Chrysler USA Conquest

Workshop data. Confirm against the vehicle placard.

All makes › Chrysler USA › Conquest › 1989

Cold pressures. Final-tighten wheel nuts with a calibrated torque wrench, never an impact gun. Re-check after 25–50 miles.

Wheel nut torque · 1989

135 Nm

205/55R16, 215/60R15, 225/50R16, 245/45R16

1 2 3 4
4 bolts
1 4 2 5 3
5 bolts
1 2 6 4 3 5
6 bolts

Use the star / cross order that matches the wheel. Start fasteners by hand. Seat the wheel flush on the hub before final torque. Recheck after 25–50 miles. Confirm against the vehicle placard and handbook.

Pressures Torque Placard Location

Workshop checks

When to torque: every time a wheel is off — tyres, punctures, seasonal swap, brakes.

Seat first: the wheel must sit flush on the hub. Dirt or rust under the wheel means the wrench number is meaningless.

Match the seat: conical, ball/radius and flat/washer seats are not interchangeable. Thread size alone is not enough.

Recheck: after 25–50 miles check the same figure again. Do not add extra Nm.

Conicaltapered cone — angle must match the wheel
Ball / radiusrounded seat — common on some OEM alloys
Flat / washerflat clamp, often with a shank and washer

Pressures

TyreNormal F/RLaden F/REco F/RTorque
205/55R16 30 PSI / 30 PSI — — 135 Nm
215/60R15 30 PSI / 30 PSI — — 135 Nm
225/50R16 30 PSI / 30 PSI — — 135 Nm
245/45R16 33 PSI / 33 PSI — — 135 Nm

Vehicle

1989

Fitment specs

1987 Bolt Pattern: 5x114.3. Recorded centre bore (mm): 67.1.Wheel offset (ET)Recorded offset (ET mm
1987 Bolt Pattern: 5x114.3. Recorded centre bore (mm): 67.1.Wheel offset (ET)Recorded offset (ET mm
1987 Bolt Pattern: 5x114.3. Recorded centre bore (mm): 67.1.Wheel offset (ET)Recorded offset (ET mm
1987 Bolt Pattern: 5x114.3. Recorded centre bore (mm): 67.1.Wheel offset (ET)Recorded offset (ET mm
1987 Centre Bore: 67.187 - 89Tyre sizes215/60R15205/55R16PCD: 5x114.3Front Offset: 36Rear Offset:
1987 Centre Bore: 67.187 - 89Tyre sizes215/60R15205/55R16PCD: 5x114.3Front Offset: 36Rear Offset:
1987 Centre Bore: 67.187 - 89Tyre sizes215/60R15205/55R16PCD: 5x114.3Front Offset: 36Rear Offset:
1987 Centre Bore: 67.187 - 89Tyre sizes215/60R15205/55R16PCD: 5x114.3Front Offset: 36Rear Offset:
1987 Offset: centre-bore/","name":"Chrysler USA Conquest Wheel Fitment, PCD, Offset & Centre
1987 Offset: 30Rear Offset: 30Centre Bore: 67.187 - 89Tyre sizes215/60R15205/55R16PCD: 5x114.
1987 Offset: 30Rear Offset: 30Centre Bore: 67.187 - 89Tyre sizes215/60R15205/55R16PCD: 5x114.
1987 Offset: 30Rear Offset: 30Centre Bore: 67.187 - 89Tyre sizes215/60R15205/55R16PCD: 5x114.
1987 PCD: offset-centre-bore/","name":"Chrysler USA Conquest Wheel Fitment, PCD, Offset &
1987 PCD: 5x114.3Front Offset: 30Rear Offset: 30Centre Bore: 67.187 - 89Tyre sizes215/60R1
1987 PCD: 5x114.3Front Offset: 30Rear Offset: 30Centre Bore: 67.187 - 89Tyre sizes215/60R1
1987 PCD: 5x114.3Front Offset: 30Rear Offset: 30Centre Bore: 67.187 - 89Tyre sizes215/60R1
1987 Centre bore: 67.1
1987 Front offset: 36
1987 PCD: 5x114.3
1987 Rear offset: 36
1987 Centre bore: 67.1
1987 Front offset: 36
1987 PCD: 5x114.3
1987 Rear offset: 36
1987 Centre bore: 67.1
1987 Front offset: 30
1987 PCD: 5x114.3
1987 Rear offset: 30
1987 Centre bore: 67.1
1987 Front offset: 33
1987 PCD: 5x114.3
1987 Rear offset: 33
1988 Centre bore: 67.1
1988 Front offset: 36
1988 PCD: 5x114.3
1988 Rear offset: 36
1988 Centre bore: 67.1
1988 Front offset: 36
1988 PCD: 5x114.3
1988 Rear offset: 36
1988 Centre bore: 67.1
1988 Front offset: 30
1988 PCD: 5x114.3
1988 Rear offset: 30
1988 Centre bore: 67.1
1988 Front offset: 33
1988 PCD: 5x114.3
1988 Rear offset: 33
1989 Centre bore: 67.1
1989 Front offset: 36
1989 PCD: 5x114.3
1989 Rear offset: 36
1989 Centre bore: 67.1
1989 Front offset: 36
1989 PCD: 5x114.3
1989 Rear offset: 36
1989 Centre bore: 67.1
1989 Front offset: 30
1989 PCD: 5x114.3
1989 Rear offset: 30