Fiat Ducato Maxi

Workshop data. Confirm against the vehicle placard.

All makes › Fiat › Ducato Maxi › 2003

Cold pressures. Final-tighten wheel nuts with a calibrated torque wrench, never an impact gun. Re-check after 25–50 miles.

Wheel nut torque · 2003

180 Nm

205/75R16, 215/75R16

1 2 3 4
4 bolts
1 4 2 5 3
5 bolts
1 2 6 4 3 5
6 bolts

Use the star / cross order that matches the wheel. Start fasteners by hand. Seat the wheel flush on the hub before final torque. Recheck after 25–50 miles. Confirm against the vehicle placard and handbook.

Pressures Torque Placard Location

Workshop checks

When to torque: every time a wheel is off — tyres, punctures, seasonal swap, brakes.

Seat first: the wheel must sit flush on the hub. Dirt or rust under the wheel means the wrench number is meaningless.

Match the seat: conical, ball/radius and flat/washer seats are not interchangeable. Thread size alone is not enough.

Recheck: after 25–50 miles check the same figure again. Do not add extra Nm.

Conicaltapered cone — angle must match the wheel
Ball / radiusrounded seat — common on some OEM alloys
Flat / washerflat clamp, often with a shank and washer

Pressures

TyreNormal F/RLaden F/REco F/RTorque
205/75R16 64 PSI / 64 PSI — — 180 Nm
215/75R16 64 PSI / 64 PSI — — 180 Nm

Vehicle

Fiat Ducato Maxi
2003 Fiat Ducato Maxi

Fitment specs

1998 Bolt Pattern: 5x130. Recorded centre bore (mm): 78.1.Wheel offset (ET)Recorded offset (ET mm):
1998 Bolt Pattern: 5x130. Recorded centre bore (mm): 78.1.Wheel offset (ET)Recorded offset (ET mm):
1998 Bolt Pattern: 5x130. Recorded centre bore (mm): 78.1.Wheel offset (ET)Recorded offset (ET mm):
1998 Bolt Pattern: 5x130. Recorded centre bore (mm): 78.1.Wheel offset (ET)Recorded offset (ET mm):
1998 Centre Bore: 78.1Sponsored(adsbygoogle=window.adsbygoogle||[]).push({});Understanding wheel f
1998 Centre Bore: 78.1SponsoredUnderstanding wheel fitment measurements: Fiat Ducato MaxiPCD and c
1998 Centre Bore: 78.1SponsoredUnderstanding wheel fitment measurements: Fiat Ducato MaxiPCD and c
1998 Centre Bore: 78.1SponsoredUnderstanding wheel fitment measurements: Fiat Ducato MaxiPCD and c
1998 Offset: centre-bore/","name":"Fiat Ducato Maxi Wheel Fitment, PCD, Offset & Centre Bore
1998 Offset: 68Rear Offset: 68Centre Bore: 78.1SponsoredUnderstanding wheel fitment measureme
1998 Offset: 68Rear Offset: 68Centre Bore: 78.1SponsoredUnderstanding wheel fitment measureme
1998 Offset: 68Rear Offset: 68Centre Bore: 78.1SponsoredUnderstanding wheel fitment measureme
1998 PCD: offset-centre-bore/","name":"Fiat Ducato Maxi Wheel Fitment, PCD, Offset & Centr
1998 PCD: 5x130Front Offset: 68Rear Offset: 68Centre Bore: 78.1SponsoredUnderstanding whee
1998 PCD: 5x130Front Offset: 68Rear Offset: 68Centre Bore: 78.1SponsoredUnderstanding whee
1998 PCD: 5x130Front Offset: 68Rear Offset: 68Centre Bore: 78.1SponsoredUnderstanding whee
1998 Centre bore: 78.1
1998 Front offset: 68
1998 PCD: 5x130
1998 Rear offset: 68
1998 Centre bore: 78.1
1998 Front offset: 68
1998 PCD: 5x130
1998 Rear offset: 68
1999 Centre bore: 78.1
1999 Front offset: 68
1999 PCD: 5x130
1999 Rear offset: 68
1999 Centre bore: 78.1
1999 Front offset: 68
1999 PCD: 5x130
1999 Rear offset: 68
2000 Centre bore: 78.1
2000 Front offset: 68
2000 PCD: 5x130
2000 Rear offset: 68
2000 Centre bore: 78.1
2000 Front offset: 68
2000 PCD: 5x130
2000 Rear offset: 68
2001 Centre bore: 78.1
2001 Front offset: 68
2001 PCD: 5x130
2001 Rear offset: 68
2001 Centre bore: 78.1
2001 Front offset: 68
2001 PCD: 5x130
2001 Rear offset: 68
2002 Centre bore: 78.1
2002 Front offset: 68
2002 PCD: 5x130
2002 Rear offset: 68
2002 Centre bore: 78.1
2002 Front offset: 68
2002 PCD: 5x130
2002 Rear offset: 68
2003 Centre bore: 78.1
2003 Front offset: 68
2003 PCD: 5x130
2003 Rear offset: 68