Fiat Scudo

Workshop data. Confirm against the vehicle placard.

All makes › Fiat › Scudo › 2013

Cold pressures. Final-tighten wheel nuts with a calibrated torque wrench, never an impact gun. Re-check after 25–50 miles.

Wheel nut torque · 2013

100 Nm

215/60R16

1 2 3 4
4 bolts
1 4 2 5 3
5 bolts
1 2 6 4 3 5
6 bolts

Use the star / cross order that matches the wheel. Start fasteners by hand. Seat the wheel flush on the hub before final torque. Recheck after 25–50 miles. Confirm against the vehicle placard and handbook.

Pressures Torque Placard Location

Workshop checks

When to torque: every time a wheel is off — tyres, punctures, seasonal swap, brakes.

Seat first: the wheel must sit flush on the hub. Dirt or rust under the wheel means the wrench number is meaningless.

Match the seat: conical, ball/radius and flat/washer seats are not interchangeable. Thread size alone is not enough.

Recheck: after 25–50 miles check the same figure again. Do not add extra Nm.

Conicaltapered cone — angle must match the wheel
Ball / radiusrounded seat — common on some OEM alloys
Flat / washerflat clamp, often with a shank and washer

Pressures

TyreNormal F/RLaden F/REco F/RTorque
215/60R16 45 PSI / 54 PSI — — 100 Nm

Vehicle

Fiat Scudo
2013 Fiat Scudo

Fitment specs

1995 Bolt Pattern: 5x108. Recorded centre bore (mm): 65.1.Wheel offset (ET)Recorded offset (ET mm):
1995 Bolt Pattern: 5x108. Recorded centre bore (mm): 65.1.Wheel offset (ET)Recorded offset (ET mm):
1995 Bolt Pattern: 5x108. Recorded centre bore (mm): 65.1.Wheel offset (ET)Recorded offset (ET mm):
1995 Bolt Pattern: 5x108. Recorded centre bore (mm): 65.1.Wheel offset (ET)Recorded offset (ET mm):
1995 Centre Bore: 65.195 - 07Tyre sizes195/70R14PCD: 5x108Front Offset: 39Rear Offset: Not recorde
1995 Centre Bore: 65.195 - 07Tyre sizes195/70R14PCD: 5x108Front Offset: 39Rear Offset: Not recorde
1995 Centre Bore: 65.195 - 07Tyre sizes195/70R14PCD: 5x108Front Offset: 39Rear Offset: Not recorde
1995 Centre Bore: 65.195 - 07Tyre sizes195/70R14PCD: 5x108Front Offset: 39Rear Offset: Not recorde
1995 Offset: centre-bore/","name":"Fiat Scudo Wheel Fitment, PCD, Offset & Centre Bore | Pure
1995 Offset: 39Rear Offset: 39Centre Bore: 65.195 - 07Tyre sizes195/70R14PCD: 5x108Front Offs
1995 Offset: 39Rear Offset: 39Centre Bore: 65.195 - 07Tyre sizes195/70R14PCD: 5x108Front Offs
1995 Offset: 39Rear Offset: 39Centre Bore: 65.195 - 07Tyre sizes195/70R14PCD: 5x108Front Offs
1995 PCD: offset-centre-bore/","name":"Fiat Scudo Wheel Fitment, PCD, Offset & Centre Bore
1995 PCD: 5x108Front Offset: 39Rear Offset: 39Centre Bore: 65.195 - 07Tyre sizes195/70R14P
1995 PCD: 5x108Front Offset: 39Rear Offset: 39Centre Bore: 65.195 - 07Tyre sizes195/70R14P
1995 PCD: 5x108Front Offset: 39Rear Offset: 39Centre Bore: 65.195 - 07Tyre sizes195/70R14P
1995 Centre bore: 65.1
1995 Front offset: 39
1995 PCD: 5x108
1995 Centre bore: 65.1
1995 Front offset: 39
1995 PCD: 5x108
1995 Rear offset: 39
1996 Centre bore: 65.1
1996 Front offset: 39
1996 PCD: 5x108
1996 Centre bore: 65.1
1996 Front offset: 39
1996 PCD: 5x108
1996 Rear offset: 39
1997 Centre bore: 65.1
1997 Front offset: 39
1997 PCD: 5x108
1997 Centre bore: 65.1
1997 Front offset: 39
1997 PCD: 5x108
1997 Rear offset: 39
1998 Centre bore: 65.1
1998 Front offset: 39
1998 PCD: 5x108
1998 Centre bore: 65.1
1998 Front offset: 39
1998 PCD: 5x108
1998 Rear offset: 39
1999 Centre bore: 65.1
1999 Front offset: 39
1999 PCD: 5x108
1999 Centre bore: 65.1
1999 Front offset: 39
1999 PCD: 5x108
1999 Rear offset: 39
2000 Centre bore: 65.1
2000 Front offset: 39
2000 PCD: 5x108
2000 Centre bore: 65.1
2000 Front offset: 39
2000 PCD: 5x108
2000 Rear offset: 39
2001 Centre bore: 65.1
2001 Front offset: 39