Fiat Mobi

All makes › Fiat › Mobi › 2021

Cold pressures. Final-tighten wheel nuts with a calibrated torque wrench, never an impact gun. Re-check after 25–50 miles.

Wheel nut torque · 2021

120 Nm

165/70R13, 175/60R15, 175/65R14

4 bolts

5 bolts

6 bolts

Use the star / cross order that matches the wheel. Start fasteners by hand. Seat the wheel flush on the hub before final torque. Recheck after 25–50 miles. Confirm against the vehicle placard and handbook.

Pressures Torque Placard Location

Workshop checks

When to torque: every time a wheel is off — tyres, punctures, seasonal swap, brakes.

Seat first: the wheel must sit flush on the hub. Dirt or rust under the wheel means the wrench number is meaningless.

Match the seat: conical, ball/radius and flat/washer seats are not interchangeable. Thread size alone is not enough.

Recheck: after 25–50 miles check the same figure again. Do not add extra Nm.

Conicaltapered cone — angle must match the wheel

Ball / radiusrounded seat — common on some OEM alloys

Flat / washerflat clamp, often with a shank and washer

Pressures

Tyre	Normal F/R	Laden F/R	Eco F/R	Torque
165/70R13	30 PSI / 30 PSI	—	—	120 Nm
175/60R15	30 PSI / 30 PSI	—	—	120 Nm
175/65R14	30 PSI / 30 PSI	—	—	120 Nm

Vehicle

Fitment specs

2016 Bolt Pattern: 4x98. Recorded centre bore (mm): 58.1.Wheel offset (ET)Recorded offset (ET mm):
2016 Bolt Pattern: 4x98. Recorded centre bore (mm): 58.1.Wheel offset (ET)Recorded offset (ET mm):
2016 Bolt Pattern: 4x98. Recorded centre bore (mm): 58.1.Wheel offset (ET)Recorded offset (ET mm):
2016 Bolt Pattern: 4x98. Recorded centre bore (mm): 58.1.Wheel offset (ET)Recorded offset (ET mm):
2016 Centre Bore: 58.1Sponsored(adsbygoogle=window.adsbygoogle||[]).push({});Understanding wheel f
2016 Centre Bore: 58.1SponsoredUnderstanding wheel fitment measurements: Fiat MobiPCD and centre b
2016 Centre Bore: 58.1SponsoredUnderstanding wheel fitment measurements: Fiat MobiPCD and centre b
2016 Centre Bore: 58.1SponsoredUnderstanding wheel fitment measurements: Fiat MobiPCD and centre b
2016 Offset: centre-bore/","name":"Fiat Mobi Wheel Fitment, PCD, Offset & Centre Bore | Pure
2016 Offset: 44Rear Offset: 44Centre Bore: 58.1SponsoredUnderstanding wheel fitment measureme
2016 Offset: 44Rear Offset: 44Centre Bore: 58.1SponsoredUnderstanding wheel fitment measureme
2016 Offset: 44Rear Offset: 44Centre Bore: 58.1SponsoredUnderstanding wheel fitment measureme
2016 PCD: offset-centre-bore/","name":"Fiat Mobi Wheel Fitment, PCD, Offset & Centre Bore
2016 PCD: 4x98Front Offset: 44Rear Offset: 44Centre Bore: 58.1SponsoredUnderstanding wheel
2016 PCD: 4x98Front Offset: 44Rear Offset: 44Centre Bore: 58.1SponsoredUnderstanding wheel
2016 PCD: 4x98Front Offset: 44Rear Offset: 44Centre Bore: 58.1SponsoredUnderstanding wheel
2016 Centre bore: 58.1
2016 Front offset: 44
2016 PCD: 4x98
2016 Rear offset: 44
2016 Centre bore: 58.1
2016 Front offset: 44
2016 PCD: 4x98
2016 Rear offset: 44
2016 Centre bore: 58.1
2016 Front offset: 44
2016 PCD: 4x98
2016 Rear offset: 44
2017 Centre bore: 58.1
2017 Front offset: 44
2017 PCD: 4x98
2017 Rear offset: 44
2017 Centre bore: 58.1
2017 Front offset: 44
2017 PCD: 4x98
2017 Rear offset: 44
2017 Centre bore: 58.1
2017 Front offset: 44
2017 PCD: 4x98
2017 Rear offset: 44
2018 Centre bore: 58.1
2018 Front offset: 44
2018 PCD: 4x98
2018 Rear offset: 44
2018 Centre bore: 58.1
2018 Front offset: 44
2018 PCD: 4x98
2018 Rear offset: 44
2018 Centre bore: 58.1
2018 Front offset: 44
2018 PCD: 4x98
2018 Rear offset: 44
2019 Centre bore: 58.1
2019 Front offset: 44
2019 PCD: 4x98
2019 Rear offset: 44
2019 Centre bore: 58.1
2019 Front offset: 44
2019 PCD: 4x98
2019 Rear offset: 44