Chrysler USA Laser

All makes › Chrysler USA › Laser › 1985

Cold pressures. Final-tighten wheel nuts with a calibrated torque wrench, never an impact gun. Re-check after 25–50 miles.

Wheel nut torque · 1985

135 Nm

185/70R14, 195/60R15, 205/60R15, 225/50R15

4 bolts

5 bolts

6 bolts

Use the star / cross order that matches the wheel. Start fasteners by hand. Seat the wheel flush on the hub before final torque. Recheck after 25–50 miles. Confirm against the vehicle placard and handbook.

Pressures Torque Placard Location

Workshop checks

When to torque: every time a wheel is off — tyres, punctures, seasonal swap, brakes.

Seat first: the wheel must sit flush on the hub. Dirt or rust under the wheel means the wrench number is meaningless.

Match the seat: conical, ball/radius and flat/washer seats are not interchangeable. Thread size alone is not enough.

Recheck: after 25–50 miles check the same figure again. Do not add extra Nm.

Conicaltapered cone — angle must match the wheel

Ball / radiusrounded seat — common on some OEM alloys

Flat / washerflat clamp, often with a shank and washer

Pressures

Tyre	Normal F/R	Laden F/R	Eco F/R	Torque
185/70R14	34 PSI / 34 PSI	—	—	135 Nm
195/60R15	34 PSI / 34 PSI	—	—	135 Nm
205/60R15	34 PSI / 34 PSI	—	—	135 Nm
225/50R15	34 PSI / 34 PSI	—	—	135 Nm

Fitment specs

1984 Bolt Pattern: 5x100. Recorded centre bore (mm): 57.1.Wheel offset (ET)Recorded offset (ET mm):
1984 Bolt Pattern: 5x100. Recorded centre bore (mm): 57.1.Wheel offset (ET)Recorded offset (ET mm):
1984 Bolt Pattern: 5x100. Recorded centre bore (mm): 57.1.Wheel offset (ET)Recorded offset (ET mm):
1984 Bolt Pattern: 5x100. Recorded centre bore (mm): 57.1.Wheel offset (ET)Recorded offset (ET mm):
1984 Centre Bore: 57.1Sponsored(adsbygoogle=window.adsbygoogle||[]).push({});Understanding wheel f
1984 Centre Bore: 57.1SponsoredUnderstanding wheel fitment measurements: Chrysler USA LaserPCD and
1984 Centre Bore: 57.1SponsoredUnderstanding wheel fitment measurements: Chrysler USA LaserPCD and
1984 Centre Bore: 57.1SponsoredUnderstanding wheel fitment measurements: Chrysler USA LaserPCD and
1984 Offset: centre-bore/","name":"Chrysler USA Laser Wheel Fitment, PCD, Offset & Centre Bor
1984 Offset: 36Rear Offset: 36Centre Bore: 57.1SponsoredUnderstanding wheel fitment measureme
1984 Offset: 36Rear Offset: 36Centre Bore: 57.1SponsoredUnderstanding wheel fitment measureme
1984 Offset: 36Rear Offset: 36Centre Bore: 57.1SponsoredUnderstanding wheel fitment measureme
1984 PCD: offset-centre-bore/","name":"Chrysler USA Laser Wheel Fitment, PCD, Offset & Cen
1984 PCD: 5x100Front Offset: 36Rear Offset: 36Centre Bore: 57.1SponsoredUnderstanding whee
1984 PCD: 5x100Front Offset: 36Rear Offset: 36Centre Bore: 57.1SponsoredUnderstanding whee
1984 PCD: 5x100Front Offset: 36Rear Offset: 36Centre Bore: 57.1SponsoredUnderstanding whee
1984 Centre bore: 57.1
1984 Front offset: 36
1984 PCD: 5x100
1984 Rear offset: 36
1984 Centre bore: 57.1
1984 Front offset: 36
1984 PCD: 5x100
1984 Rear offset: 36
1984 Centre bore: 57.1
1984 Front offset: 36
1984 PCD: 5x100
1984 Rear offset: 36
1984 Centre bore: 57.1
1984 Front offset: 36
1984 PCD: 5x100
1984 Rear offset: 36
1985 Centre bore: 57.1
1985 Front offset: 36
1985 PCD: 5x100
1985 Rear offset: 36
1985 Centre bore: 57.1
1985 Front offset: 36
1985 PCD: 5x100
1985 Rear offset: 36
1985 Centre bore: 57.1
1985 Front offset: 36
1985 PCD: 5x100
1985 Rear offset: 36
1985 Centre bore: 57.1
1985 Front offset: 36
1985 PCD: 5x100
1985 Rear offset: 36
1986 Centre bore: 57.1
1986 Front offset: 36
1986 PCD: 5x100
1986 Rear offset: 36
1986 Centre bore: 57.1
1986 Front offset: 36
1986 PCD: 5x100
1986 Rear offset: 36
1986 Centre bore: 57.1
1986 Front offset: 36
1986 PCD: 5x100
1986 Rear offset: 36