediciPCD and centre
2006 Centre Bore: 60.1SponsoredUnderstanding wheel fitment measurements: Fiat SediciPCD and centre
2006 Centre Bore: 60.1SponsoredUnderstanding wheel fitment measurements: Fiat SediciPCD and centre
2006 Offset: centre-bore/","name":"Fiat Sedici Wheel Fitment, PCD, Offset & Centre Bore | Pur
2006 Offset: 50Rear Offset: 50Centre Bore: 60.1SponsoredUnderstanding wheel fitment measureme
2006 Offset: 50Rear Offset: 50Centre Bore: 60.1SponsoredUnderstanding wheel fitment measureme
2006 Offset: 50Rear Offset: 50Centre Bore: 60.1SponsoredUnderstanding wheel fitment measureme
2006 PCD: offset-centre-bore/","name":"Fiat Sedici Wheel Fitment, PCD, Offset & Centre Bor
2006 PCD: 5x114.3Front Offset: 50Rear Offset: 50Centre Bore: 60.1SponsoredUnderstanding wh
2006 PCD: 5x114.3Front Offset: 50Rear Offset: 50Centre Bore: 60.1SponsoredUnderstanding wh
2006 PCD: 5x114.3Front Offset: 50Rear Offset: 50Centre Bore: 60.1SponsoredUnderstanding wh
2006 Centre bore: 60.1
2006 Front offset: 50
2006 PCD: 5x114.3
2006 Rear offset: 50
2006 Centre bore: 60.1
2006 Front offset: 50
2006 PCD: 5x114.3
2006 Rear offset: 50
2007 Centre bore: 60.1
2007 Front offset: 50
2007 PCD: 5x114.3
2007 Rear offset: 50
2007 Centre bore: 60.1
2007 Front offset: 50
2007 PCD: 5x114.3
2007 Rear offset: 50
2008 Centre bore: 60.1
2008 Front offset: 50
2008 PCD: 5x114.3
2008 Rear offset: 50
2008 Centre bore: 60.1
2008 Front offset: 50
2008 PCD: 5x114.3
2008 Rear offset: 50
2009 Centre bore: 60.1
2009 Front offset: 50
2009 PCD: 5x114.3
2009 Rear offset: 50
2009 Centre bore: 60.1
2009 Front offset: 50
2009 PCD: 5x114.3
2009 Rear offset: 50
2010 Centre bore: 60.1
2010 Front offset: 50
2010 PCD: 5x114.3
2010 Rear offset: 50
2010 Centre bore: 60.1
2010 Front offset: 50
2010 PCD: 5x114.3
2010 Rear offset: 50
2011 Centre bore: 60.1
2011 Front offset: 50
2011 PCD: 5x114.3
2011 Rear offset: 50