Fiat Panda Van

All makes › Fiat › Panda Van › 1990

Cold pressures. Final-tighten wheel nuts with a calibrated torque wrench, never an impact gun. Re-check after 25–50 miles.

Wheel nut torque · 1990

86 Nm

135/80R13, 155/65R13

4 bolts

5 bolts

6 bolts

Use the star / cross order that matches the wheel. Start fasteners by hand. Seat the wheel flush on the hub before final torque. Recheck after 25–50 miles. Confirm against the vehicle placard and handbook.

Pressures Torque Placard Location

Workshop checks

When to torque: every time a wheel is off — tyres, punctures, seasonal swap, brakes.

Seat first: the wheel must sit flush on the hub. Dirt or rust under the wheel means the wrench number is meaningless.

Match the seat: conical, ball/radius and flat/washer seats are not interchangeable. Thread size alone is not enough.

Recheck: after 25–50 miles check the same figure again. Do not add extra Nm.

Conicaltapered cone — angle must match the wheel

Ball / radiusrounded seat — common on some OEM alloys

Flat / washerflat clamp, often with a shank and washer

Pressures

Tyre	Normal F/R	Laden F/R	Eco F/R	Torque
135/80R13	26 PSI / 29 PSI	—	—	86 Nm
155/65R13	26 PSI / 29 PSI	—	—	86 Nm

Vehicle

Fitment specs

1986 Bolt Pattern: 4x98. Recorded centre bore (mm): 58.6.Wheel offset (ET)Recorded offset (ET mm):
1986 Bolt Pattern: 4x98. Recorded centre bore (mm): 58.6.Wheel offset (ET)Recorded offset (ET mm):
1986 Bolt Pattern: 4x98. Recorded centre bore (mm): 58.6.Wheel offset (ET)Recorded offset (ET mm):
1986 Bolt Pattern: 4x98. Recorded centre bore (mm): 58.6.Wheel offset (ET)Recorded offset (ET mm):
1986 Centre Bore: 58.6Sponsored(adsbygoogle=window.adsbygoogle||[]).push({});Understanding wheel f
1986 Centre Bore: 58.6SponsoredUnderstanding wheel fitment measurements: Fiat Panda VanPCD and cen
1986 Centre Bore: 58.6SponsoredUnderstanding wheel fitment measurements: Fiat Panda VanPCD and cen
1986 Centre Bore: 58.6SponsoredUnderstanding wheel fitment measurements: Fiat Panda VanPCD and cen
1986 Offset: centre-bore/","name":"Fiat Panda Van Wheel Fitment, PCD, Offset & Centre Bore |
1986 Offset: 41Rear Offset: 41Centre Bore: 58.6SponsoredUnderstanding wheel fitment measureme
1986 Offset: 41Rear Offset: 41Centre Bore: 58.6SponsoredUnderstanding wheel fitment measureme
1986 Offset: 41Rear Offset: 41Centre Bore: 58.6SponsoredUnderstanding wheel fitment measureme
1986 PCD: offset-centre-bore/","name":"Fiat Panda Van Wheel Fitment, PCD, Offset & Centre
1986 PCD: 4x98Front Offset: 41Rear Offset: 41Centre Bore: 58.6SponsoredUnderstanding wheel
1986 PCD: 4x98Front Offset: 41Rear Offset: 41Centre Bore: 58.6SponsoredUnderstanding wheel
1986 PCD: 4x98Front Offset: 41Rear Offset: 41Centre Bore: 58.6SponsoredUnderstanding wheel
1986 Centre bore: 58.6
1986 Front offset: 41
1986 PCD: 4x98
1986 Rear offset: 41
1986 Centre bore: 58.6
1986 Front offset: 41
1986 PCD: 4x98
1986 Rear offset: 41
1987 Centre bore: 58.6
1987 Front offset: 41
1987 PCD: 4x98
1987 Rear offset: 41
1987 Centre bore: 58.6
1987 Front offset: 41
1987 PCD: 4x98
1987 Rear offset: 41
1988 Centre bore: 58.6
1988 Front offset: 41
1988 PCD: 4x98
1988 Rear offset: 41
1988 Centre bore: 58.6
1988 Front offset: 41
1988 PCD: 4x98
1988 Rear offset: 41
1989 Centre bore: 58.6
1989 Front offset: 41
1989 PCD: 4x98
1989 Rear offset: 41
1989 Centre bore: 58.6
1989 Front offset: 41
1989 PCD: 4x98
1989 Rear offset: 41
1990 Centre bore: 58.6
1990 Front offset: 41
1990 PCD: 4x98
1990 Rear offset: 41
1990 Centre bore: 58.6
1990 Front offset: 41
1990 PCD: 4x98
1990 Rear offset: 41
1991 Centre bore: 58.6
1991 Front offset: 41
1991 PCD: 4x98
1991 Rear offset: 41