All makes › Fiat › Freemont › 2014
Cold pressures. Final-tighten wheel nuts with a calibrated torque wrench, never an impact gun. Re-check after 25–50 miles.
Wheel nut torque · 2014
215/70R16, 225/55R19, 225/60R16, 225/65R17, 245/45R20
Use the star / cross order that matches the wheel. Start fasteners by hand. Seat the wheel flush on the hub before final torque. Recheck after 25–50 miles. Confirm against the vehicle placard and handbook.
Workshop checks
When to torque: every time a wheel is off — tyres, punctures, seasonal swap, brakes.
Seat first: the wheel must sit flush on the hub. Dirt or rust under the wheel means the wrench number is meaningless.
Match the seat: conical, ball/radius and flat/washer seats are not interchangeable. Thread size alone is not enough.
Recheck: after 25–50 miles check the same figure again. Do not add extra Nm.
Pressures
| Tyre | Normal F/R | Laden F/R | Eco F/R | Torque |
|---|---|---|---|---|
| 215/70R16 | 32 PSI / 32 PSI | — | — | 135 Nm |
| 225/55R19 | 36 PSI / 36 PSI | — | — | 135 Nm |
| 225/60R16 | 36 PSI / 36 PSI | — | — | 135 Nm |
| 225/65R17 | 36 PSI / 36 PSI | — | — | 135 Nm |
| 245/45R20 | 36 PSI / 36 PSI | — | — | 135 Nm |
Vehicle
Fitment specs
2011 Bolt Pattern: 5x127. Recorded centre bore (mm): 71.6.Wheel offset (ET)Recorded offset (ET mm):
2011 Bolt Pattern: 5x127. Recorded centre bore (mm): 71.6.Wheel offset (ET)Recorded offset (ET mm):
2011 Bolt Pattern: 5x127. Recorded centre bore (mm): 71.6.Wheel offset (ET)Recorded offset (ET mm):
2011 Bolt Pattern: 5x127. Recorded centre bore (mm): 71.6.Wheel offset (ET)Recorded offset (ET mm):
2011 Centre Bore: 71.6Sponsored(adsbygoogle=window.adsbygoogle||[]).push({});Understanding wheel f
2011 Centre Bore: 71.6SponsoredUnderstanding wheel fitment measurements: Fiat FreemontPCD and cent
2011 Centre Bore: 71.6SponsoredUnderstanding wheel fitment measurements: Fiat FreemontPCD and cent
2011 Centre Bore: 71.6SponsoredUnderstanding wheel fitment measurements: Fiat FreemontPCD and cent
2011 Offset: centre-bore/","name":"Fiat Freemont Wheel Fitment, PCD, Offset & Centre Bore | P
2011 Offset: 40Rear Offset: 40Centre Bore: 71.6SponsoredUnderstanding wheel fitment measureme
2011 Offset: 40Rear Offset: 40Centre Bore: 71.6SponsoredUnderstanding wheel fitment measureme
2011 Offset: 40Rear Offset: 40Centre Bore: 71.6SponsoredUnderstanding wheel fitment measureme
2011 PCD: offset-centre-bore/","name":"Fiat Freemont Wheel Fitment, PCD, Offset & Centre B
2011 PCD: 5x127Front Offset: 40Rear Offset: 40Centre Bore: 71.6SponsoredUnderstanding whee
2011 PCD: 5x127Front Offset: 40Rear Offset: 40Centre Bore: 71.6SponsoredUnderstanding whee
2011 PCD: 5x127Front Offset: 40Rear Offset: 40Centre Bore: 71.6SponsoredUnderstanding whee
2011 Centre bore: 71.6
2011 Front offset: 40
2011 PCD: 5x127
2011 Rear offset: 40
2011 Centre bore: 71.6
2011 Front offset: 40
2011 PCD: 5x127
2011 Rear offset: 40
2011 Centre bore: 71.6
2011 Front offset: 40
2011 PCD: 5x127
2011 Rear offset: 40
2011 Centre bore: 71.6
2011 Front offset: 40
2011 PCD: 5x127
2011 Rear offset: 40
2011 Centre bore: 71.6
2011 Front offset: 40
2011 PCD: 5x127
2011 Rear offset: 40
2012 Centre bore: 71.6
2012 Front offset: 40
2012 PCD: 5x127
2012 Rear offset: 40
2012 Centre bore: 71.6
2012 Front offset: 40
2012 PCD: 5x127
2012 Rear offset: 40
2012 Centre bore: 71.6
2012 Front offset: 40
2012 PCD: 5x127
2012 Rear offset: 40
2012 Centre bore: 71.6
2012 Front offset: 40
2012 PCD: 5x127
2012 Rear offset: 40
2012 Centre bore: 71.6
2012 Front offset: 40
2012 PCD: 5x127
2012 Rear offset: 40
2013 Centre bore: 71.6
2013 Front offset: 40
2013 PCD: 5x127
2013 Rear offset: 40