Fiat 500 / 595 Abarth

All makes › Fiat › 500 / 595 Abarth › 2015

Cold pressures. Final-tighten wheel nuts with a calibrated torque wrench, never an impact gun. Re-check after 25–50 miles.

Wheel nut torque · 2015

100 Nm

195/45R16, 205/40R17

4 bolts

5 bolts

6 bolts

Use the star / cross order that matches the wheel. Start fasteners by hand. Seat the wheel flush on the hub before final torque. Recheck after 25–50 miles. Confirm against the vehicle placard and handbook.

Pressures Torque Placard Location

Workshop checks

When to torque: every time a wheel is off — tyres, punctures, seasonal swap, brakes.

Seat first: the wheel must sit flush on the hub. Dirt or rust under the wheel means the wrench number is meaningless.

Match the seat: conical, ball/radius and flat/washer seats are not interchangeable. Thread size alone is not enough.

Recheck: after 25–50 miles check the same figure again. Do not add extra Nm.

Conicaltapered cone — angle must match the wheel

Ball / radiusrounded seat — common on some OEM alloys

Flat / washerflat clamp, often with a shank and washer

Pressures

Tyre	Normal F/R	Laden F/R	Eco F/R	Torque
195/45R16	32 PSI / 31 PSI	38 PSI / 35 PSI	—	100 Nm
205/40R17	32 PSI / 31 PSI	38 PSI / 35 PSI	—	100 Nm

Vehicle

Fitment specs

2007 Bolt Pattern: 4x98. Recorded centre bore (mm): 58.1.Wheel offset (ET)Recorded offset (ET mm):
2007 Bolt Pattern: 4x98. Recorded centre bore (mm): 58.1.Wheel offset (ET)Recorded offset (ET mm):
2007 Bolt Pattern: 4x98. Recorded centre bore (mm): 58.1.Wheel offset (ET)Recorded offset (ET mm):
2007 Bolt Pattern: 4x98. Recorded centre bore (mm): 58.1.Wheel offset (ET)Recorded offset (ET mm):
2007 Centre Bore: 58.1Sponsored(adsbygoogle=window.adsbygoogle||[]).push({});Understanding wheel f
2007 Centre Bore: 58.1SponsoredUnderstanding wheel fitment measurements: Fiat 500 / 595 AbarthPCD
2007 Centre Bore: 58.1SponsoredUnderstanding wheel fitment measurements: Fiat 500 / 595 AbarthPCD
2007 Centre Bore: 58.1SponsoredUnderstanding wheel fitment measurements: Fiat 500 / 595 AbarthPCD
2007 Offset: centre-bore/","name":"Fiat 500 / 595 Abarth Wheel Fitment, PCD, Offset & Centre
2007 Offset: 35Rear Offset: 35Centre Bore: 58.1SponsoredUnderstanding wheel fitment measureme
2007 Offset: 35Rear Offset: 35Centre Bore: 58.1SponsoredUnderstanding wheel fitment measureme
2007 Offset: 35Rear Offset: 35Centre Bore: 58.1SponsoredUnderstanding wheel fitment measureme
2007 PCD: offset-centre-bore/","name":"Fiat 500 / 595 Abarth Wheel Fitment, PCD, Offset &
2007 PCD: 4x98Front Offset: 35Rear Offset: 35Centre Bore: 58.1SponsoredUnderstanding wheel
2007 PCD: 4x98Front Offset: 35Rear Offset: 35Centre Bore: 58.1SponsoredUnderstanding wheel
2007 PCD: 4x98Front Offset: 35Rear Offset: 35Centre Bore: 58.1SponsoredUnderstanding wheel
2007 Centre bore: 58.1
2007 Front offset: 35
2007 PCD: 4x98
2007 Rear offset: 35
2007 Centre bore: 58.1
2007 Front offset: 35
2007 PCD: 4x98
2007 Rear offset: 35
2008 Centre bore: 58.1
2008 Front offset: 35
2008 PCD: 4x98
2008 Rear offset: 35
2008 Centre bore: 58.1
2008 Front offset: 35
2008 PCD: 4x98
2008 Rear offset: 35
2009 Centre bore: 58.1
2009 Front offset: 35
2009 PCD: 4x98
2009 Rear offset: 35
2009 Centre bore: 58.1
2009 Front offset: 35
2009 PCD: 4x98
2009 Rear offset: 35
2010 Centre bore: 58.1
2010 Front offset: 35
2010 PCD: 4x98
2010 Rear offset: 35
2010 Centre bore: 58.1
2010 Front offset: 35
2010 PCD: 4x98
2010 Rear offset: 35
2011 Centre bore: 58.1
2011 Front offset: 35
2011 PCD: 4x98
2011 Rear offset: 35
2011 Centre bore: 58.1
2011 Front offset: 35
2011 PCD: 4x98
2011 Rear offset: 35
2012 Centre bore: 58.1
2012 Front offset: 35
2012 PCD: 4x98