Chrysler USA Neon

All makes › Chrysler USA › Neon › 2006

Cold pressures. Final-tighten wheel nuts with a calibrated torque wrench, never an impact gun. Re-check after 25–50 miles.

Wheel nut torque · 2006

135 Nm

185/60R15, 185/65R14, 195/50R16, 205/50R17

4 bolts

5 bolts

6 bolts

Use the star / cross order that matches the wheel. Start fasteners by hand. Seat the wheel flush on the hub before final torque. Recheck after 25–50 miles. Confirm against the vehicle placard and handbook.

Pressures Torque Placard Location

Workshop checks

When to torque: every time a wheel is off — tyres, punctures, seasonal swap, brakes.

Seat first: the wheel must sit flush on the hub. Dirt or rust under the wheel means the wrench number is meaningless.

Match the seat: conical, ball/radius and flat/washer seats are not interchangeable. Thread size alone is not enough.

Recheck: after 25–50 miles check the same figure again. Do not add extra Nm.

Conicaltapered cone — angle must match the wheel

Ball / radiusrounded seat — common on some OEM alloys

Flat / washerflat clamp, often with a shank and washer

Pressures

Tyre	Normal F/R	Laden F/R	Eco F/R	Torque
185/60R15	32 PSI / 32 PSI	—	—	135 Nm
185/65R14	32 PSI / 32 PSI	—	—	135 Nm
195/50R16	32 PSI / 32 PSI	—	—	135 Nm
205/50R17	32 PSI / 32 PSI	—	—	135 Nm

Vehicle

Fitment specs

2000 Bolt Pattern: 5x100. Recorded centre bore (mm): 57.1.Wheel offset (ET)Recorded offset (ET mm):
2000 Bolt Pattern: 5x100. Recorded centre bore (mm): 57.1.Wheel offset (ET)Recorded offset (ET mm):
2000 Bolt Pattern: 5x100. Recorded centre bore (mm): 57.1.Wheel offset (ET)Recorded offset (ET mm):
2000 Bolt Pattern: 5x100. Recorded centre bore (mm): 57.1.Wheel offset (ET)Recorded offset (ET mm):
2000 Centre Bore: 57.1Sponsored(adsbygoogle=window.adsbygoogle||[]).push({});Understanding wheel f
2000 Centre Bore: 57.1SponsoredUnderstanding wheel fitment measurements: Chrysler USA NeonPCD and
2000 Centre Bore: 57.1SponsoredUnderstanding wheel fitment measurements: Chrysler USA NeonPCD and
2000 Centre Bore: 57.1SponsoredUnderstanding wheel fitment measurements: Chrysler USA NeonPCD and
2000 Offset: centre-bore/","name":"Chrysler USA Neon Wheel Fitment, PCD, Offset & Centre Bore
2000 Offset: 36Rear Offset: 36Centre Bore: 57.1SponsoredUnderstanding wheel fitment measureme
2000 Offset: 36Rear Offset: 36Centre Bore: 57.1SponsoredUnderstanding wheel fitment measureme
2000 Offset: 36Rear Offset: 36Centre Bore: 57.1SponsoredUnderstanding wheel fitment measureme
2000 PCD: offset-centre-bore/","name":"Chrysler USA Neon Wheel Fitment, PCD, Offset & Cent
2000 PCD: 5x100Front Offset: 36Rear Offset: 36Centre Bore: 57.1SponsoredUnderstanding whee
2000 PCD: 5x100Front Offset: 36Rear Offset: 36Centre Bore: 57.1SponsoredUnderstanding whee
2000 PCD: 5x100Front Offset: 36Rear Offset: 36Centre Bore: 57.1SponsoredUnderstanding whee
2000 Centre bore: 57.1
2000 Front offset: 36
2000 PCD: 5x100
2000 Rear offset: 36
2000 Centre bore: 57.1
2000 Front offset: 36
2000 PCD: 5x100
2000 Rear offset: 36
2000 Centre bore: 57.1
2000 Front offset: 36
2000 PCD: 5x100
2000 Rear offset: 36
2000 Centre bore: 57.1
2000 Front offset: 36
2000 PCD: 5x100
2000 Rear offset: 36
2001 Centre bore: 57.1
2001 Front offset: 36
2001 PCD: 5x100
2001 Rear offset: 36
2001 Centre bore: 57.1
2001 Front offset: 36
2001 PCD: 5x100
2001 Rear offset: 36
2001 Centre bore: 57.1
2001 Front offset: 36
2001 PCD: 5x100
2001 Rear offset: 36
2001 Centre bore: 57.1
2001 Front offset: 36
2001 PCD: 5x100
2001 Rear offset: 36
2002 Centre bore: 57.1
2002 Front offset: 36
2002 PCD: 5x100
2002 Rear offset: 36
2002 Centre bore: 57.1
2002 Front offset: 36
2002 PCD: 5x100
2002 Rear offset: 36
2002 Centre bore: 57.1
2002 Front offset: 36
2002 PCD: 5x100
2002 Rear offset: 36