Chrysler USA Town & Country

Workshop data. Confirm against the vehicle placard.

All makes › Chrysler USA › Town & Country › 2013

Cold pressures. Final-tighten wheel nuts with a calibrated torque wrench, never an impact gun. Re-check after 25–50 miles.

Wheel nut torque · 2013

135 Nm

215/65R16, 225/65R17

1 2 3 4
4 bolts
1 4 2 5 3
5 bolts
1 2 6 4 3 5
6 bolts

Use the star / cross order that matches the wheel. Start fasteners by hand. Seat the wheel flush on the hub before final torque. Recheck after 25–50 miles. Confirm against the vehicle placard and handbook.

Pressures Torque Placard Location

Workshop checks

When to torque: every time a wheel is off — tyres, punctures, seasonal swap, brakes.

Seat first: the wheel must sit flush on the hub. Dirt or rust under the wheel means the wrench number is meaningless.

Match the seat: conical, ball/radius and flat/washer seats are not interchangeable. Thread size alone is not enough.

Recheck: after 25–50 miles check the same figure again. Do not add extra Nm.

Conicaltapered cone — angle must match the wheel
Ball / radiusrounded seat — common on some OEM alloys
Flat / washerflat clamp, often with a shank and washer

Pressures

TyreNormal F/RLaden F/REco F/RTorque
215/65R16 36 PSI / 36 PSI — — 135 Nm
225/65R17 36 PSI / 36 PSI — — 135 Nm

Fitment specs

2008 Bolt Pattern: 5x127. Recorded centre bore (mm): 71.6.Wheel offset (ET)Recorded offset (ET mm):
2008 Bolt Pattern: 5x127. Recorded centre bore (mm): 71.6.Wheel offset (ET)Recorded offset (ET mm):
2008 Bolt Pattern: 5x127. Recorded centre bore (mm): 71.6.Wheel offset (ET)Recorded offset (ET mm):
2008 Bolt Pattern: 5x127. Recorded centre bore (mm): 71.6.Wheel offset (ET)Recorded offset (ET mm):
2008 Centre Bore: 71.6Sponsored(adsbygoogle=window.adsbygoogle||[]).push({});Understanding wheel f
2008 Centre Bore: 71.6SponsoredUnderstanding wheel fitment measurements: Chrysler USA Town & Count
2008 Centre Bore: 71.6SponsoredUnderstanding wheel fitment measurements: Chrysler USA Town & Count
2008 Centre Bore: 71.6SponsoredUnderstanding wheel fitment measurements: Chrysler USA Town & Count
2008 Offset: centre-bore/","name":"Chrysler USA Town & Country Wheel Fitment, PCD, Offset
2008 Offset: 40Rear Offset: 40Centre Bore: 71.6SponsoredUnderstanding wheel fitment measureme
2008 Offset: 40Rear Offset: 40Centre Bore: 71.6SponsoredUnderstanding wheel fitment measureme
2008 Offset: 40Rear Offset: 40Centre Bore: 71.6SponsoredUnderstanding wheel fitment measureme
2008 PCD: offset-centre-bore/","name":"Chrysler USA Town & Country Wheel Fitment, PCD,
2008 PCD: 5x127Front Offset: 40Rear Offset: 40Centre Bore: 71.6SponsoredUnderstanding whee
2008 PCD: 5x127Front Offset: 40Rear Offset: 40Centre Bore: 71.6SponsoredUnderstanding whee
2008 PCD: 5x127Front Offset: 40Rear Offset: 40Centre Bore: 71.6SponsoredUnderstanding whee
2008 Centre bore: 71.6
2008 Front offset: 40
2008 PCD: 5x127
2008 Rear offset: 40
2008 Centre bore: 71.6
2008 Front offset: 40
2008 PCD: 5x127
2008 Rear offset: 40
2009 Centre bore: 71.6
2009 Front offset: 40
2009 PCD: 5x127
2009 Rear offset: 40
2009 Centre bore: 71.6
2009 Front offset: 40
2009 PCD: 5x127
2009 Rear offset: 40
2010 Centre bore: 71.6
2010 Front offset: 40
2010 PCD: 5x127
2010 Rear offset: 40
2010 Centre bore: 71.6
2010 Front offset: 40
2010 PCD: 5x127
2010 Rear offset: 40
2011 Centre bore: 71.6
2011 Front offset: 40
2011 PCD: 5x127
2011 Rear offset: 40
2011 Centre bore: 71.6
2011 Front offset: 40
2011 PCD: 5x127
2011 Rear offset: 40
2012 Centre bore: 71.6
2012 Front offset: 40
2012 PCD: 5x127
2012 Rear offset: 40
2012 Centre bore: 71.6
2012 Front offset: 40
2012 PCD: 5x127
2012 Rear offset: 40
2013 Centre bore: 71.6
2013 Front offset: 40
2013 PCD: 5x127
2013 Rear offset: 40