Fiat Ottimo

All makes › Fiat › Ottimo › 2018

Cold pressures. Final-tighten wheel nuts with a calibrated torque wrench, never an impact gun. Re-check after 25–50 miles.

Wheel nut torque · 2018

120 Nm

205/50R17, 205/55R16, 225/45R17

4 bolts

5 bolts

6 bolts

Use the star / cross order that matches the wheel. Start fasteners by hand. Seat the wheel flush on the hub before final torque. Recheck after 25–50 miles. Confirm against the vehicle placard and handbook.

Pressures Torque Placard Location

Workshop checks

When to torque: every time a wheel is off — tyres, punctures, seasonal swap, brakes.

Seat first: the wheel must sit flush on the hub. Dirt or rust under the wheel means the wrench number is meaningless.

Match the seat: conical, ball/radius and flat/washer seats are not interchangeable. Thread size alone is not enough.

Recheck: after 25–50 miles check the same figure again. Do not add extra Nm.

Conicaltapered cone — angle must match the wheel

Ball / radiusrounded seat — common on some OEM alloys

Flat / washerflat clamp, often with a shank and washer

Pressures

Tyre	Normal F/R	Laden F/R	Eco F/R	Torque
205/50R17	33 PSI / 33 PSI	—	—	120 Nm
205/55R16	33 PSI / 33 PSI	—	—	120 Nm
225/45R17	33 PSI / 33 PSI	—	—	120 Nm

Vehicle

Fitment specs

2014 Bolt Pattern: 5x110. Recorded centre bore (mm): 67.1.Wheel offset (ET)Recorded offset (ET mm):
2014 Bolt Pattern: 5x110. Recorded centre bore (mm): 67.1.Wheel offset (ET)Recorded offset (ET mm):
2014 Bolt Pattern: 5x110. Recorded centre bore (mm): 67.1.Wheel offset (ET)Recorded offset (ET mm):
2014 Bolt Pattern: 5x110. Recorded centre bore (mm): 67.1.Wheel offset (ET)Recorded offset (ET mm):
2014 Centre Bore: 67.1Sponsored(adsbygoogle=window.adsbygoogle||[]).push({});Understanding wheel f
2014 Centre Bore: 67.1SponsoredUnderstanding wheel fitment measurements: Fiat OttimoPCD and centre
2014 Centre Bore: 67.1SponsoredUnderstanding wheel fitment measurements: Fiat OttimoPCD and centre
2014 Centre Bore: 67.1SponsoredUnderstanding wheel fitment measurements: Fiat OttimoPCD and centre
2014 Offset: centre-bore/","name":"Fiat Ottimo Wheel Fitment, PCD, Offset & Centre Bore | Pur
2014 Offset: 46Rear Offset: 46Centre Bore: 67.1SponsoredUnderstanding wheel fitment measureme
2014 Offset: 46Rear Offset: 46Centre Bore: 67.1SponsoredUnderstanding wheel fitment measureme
2014 Offset: 46Rear Offset: 46Centre Bore: 67.1SponsoredUnderstanding wheel fitment measureme
2014 PCD: offset-centre-bore/","name":"Fiat Ottimo Wheel Fitment, PCD, Offset & Centre Bor
2014 PCD: 5x110Front Offset: 46Rear Offset: 46Centre Bore: 67.1SponsoredUnderstanding whee
2014 PCD: 5x110Front Offset: 46Rear Offset: 46Centre Bore: 67.1SponsoredUnderstanding whee
2014 PCD: 5x110Front Offset: 46Rear Offset: 46Centre Bore: 67.1SponsoredUnderstanding whee
2014 Centre bore: 67.1
2014 Front offset: 46
2014 PCD: 5x110
2014 Rear offset: 46
2014 Centre bore: 67.1
2014 Front offset: 46
2014 PCD: 5x110
2014 Rear offset: 46
2014 Centre bore: 67.1
2014 Front offset: 46
2014 PCD: 5x110
2014 Rear offset: 46
2015 Centre bore: 67.1
2015 Front offset: 46
2015 PCD: 5x110
2015 Rear offset: 46
2015 Centre bore: 67.1
2015 Front offset: 46
2015 PCD: 5x110
2015 Rear offset: 46
2015 Centre bore: 67.1
2015 Front offset: 46
2015 PCD: 5x110
2015 Rear offset: 46
2016 Centre bore: 67.1
2016 Front offset: 46
2016 PCD: 5x110
2016 Rear offset: 46
2016 Centre bore: 67.1
2016 Front offset: 46
2016 PCD: 5x110
2016 Rear offset: 46
2016 Centre bore: 67.1
2016 Front offset: 46
2016 PCD: 5x110
2016 Rear offset: 46
2017 Centre bore: 67.1
2017 Front offset: 46
2017 PCD: 5x110
2017 Rear offset: 46
2017 Centre bore: 67.1
2017 Front offset: 46
2017 PCD: 5x110
2017 Rear offset: 46