Fiat Bravo

All makes › Fiat › Bravo › 2007

Cold pressures. Final-tighten wheel nuts with a calibrated torque wrench, never an impact gun. Re-check after 25–50 miles.

Wheel nut torque · 2007

100 Nm

195/65R16, 205/55R16, 225/40R18, 225/45R17

4 bolts

5 bolts

6 bolts

Use the star / cross order that matches the wheel. Start fasteners by hand. Seat the wheel flush on the hub before final torque. Recheck after 25–50 miles. Confirm against the vehicle placard and handbook.

Pressures Torque Placard Location

Workshop checks

When to torque: every time a wheel is off — tyres, punctures, seasonal swap, brakes.

Seat first: the wheel must sit flush on the hub. Dirt or rust under the wheel means the wrench number is meaningless.

Match the seat: conical, ball/radius and flat/washer seats are not interchangeable. Thread size alone is not enough.

Recheck: after 25–50 miles check the same figure again. Do not add extra Nm.

Conicaltapered cone — angle must match the wheel

Ball / radiusrounded seat — common on some OEM alloys

Flat / washerflat clamp, often with a shank and washer

Pressures

Tyre	Normal F/R	Laden F/R	Eco F/R	Torque
195/65R16	33 PSI / 33 PSI	33 PSI / 33 PSI	—	100 Nm
205/55R16	33 PSI / 33 PSI	33 PSI / 33 PSI	—	100 Nm
225/40R18	37 PSI / 37 PSI	37 PSI / 37 PSI	—	100 Nm
225/45R17	33 PSI / 33 PSI	33 PSI / 33 PSI	—	100 Nm

Vehicle

Fitment specs

2007 Bolt Pattern: 4x98. Recorded centre bore (mm): 58.1.Wheel offset (ET)Recorded offset (ET mm):
2007 Bolt Pattern: 4x98. Recorded centre bore (mm): 58.1.Wheel offset (ET)Recorded offset (ET mm):
2007 Bolt Pattern: 4x98. Recorded centre bore (mm): 58.1.Wheel offset (ET)Recorded offset (ET mm):
2007 Bolt Pattern: 4x98. Recorded centre bore (mm): 58.1.Wheel offset (ET)Recorded offset (ET mm):
2007 Centre Bore: 58.1Sponsored(adsbygoogle=window.adsbygoogle||[]).push({});Understanding wheel f
2007 Centre Bore: 58.1SponsoredUnderstanding wheel fitment measurements: Fiat BravoPCD and centre
2007 Centre Bore: 58.1SponsoredUnderstanding wheel fitment measurements: Fiat BravoPCD and centre
2007 Centre Bore: 58.1SponsoredUnderstanding wheel fitment measurements: Fiat BravoPCD and centre
2007 Offset: centre-bore/","name":"Fiat Bravo Wheel Fitment, PCD, Offset & Centre Bore | Pure
2007 Offset: 37Rear Offset: 37Centre Bore: 58.1SponsoredUnderstanding wheel fitment measureme
2007 Offset: 37Rear Offset: 37Centre Bore: 58.1SponsoredUnderstanding wheel fitment measureme
2007 Offset: 37Rear Offset: 37Centre Bore: 58.1SponsoredUnderstanding wheel fitment measureme
2007 PCD: offset-centre-bore/","name":"Fiat Bravo Wheel Fitment, PCD, Offset & Centre Bore
2007 PCD: 4x98Front Offset: 37Rear Offset: 37Centre Bore: 58.1SponsoredUnderstanding wheel
2007 PCD: 4x98Front Offset: 37Rear Offset: 37Centre Bore: 58.1SponsoredUnderstanding wheel
2007 PCD: 4x98Front Offset: 37Rear Offset: 37Centre Bore: 58.1SponsoredUnderstanding wheel
2007 Centre bore: 58.1
2007 Front offset: 37
2007 PCD: 4x98
2007 Rear offset: 37
2007 Centre bore: 58.1
2007 Front offset: 37
2007 PCD: 4x98
2007 Rear offset: 37
2007 Centre bore: 58.1
2007 Front offset: 37
2007 PCD: 4x98
2007 Rear offset: 37
2007 Centre bore: 58.1
2007 Front offset: 37
2007 PCD: 4x98
2007 Rear offset: 37
2008 Centre bore: 58.1
2008 Front offset: 37
2008 PCD: 4x98
2008 Rear offset: 37
2008 Centre bore: 58.1
2008 Front offset: 37
2008 PCD: 4x98
2008 Rear offset: 37
2008 Centre bore: 58.1
2008 Front offset: 37
2008 PCD: 4x98
2008 Rear offset: 37
2008 Centre bore: 58.1
2008 Front offset: 37
2008 PCD: 4x98
2008 Rear offset: 37
2009 Centre bore: 58.1
2009 Front offset: 37
2009 PCD: 4x98
2009 Rear offset: 37
2009 Centre bore: 58.1
2009 Front offset: 37
2009 PCD: 4x98
2009 Rear offset: 37
2009 Centre bore: 58.1
2009 Front offset: 37
2009 PCD: 4x98
2009 Rear offset: 37