Chrysler USA Cirrus

Workshop data. Confirm against the vehicle placard.

All makes › Chrysler USA › Cirrus › 1997

Cold pressures. Final-tighten wheel nuts with a calibrated torque wrench, never an impact gun. Re-check after 25–50 miles.

Wheel nut torque · 1997

135 Nm

195/65R15, 215/55R16

1 2 3 4
4 bolts
1 4 2 5 3
5 bolts
1 2 6 4 3 5
6 bolts

Use the star / cross order that matches the wheel. Start fasteners by hand. Seat the wheel flush on the hub before final torque. Recheck after 25–50 miles. Confirm against the vehicle placard and handbook.

Pressures Torque Placard Location

Workshop checks

When to torque: every time a wheel is off — tyres, punctures, seasonal swap, brakes.

Seat first: the wheel must sit flush on the hub. Dirt or rust under the wheel means the wrench number is meaningless.

Match the seat: conical, ball/radius and flat/washer seats are not interchangeable. Thread size alone is not enough.

Recheck: after 25–50 miles check the same figure again. Do not add extra Nm.

Conicaltapered cone — angle must match the wheel
Ball / radiusrounded seat — common on some OEM alloys
Flat / washerflat clamp, often with a shank and washer

Pressures

TyreNormal F/RLaden F/REco F/RTorque
195/65R15 30 PSI / 30 PSI — — 135 Nm
215/55R16 32 PSI / 32 PSI — — 135 Nm

Fitment specs

1994 Bolt Pattern: 5x100. Recorded centre bore (mm): 57.1.Wheel offset (ET)Recorded offset (ET mm):
1994 Bolt Pattern: 5x100. Recorded centre bore (mm): 57.1.Wheel offset (ET)Recorded offset (ET mm):
1994 Bolt Pattern: 5x100. Recorded centre bore (mm): 57.1.Wheel offset (ET)Recorded offset (ET mm):
1994 Bolt Pattern: 5x100. Recorded centre bore (mm): 57.1.Wheel offset (ET)Recorded offset (ET mm):
1994 Centre Bore: 57.1Sponsored(adsbygoogle=window.adsbygoogle||[]).push({});Understanding wheel f
1994 Centre Bore: 57.1SponsoredUnderstanding wheel fitment measurements: Chrysler USA CirrusPCD an
1994 Centre Bore: 57.1SponsoredUnderstanding wheel fitment measurements: Chrysler USA CirrusPCD an
1994 Centre Bore: 57.1SponsoredUnderstanding wheel fitment measurements: Chrysler USA CirrusPCD an
1994 Offset: centre-bore/","name":"Chrysler USA Cirrus Wheel Fitment, PCD, Offset & Centre Bo
1994 Offset: 50Rear Offset: 50Centre Bore: 57.1SponsoredUnderstanding wheel fitment measureme
1994 Offset: 50Rear Offset: 50Centre Bore: 57.1SponsoredUnderstanding wheel fitment measureme
1994 Offset: 50Rear Offset: 50Centre Bore: 57.1SponsoredUnderstanding wheel fitment measureme
1994 PCD: offset-centre-bore/","name":"Chrysler USA Cirrus Wheel Fitment, PCD, Offset & Ce
1994 PCD: 5x100Front Offset: 50Rear Offset: 50Centre Bore: 57.1SponsoredUnderstanding whee
1994 PCD: 5x100Front Offset: 50Rear Offset: 50Centre Bore: 57.1SponsoredUnderstanding whee
1994 PCD: 5x100Front Offset: 50Rear Offset: 50Centre Bore: 57.1SponsoredUnderstanding whee
1994 Centre bore: 57.1
1994 Front offset: 50
1994 PCD: 5x100
1994 Rear offset: 50
1994 Centre bore: 57.1
1994 Front offset: 50
1994 PCD: 5x100
1994 Rear offset: 50
1995 Centre bore: 57.1
1995 Front offset: 50
1995 PCD: 5x100
1995 Rear offset: 50
1995 Centre bore: 57.1
1995 Front offset: 50
1995 PCD: 5x100
1995 Rear offset: 50
1996 Centre bore: 57.1
1996 Front offset: 50
1996 PCD: 5x100
1996 Rear offset: 50
1996 Centre bore: 57.1
1996 Front offset: 50
1996 PCD: 5x100
1996 Rear offset: 50
1997 Centre bore: 57.1
1997 Front offset: 50
1997 PCD: 5x100
1997 Rear offset: 50
1997 Centre bore: 57.1
1997 Front offset: 50
1997 PCD: 5x100
1997 Rear offset: 50
1998 Centre bore: 57.1
1998 Front offset: 50
1998 PCD: 5x100
1998 Rear offset: 50
1998 Centre bore: 57.1
1998 Front offset: 50
1998 PCD: 5x100
1998 Rear offset: 50
1999 Centre bore: 57.1
1999 Front offset: 50
1999 PCD: 5x100
1999 Rear offset: 50