Fiat Marea

All makes › Fiat › Marea › 1998

Cold pressures. Final-tighten wheel nuts with a calibrated torque wrench, never an impact gun. Re-check after 25–50 miles.

Wheel nut torque · 1998

86 Nm

175/70R14, 185/65R14, 195/55R15, 195/60R15

4 bolts

5 bolts

6 bolts

Use the star / cross order that matches the wheel. Start fasteners by hand. Seat the wheel flush on the hub before final torque. Recheck after 25–50 miles. Confirm against the vehicle placard and handbook.

Pressures Torque Placard Location

Workshop checks

When to torque: every time a wheel is off — tyres, punctures, seasonal swap, brakes.

Seat first: the wheel must sit flush on the hub. Dirt or rust under the wheel means the wrench number is meaningless.

Match the seat: conical, ball/radius and flat/washer seats are not interchangeable. Thread size alone is not enough.

Recheck: after 25–50 miles check the same figure again. Do not add extra Nm.

Conicaltapered cone — angle must match the wheel

Ball / radiusrounded seat — common on some OEM alloys

Flat / washerflat clamp, often with a shank and washer

Pressures

Tyre	Normal F/R	Laden F/R	Eco F/R	Torque
175/70R14	30 PSI / 33 PSI	—	—	86 Nm
185/65R14	30 PSI / 33 PSI	—	—	86 Nm
195/55R15	34 PSI / 33 PSI	—	—	86 Nm
195/60R15	33 PSI / 33 PSI	—	—	86 Nm

Vehicle

Fitment specs

1996 Bolt Pattern: 4x98. Recorded centre bore (mm): 58.1.Wheel offset (ET)Recorded offset (ET mm):
1996 Bolt Pattern: 4x98. Recorded centre bore (mm): 58.1.Wheel offset (ET)Recorded offset (ET mm):
1996 Bolt Pattern: 4x98. Recorded centre bore (mm): 58.1.Wheel offset (ET)Recorded offset (ET mm):
1996 Bolt Pattern: 4x98. Recorded centre bore (mm): 58.1.Wheel offset (ET)Recorded offset (ET mm):
1996 Centre Bore: 58.1Sponsored(adsbygoogle=window.adsbygoogle||[]).push({});Understanding wheel f
1996 Centre Bore: 58.1SponsoredUnderstanding wheel fitment measurements: Fiat MareaPCD and centre
1996 Centre Bore: 58.1SponsoredUnderstanding wheel fitment measurements: Fiat MareaPCD and centre
1996 Centre Bore: 58.1SponsoredUnderstanding wheel fitment measurements: Fiat MareaPCD and centre
1996 Offset: centre-bore/","name":"Fiat Marea Wheel Fitment, PCD, Offset & Centre Bore | Pure
1996 Offset: 43Rear Offset: 43Centre Bore: 58.1SponsoredUnderstanding wheel fitment measureme
1996 Offset: 43Rear Offset: 43Centre Bore: 58.1SponsoredUnderstanding wheel fitment measureme
1996 Offset: 43Rear Offset: 43Centre Bore: 58.1SponsoredUnderstanding wheel fitment measureme
1996 PCD: offset-centre-bore/","name":"Fiat Marea Wheel Fitment, PCD, Offset & Centre Bore
1996 PCD: 4x98Front Offset: 43Rear Offset: 43Centre Bore: 58.1SponsoredUnderstanding wheel
1996 PCD: 4x98Front Offset: 43Rear Offset: 43Centre Bore: 58.1SponsoredUnderstanding wheel
1996 PCD: 4x98Front Offset: 43Rear Offset: 43Centre Bore: 58.1SponsoredUnderstanding wheel
1996 Centre bore: 58.1
1996 Front offset: 43
1996 PCD: 4x98
1996 Rear offset: 43
1996 Centre bore: 58.1
1996 Front offset: 43
1996 PCD: 4x98
1996 Rear offset: 43
1996 Centre bore: 58.1
1996 Front offset: 43
1996 PCD: 4x98
1996 Rear offset: 43
1996 Centre bore: 58.1
1996 Front offset: 43
1996 PCD: 4x98
1996 Rear offset: 43
1997 Centre bore: 58.1
1997 Front offset: 43
1997 PCD: 4x98
1997 Rear offset: 43
1997 Centre bore: 58.1
1997 Front offset: 43
1997 PCD: 4x98
1997 Rear offset: 43
1997 Centre bore: 58.1
1997 Front offset: 43
1997 PCD: 4x98
1997 Rear offset: 43
1997 Centre bore: 58.1
1997 Front offset: 43
1997 PCD: 4x98
1997 Rear offset: 43
1998 Centre bore: 58.1
1998 Front offset: 43
1998 PCD: 4x98
1998 Rear offset: 43
1998 Centre bore: 58.1
1998 Front offset: 43
1998 PCD: 4x98
1998 Rear offset: 43
1998 Centre bore: 58.1
1998 Front offset: 43
1998 PCD: 4x98
1998 Rear offset: 43