Chrysler USA Sebring

All makes › Chrysler USA › Sebring › 2010

Cold pressures. Final-tighten wheel nuts with a calibrated torque wrench, never an impact gun. Re-check after 25–50 miles.

Wheel nut torque · 2010

135 Nm

215/55R18, 215/60R17, 215/65R16

4 bolts

5 bolts

6 bolts

Use the star / cross order that matches the wheel. Start fasteners by hand. Seat the wheel flush on the hub before final torque. Recheck after 25–50 miles. Confirm against the vehicle placard and handbook.

Pressures Torque Placard Location

Workshop checks

When to torque: every time a wheel is off — tyres, punctures, seasonal swap, brakes.

Seat first: the wheel must sit flush on the hub. Dirt or rust under the wheel means the wrench number is meaningless.

Match the seat: conical, ball/radius and flat/washer seats are not interchangeable. Thread size alone is not enough.

Recheck: after 25–50 miles check the same figure again. Do not add extra Nm.

Conicaltapered cone — angle must match the wheel

Ball / radiusrounded seat — common on some OEM alloys

Flat / washerflat clamp, often with a shank and washer

Pressures

Tyre	Normal F/R	Laden F/R	Eco F/R	Torque
215/55R18	32 PSI / 32 PSI	—	—	135 Nm
215/60R17	32 PSI / 32 PSI	—	—	135 Nm
215/65R16	32 PSI / 32 PSI	—	—	135 Nm

Fitment specs

2008 Bolt Pattern: 5x114.3. Recorded centre bore (mm): 67.1.Wheel offset (ET)Recorded offset (ET mm
2008 Bolt Pattern: 5x114.3. Recorded centre bore (mm): 67.1.Wheel offset (ET)Recorded offset (ET mm
2008 Bolt Pattern: 5x114.3. Recorded centre bore (mm): 67.1.Wheel offset (ET)Recorded offset (ET mm
2008 Bolt Pattern: 5x114.3. Recorded centre bore (mm): 67.1.Wheel offset (ET)Recorded offset (ET mm
2008 Centre Bore: 67.1Sponsored(adsbygoogle=window.adsbygoogle||[]).push({});Understanding wheel f
2008 Centre Bore: 67.1SponsoredUnderstanding wheel fitment measurements: Chrysler USA SebringPCD a
2008 Centre Bore: 67.1SponsoredUnderstanding wheel fitment measurements: Chrysler USA SebringPCD a
2008 Centre Bore: 67.1SponsoredUnderstanding wheel fitment measurements: Chrysler USA SebringPCD a
2008 Offset: centre-bore/","name":"Chrysler USA Sebring Wheel Fitment, PCD, Offset & Centre B
2008 Offset: 41Rear Offset: 41Centre Bore: 67.1SponsoredUnderstanding wheel fitment measureme
2008 Offset: 41Rear Offset: 41Centre Bore: 67.1SponsoredUnderstanding wheel fitment measureme
2008 Offset: 41Rear Offset: 41Centre Bore: 67.1SponsoredUnderstanding wheel fitment measureme
2008 PCD: offset-centre-bore/","name":"Chrysler USA Sebring Wheel Fitment, PCD, Offset & C
2008 PCD: 5x114.3Front Offset: 41Rear Offset: 41Centre Bore: 67.1SponsoredUnderstanding wh
2008 PCD: 5x114.3Front Offset: 41Rear Offset: 41Centre Bore: 67.1SponsoredUnderstanding wh
2008 PCD: 5x114.3Front Offset: 41Rear Offset: 41Centre Bore: 67.1SponsoredUnderstanding wh
2008 Centre bore: 67.1
2008 Front offset: 41
2008 PCD: 5x114.3
2008 Rear offset: 41
2008 Centre bore: 67.1
2008 Front offset: 41
2008 PCD: 5x114.3
2008 Rear offset: 41
2008 Centre bore: 67.1
2008 Front offset: 41
2008 PCD: 5x114.3
2008 Rear offset: 41
2009 Centre bore: 67.1
2009 Front offset: 41
2009 PCD: 5x114.3
2009 Rear offset: 41
2009 Centre bore: 67.1
2009 Front offset: 41
2009 PCD: 5x114.3
2009 Rear offset: 41
2009 Centre bore: 67.1
2009 Front offset: 41
2009 PCD: 5x114.3
2009 Rear offset: 41
2010 Centre bore: 67.1
2010 Front offset: 41
2010 PCD: 5x114.3
2010 Rear offset: 41
2010 Centre bore: 67.1
2010 Front offset: 41
2010 PCD: 5x114.3
2010 Rear offset: 41
2010 Centre bore: 67.1
2010 Front offset: 41
2010 PCD: 5x114.3
2010 Rear offset: 41
2011 Centre bore: 67.1
2011 Front offset: 41
2011 PCD: 5x114.3
2011 Rear offset: 41
2011 Centre bore: 67.1
2011 Front offset: 41
2011 PCD: 5x114.3
2011 Rear offset: 41