Chrysler USA Concorde

All makes › Chrysler USA › Concorde › 1995

Cold pressures. Final-tighten wheel nuts with a calibrated torque wrench, never an impact gun. Re-check after 25–50 miles.

Wheel nut torque · 1995

135 Nm

205/70R15, 225/55R17, 225/60R16

4 bolts

5 bolts

6 bolts

Use the star / cross order that matches the wheel. Start fasteners by hand. Seat the wheel flush on the hub before final torque. Recheck after 25–50 miles. Confirm against the vehicle placard and handbook.

Pressures Torque Placard Location

Workshop checks

When to torque: every time a wheel is off — tyres, punctures, seasonal swap, brakes.

Seat first: the wheel must sit flush on the hub. Dirt or rust under the wheel means the wrench number is meaningless.

Match the seat: conical, ball/radius and flat/washer seats are not interchangeable. Thread size alone is not enough.

Recheck: after 25–50 miles check the same figure again. Do not add extra Nm.

Conicaltapered cone — angle must match the wheel

Ball / radiusrounded seat — common on some OEM alloys

Flat / washerflat clamp, often with a shank and washer

Pressures

Tyre	Normal F/R	Laden F/R	Eco F/R	Torque
205/70R15	34 PSI / 34 PSI	—	—	135 Nm
225/55R17	34 PSI / 34 PSI	—	—	135 Nm
225/60R16	34 PSI / 34 PSI	—	—	135 Nm

Fitment specs

1993 Bolt Pattern: 5x114.3. Recorded centre bore (mm): 71.6.Wheel offset (ET)Recorded offset (ET mm
1993 Bolt Pattern: 5x114.3. Recorded centre bore (mm): 71.6.Wheel offset (ET)Recorded offset (ET mm
1993 Bolt Pattern: 5x114.3. Recorded centre bore (mm): 71.6.Wheel offset (ET)Recorded offset (ET mm
1993 Bolt Pattern: 5x114.3. Recorded centre bore (mm): 71.6.Wheel offset (ET)Recorded offset (ET mm
1993 Centre Bore: 71.6Sponsored(adsbygoogle=window.adsbygoogle||[]).push({});Understanding wheel f
1993 Centre Bore: 71.6SponsoredUnderstanding wheel fitment measurements: Chrysler USA ConcordePCD
1993 Centre Bore: 71.6SponsoredUnderstanding wheel fitment measurements: Chrysler USA ConcordePCD
1993 Centre Bore: 71.6SponsoredUnderstanding wheel fitment measurements: Chrysler USA ConcordePCD
1993 Offset: centre-bore/","name":"Chrysler USA Concorde Wheel Fitment, PCD, Offset & Centre
1993 Offset: 42Rear Offset: 42Centre Bore: 71.6SponsoredUnderstanding wheel fitment measureme
1993 Offset: 42Rear Offset: 42Centre Bore: 71.6SponsoredUnderstanding wheel fitment measureme
1993 Offset: 42Rear Offset: 42Centre Bore: 71.6SponsoredUnderstanding wheel fitment measureme
1993 PCD: offset-centre-bore/","name":"Chrysler USA Concorde Wheel Fitment, PCD, Offset &
1993 PCD: 5x114.3Front Offset: 42Rear Offset: 42Centre Bore: 71.6SponsoredUnderstanding wh
1993 PCD: 5x114.3Front Offset: 42Rear Offset: 42Centre Bore: 71.6SponsoredUnderstanding wh
1993 PCD: 5x114.3Front Offset: 42Rear Offset: 42Centre Bore: 71.6SponsoredUnderstanding wh
1993 Centre bore: 71.6
1993 Front offset: 42
1993 PCD: 5x114.3
1993 Rear offset: 42
1993 Centre bore: 71.6
1993 Front offset: 42
1993 PCD: 5x114.3
1993 Rear offset: 42
1993 Centre bore: 71.6
1993 Front offset: 42
1993 PCD: 5x114.3
1993 Rear offset: 42
1994 Centre bore: 71.6
1994 Front offset: 42
1994 PCD: 5x114.3
1994 Rear offset: 42
1994 Centre bore: 71.6
1994 Front offset: 42
1994 PCD: 5x114.3
1994 Rear offset: 42
1994 Centre bore: 71.6
1994 Front offset: 42
1994 PCD: 5x114.3
1994 Rear offset: 42
1995 Centre bore: 71.6
1995 Front offset: 42
1995 PCD: 5x114.3
1995 Rear offset: 42
1995 Centre bore: 71.6
1995 Front offset: 42
1995 PCD: 5x114.3
1995 Rear offset: 42
1995 Centre bore: 71.6
1995 Front offset: 42
1995 PCD: 5x114.3
1995 Rear offset: 42
1996 Centre bore: 71.6
1996 Front offset: 42
1996 PCD: 5x114.3
1996 Rear offset: 42
1996 Centre bore: 71.6
1996 Front offset: 42
1996 PCD: 5x114.3
1996 Rear offset: 42