Fiat Panda

Workshop data. Confirm against the vehicle placard.

All makes › Fiat › Panda › 2008

Cold pressures. Final-tighten wheel nuts with a calibrated torque wrench, never an impact gun. Re-check after 25–50 miles.

Wheel nut torque · 2008

86 Nm

155/80R13, 165/65R14

1 2 3 4
4 bolts
1 4 2 5 3
5 bolts
1 2 6 4 3 5
6 bolts

Use the star / cross order that matches the wheel. Start fasteners by hand. Seat the wheel flush on the hub before final torque. Recheck after 25–50 miles. Confirm against the vehicle placard and handbook.

Pressures Torque Placard Location

Workshop checks

When to torque: every time a wheel is off — tyres, punctures, seasonal swap, brakes.

Seat first: the wheel must sit flush on the hub. Dirt or rust under the wheel means the wrench number is meaningless.

Match the seat: conical, ball/radius and flat/washer seats are not interchangeable. Thread size alone is not enough.

Recheck: after 25–50 miles check the same figure again. Do not add extra Nm.

Conicaltapered cone — angle must match the wheel
Ball / radiusrounded seat — common on some OEM alloys
Flat / washerflat clamp, often with a shank and washer

Pressures

TyreNormal F/RLaden F/REco F/RTorque
155/80R13 29 PSI / 26 PSI — — 86 Nm
165/65R14 29 PSI / 26 PSI — — 86 Nm

Vehicle

Fiat Panda
2008 Fiat Panda

Fitment specs

2003 Bolt Pattern: 4x98. Recorded centre bore (mm): 58.1.Wheel offset (ET)Recorded offset (ET mm) v
2003 Bolt Pattern: 4x98. Recorded centre bore (mm): 58.1.Wheel offset (ET)Recorded offset (ET mm) v
2003 Bolt Pattern: 4x98. Recorded centre bore (mm): 58.1.Wheel offset (ET)Recorded offset (ET mm) v
2003 Bolt Pattern: 4x98. Recorded centre bore (mm): 58.1.Wheel offset (ET)Recorded offset (ET mm) v
2003 Centre Bore: 58.103 - 12Tyre sizes155/80R13165/65R14PCD: 4x98Front Offset: 38Rear Offset: 38C
2003 Centre Bore: 58.103 - 12Tyre sizes155/80R13165/65R14PCD: 4x98Front Offset: 38Rear Offset: 38C
2003 Centre Bore: 58.103 - 12Tyre sizes155/80R13165/65R14PCD: 4x98Front Offset: 38Rear Offset: 38C
2003 Centre Bore: 58.103 - 12Tyre sizes155/80R13165/65R14PCD: 4x98Front Offset: 38Rear Offset: 38C
2003 Offset: centre-bore/","name":"Fiat Panda Wheel Fitment, PCD, Offset & Centre Bore | Pure
2003 Offset: 35Rear Offset: 35Centre Bore: 58.103 - 12Tyre sizes155/80R13165/65R14PCD: 4x98Fr
2003 Offset: 35Rear Offset: 35Centre Bore: 58.103 - 12Tyre sizes155/80R13165/65R14PCD: 4x98Fr
2003 Offset: 35Rear Offset: 35Centre Bore: 58.103 - 12Tyre sizes155/80R13165/65R14PCD: 4x98Fr
2003 PCD: offset-centre-bore/","name":"Fiat Panda Wheel Fitment, PCD, Offset & Centre Bore
2003 PCD: 4x98Front Offset: 35Rear Offset: 35Centre Bore: 58.103 - 12Tyre sizes155/80R1316
2003 PCD: 4x98Front Offset: 35Rear Offset: 35Centre Bore: 58.103 - 12Tyre sizes155/80R1316
2003 PCD: 4x98Front Offset: 35Rear Offset: 35Centre Bore: 58.103 - 12Tyre sizes155/80R1316
2003 Centre bore: 58.1
2003 Front offset: 38
2003 PCD: 4x98
2003 Rear offset: 38
2003 Centre bore: 58.1
2003 Front offset: 38
2003 PCD: 4x98
2003 Rear offset: 38
2004 Centre bore: 58.1
2004 Front offset: 38
2004 PCD: 4x98
2004 Rear offset: 38
2004 Centre bore: 58.1
2004 Front offset: 38
2004 PCD: 4x98
2004 Rear offset: 38
2005 Centre bore: 58.1
2005 Front offset: 38
2005 PCD: 4x98
2005 Rear offset: 38
2005 Centre bore: 58.1
2005 Front offset: 38
2005 PCD: 4x98
2005 Rear offset: 38
2006 Centre bore: 58.1
2006 Front offset: 38
2006 PCD: 4x98
2006 Rear offset: 38
2006 Centre bore: 58.1
2006 Front offset: 38
2006 PCD: 4x98
2006 Rear offset: 38
2007 Centre bore: 58.1
2007 Front offset: 38
2007 PCD: 4x98
2007 Rear offset: 38
2007 Centre bore: 58.1
2007 Front offset: 38
2007 PCD: 4x98
2007 Rear offset: 38
2008 Centre bore: 58.1
2008 Front offset: 38
2008 PCD: 4x98
2008 Rear offset: 38