Fiat Cinquecento

All makes › Fiat › Cinquecento › 1994

Cold pressures. Final-tighten wheel nuts with a calibrated torque wrench, never an impact gun. Re-check after 25–50 miles.

Wheel nut torque · 1994

86 Nm

135/80R13, 155/70R13, 165/65R13

4 bolts

5 bolts

6 bolts

Use the star / cross order that matches the wheel. Start fasteners by hand. Seat the wheel flush on the hub before final torque. Recheck after 25–50 miles. Confirm against the vehicle placard and handbook.

Pressures Torque Placard Location

Workshop checks

When to torque: every time a wheel is off — tyres, punctures, seasonal swap, brakes.

Seat first: the wheel must sit flush on the hub. Dirt or rust under the wheel means the wrench number is meaningless.

Match the seat: conical, ball/radius and flat/washer seats are not interchangeable. Thread size alone is not enough.

Recheck: after 25–50 miles check the same figure again. Do not add extra Nm.

Conicaltapered cone — angle must match the wheel

Ball / radiusrounded seat — common on some OEM alloys

Flat / washerflat clamp, often with a shank and washer

Pressures

Tyre	Normal F/R	Laden F/R	Eco F/R	Torque
135/80R13	30 PSI / 30 PSI	—	—	86 Nm
155/70R13	30 PSI / 30 PSI	—	—	86 Nm
165/65R13	30 PSI / 30 PSI	—	—	86 Nm

Vehicle

Fitment specs

1991 Bolt Pattern: 4x98. Recorded centre bore (mm): 58.1.Wheel offset (ET)Recorded offset (ET mm):
1991 Bolt Pattern: 4x98. Recorded centre bore (mm): 58.1.Wheel offset (ET)Recorded offset (ET mm):
1991 Bolt Pattern: 4x98. Recorded centre bore (mm): 58.1.Wheel offset (ET)Recorded offset (ET mm):
1991 Bolt Pattern: 4x98. Recorded centre bore (mm): 58.1.Wheel offset (ET)Recorded offset (ET mm):
1991 Centre Bore: 58.1Sponsored(adsbygoogle=window.adsbygoogle||[]).push({});Understanding wheel f
1991 Centre Bore: 58.1SponsoredUnderstanding wheel fitment measurements: Fiat CinquecentoPCD and c
1991 Centre Bore: 58.1SponsoredUnderstanding wheel fitment measurements: Fiat CinquecentoPCD and c
1991 Centre Bore: 58.1SponsoredUnderstanding wheel fitment measurements: Fiat CinquecentoPCD and c
1991 Offset: centre-bore/","name":"Fiat Cinquecento Wheel Fitment, PCD, Offset & Centre Bore
1991 Offset: 37Rear Offset: 37Centre Bore: 58.1SponsoredUnderstanding wheel fitment measureme
1991 Offset: 37Rear Offset: 37Centre Bore: 58.1SponsoredUnderstanding wheel fitment measureme
1991 Offset: 37Rear Offset: 37Centre Bore: 58.1SponsoredUnderstanding wheel fitment measureme
1991 PCD: offset-centre-bore/","name":"Fiat Cinquecento Wheel Fitment, PCD, Offset & Centr
1991 PCD: 4x98Front Offset: 37Rear Offset: 37Centre Bore: 58.1SponsoredUnderstanding wheel
1991 PCD: 4x98Front Offset: 37Rear Offset: 37Centre Bore: 58.1SponsoredUnderstanding wheel
1991 PCD: 4x98Front Offset: 37Rear Offset: 37Centre Bore: 58.1SponsoredUnderstanding wheel
1991 Centre bore: 58.1
1991 Front offset: 37
1991 PCD: 4x98
1991 Rear offset: 37
1991 Centre bore: 58.1
1991 Front offset: 37
1991 PCD: 4x98
1991 Rear offset: 37
1991 Centre bore: 58.1
1991 Front offset: 37
1991 PCD: 4x98
1991 Rear offset: 37
1992 Centre bore: 58.1
1992 Front offset: 37
1992 PCD: 4x98
1992 Rear offset: 37
1992 Centre bore: 58.1
1992 Front offset: 37
1992 PCD: 4x98
1992 Rear offset: 37
1992 Centre bore: 58.1
1992 Front offset: 37
1992 PCD: 4x98
1992 Rear offset: 37
1993 Centre bore: 58.1
1993 Front offset: 37
1993 PCD: 4x98
1993 Rear offset: 37
1993 Centre bore: 58.1
1993 Front offset: 37
1993 PCD: 4x98
1993 Rear offset: 37
1993 Centre bore: 58.1
1993 Front offset: 37
1993 PCD: 4x98
1993 Rear offset: 37
1994 Centre bore: 58.1
1994 Front offset: 37
1994 PCD: 4x98
1994 Rear offset: 37
1994 Centre bore: 58.1
1994 Front offset: 37
1994 PCD: 4x98
1994 Rear offset: 37