Fiat 500

All makes › Fiat › 500 › 2025

Cold pressures. Final-tighten wheel nuts with a calibrated torque wrench, never an impact gun. Re-check after 25–50 miles.

Wheel nut torque · 2025

100 Nm

165/65R14, 175/65R14, 195/45R16

4 bolts

5 bolts

6 bolts

Use the star / cross order that matches the wheel. Start fasteners by hand. Seat the wheel flush on the hub before final torque. Recheck after 25–50 miles. Confirm against the vehicle placard and handbook.

Pressures Torque Placard Location

Workshop checks

When to torque: every time a wheel is off — tyres, punctures, seasonal swap, brakes.

Seat first: the wheel must sit flush on the hub. Dirt or rust under the wheel means the wrench number is meaningless.

Match the seat: conical, ball/radius and flat/washer seats are not interchangeable. Thread size alone is not enough.

Recheck: after 25–50 miles check the same figure again. Do not add extra Nm.

Conicaltapered cone — angle must match the wheel

Ball / radiusrounded seat — common on some OEM alloys

Flat / washerflat clamp, often with a shank and washer

Pressures

Tyre	Normal F/R	Laden F/R	Eco F/R	Torque
165/65R14	30 PSI / 30 PSI	32 PSI / 32 PSI	—	100 Nm
175/65R14	33 PSI / 30 PSI	33 PSI / 32 PSI	—	100 Nm
195/45R16	32 PSI / 31 PSI	35 PSI / 33 PSI	—	100 Nm

Vehicle

Fitment specs

2007 Bolt Pattern: 4x98. Recorded centre bore (mm): 58.1.Wheel offset (ET)Recorded offset (ET mm):
2007 Bolt Pattern: 4x98. Recorded centre bore (mm): 58.1.Wheel offset (ET)Recorded offset (ET mm):
2007 Bolt Pattern: 4x98. Recorded centre bore (mm): 58.1.Wheel offset (ET)Recorded offset (ET mm):
2007 Bolt Pattern: 4x98. Recorded centre bore (mm): 58.1.Wheel offset (ET)Recorded offset (ET mm):
2007 Centre Bore: 58.107 - 26Tyre sizes175/65R14195/45R16165/65R14PCD: 4x98Front Offset: 35Rear Of
2007 Centre Bore: 58.107 - 26Tyre sizes175/65R14195/45R16165/65R14PCD: 4x98Front Offset: 35Rear Of
2007 Centre Bore: 58.107 - 26Tyre sizes175/65R14195/45R16165/65R14PCD: 4x98Front Offset: 35Rear Of
2007 Centre Bore: 58.107 - 26Tyre sizes175/65R14195/45R16165/65R14PCD: 4x98Front Offset: 35Rear Of
2007 Offset: centre-bore/","name":"Fiat 500 Wheel Fitment, PCD, Offset & Centre Bore | Pure T
2007 Offset: 35Rear Offset: 35Centre Bore: 58.107 - 26Tyre sizes175/65R14195/45R16165/65R14PC
2007 Offset: 35Rear Offset: 35Centre Bore: 58.107 - 26Tyre sizes175/65R14195/45R16165/65R14PC
2007 Offset: 35Rear Offset: 35Centre Bore: 58.107 - 26Tyre sizes175/65R14195/45R16165/65R14PC
2007 PCD: offset-centre-bore/","name":"Fiat 500 Wheel Fitment, PCD, Offset & Centre Bore |
2007 PCD: 4x98Front Offset: 35Rear Offset: 35Centre Bore: 58.107 - 26Tyre sizes175/65R1419
2007 PCD: 4x98Front Offset: 35Rear Offset: 35Centre Bore: 58.107 - 26Tyre sizes175/65R1419
2007 PCD: 4x98Front Offset: 35Rear Offset: 35Centre Bore: 58.107 - 26Tyre sizes175/65R1419
2007 Centre bore: 58.1
2007 Front offset: 35
2007 PCD: 4x98
2007 Rear offset: 35
2007 Centre bore: 58.1
2007 Front offset: 35
2007 PCD: 4x98
2007 Rear offset: 35
2007 Centre bore: 58.1
2007 Front offset: 35
2007 PCD: 4x98
2007 Rear offset: 35
2007 Centre bore: 58.1
2007 Front offset: 35
2007 PCD: 4x98
2007 Rear offset: 35
2008 Centre bore: 58.1
2008 Front offset: 35
2008 PCD: 4x98
2008 Rear offset: 35
2008 Centre bore: 58.1
2008 Front offset: 35
2008 PCD: 4x98
2008 Rear offset: 35
2008 Centre bore: 58.1
2008 Front offset: 35
2008 PCD: 4x98
2008 Rear offset: 35
2008 Centre bore: 58.1
2008 Front offset: 35
2008 PCD: 4x98
2008 Rear offset: 35
2009 Centre bore: 58.1
2009 Front offset: 35
2009 PCD: 4x98
2009 Rear offset: 35
2009 Centre bore: 58.1
2009 Front offset: 35
2009 PCD: 4x98
2009 Rear offset: 35
2009 Centre bore: 58.1
2009 Front offset: 35
2009 PCD: 4x98