Fiat Palio

All makes › Fiat › Palio › 2005

Cold pressures. Final-tighten wheel nuts with a calibrated torque wrench, never an impact gun. Re-check after 25–50 miles.

Wheel nut torque · 2005

86 Nm

175/65R14, 175/70R14

4 bolts

5 bolts

6 bolts

Use the star / cross order that matches the wheel. Start fasteners by hand. Seat the wheel flush on the hub before final torque. Recheck after 25–50 miles. Confirm against the vehicle placard and handbook.

Pressures Torque Placard Location

Workshop checks

When to torque: every time a wheel is off — tyres, punctures, seasonal swap, brakes.

Seat first: the wheel must sit flush on the hub. Dirt or rust under the wheel means the wrench number is meaningless.

Match the seat: conical, ball/radius and flat/washer seats are not interchangeable. Thread size alone is not enough.

Recheck: after 25–50 miles check the same figure again. Do not add extra Nm.

Conicaltapered cone — angle must match the wheel

Ball / radiusrounded seat — common on some OEM alloys

Flat / washerflat clamp, often with a shank and washer

Pressures

Tyre	Normal F/R	Laden F/R	Eco F/R	Torque
175/65R14	29 PSI / 29 PSI	—	—	86 Nm
175/70R14	29 PSI / 29 PSI	—	—	86 Nm

Vehicle

Fitment specs

1997 Bolt Pattern: 4x98. Recorded centre bore (mm): 58.1.Wheel offset (ET)Recorded offset (ET mm):
1997 Bolt Pattern: 4x98. Recorded centre bore (mm): 58.1.Wheel offset (ET)Recorded offset (ET mm):
1997 Bolt Pattern: 4x98. Recorded centre bore (mm): 58.1.Wheel offset (ET)Recorded offset (ET mm):
1997 Bolt Pattern: 4x98. Recorded centre bore (mm): 58.1.Wheel offset (ET)Recorded offset (ET mm):
1997 Centre Bore: 58.1Sponsored(adsbygoogle=window.adsbygoogle||[]).push({});Understanding wheel f
1997 Centre Bore: 58.1SponsoredUnderstanding wheel fitment measurements: Fiat PalioPCD and centre
1997 Centre Bore: 58.1SponsoredUnderstanding wheel fitment measurements: Fiat PalioPCD and centre
1997 Centre Bore: 58.1SponsoredUnderstanding wheel fitment measurements: Fiat PalioPCD and centre
1997 Offset: centre-bore/","name":"Fiat Palio Wheel Fitment, PCD, Offset & Centre Bore | Pure
1997 Offset: 44Rear Offset: 44Centre Bore: 58.1SponsoredUnderstanding wheel fitment measureme
1997 Offset: 44Rear Offset: 44Centre Bore: 58.1SponsoredUnderstanding wheel fitment measureme
1997 Offset: 44Rear Offset: 44Centre Bore: 58.1SponsoredUnderstanding wheel fitment measureme
1997 PCD: offset-centre-bore/","name":"Fiat Palio Wheel Fitment, PCD, Offset & Centre Bore
1997 PCD: 4x98Front Offset: 44Rear Offset: 44Centre Bore: 58.1SponsoredUnderstanding wheel
1997 PCD: 4x98Front Offset: 44Rear Offset: 44Centre Bore: 58.1SponsoredUnderstanding wheel
1997 PCD: 4x98Front Offset: 44Rear Offset: 44Centre Bore: 58.1SponsoredUnderstanding wheel
1997 Centre bore: 58.1
1997 Front offset: 44
1997 PCD: 4x98
1997 Rear offset: 44
1997 Centre bore: 58.1
1997 Front offset: 44
1997 PCD: 4x98
1997 Rear offset: 44
1998 Centre bore: 58.1
1998 Front offset: 44
1998 PCD: 4x98
1998 Rear offset: 44
1998 Centre bore: 58.1
1998 Front offset: 44
1998 PCD: 4x98
1998 Rear offset: 44
1999 Centre bore: 58.1
1999 Front offset: 44
1999 PCD: 4x98
1999 Rear offset: 44
1999 Centre bore: 58.1
1999 Front offset: 44
1999 PCD: 4x98
1999 Rear offset: 44
2000 Centre bore: 58.1
2000 Front offset: 44
2000 PCD: 4x98
2000 Rear offset: 44
2000 Centre bore: 58.1
2000 Front offset: 44
2000 PCD: 4x98
2000 Rear offset: 44
2001 Centre bore: 58.1
2001 Front offset: 44
2001 PCD: 4x98
2001 Rear offset: 44
2001 Centre bore: 58.1
2001 Front offset: 44
2001 PCD: 4x98
2001 Rear offset: 44
2002 Centre bore: 58.1
2002 Front offset: 44
2002 PCD: 4x98
2002 Rear offset: 44