Chrysler USA 300

Workshop data. Confirm against the vehicle placard.

All makes › Chrysler USA › 300 › 2012

Cold pressures. Final-tighten wheel nuts with a calibrated torque wrench, never an impact gun. Re-check after 25–50 miles.

Wheel nut torque · 2012

176 Nm

225/60R18, 235/55R19, 245/45R20

1 2 3 4
4 bolts
1 4 2 5 3
5 bolts
1 2 6 4 3 5
6 bolts

Use the star / cross order that matches the wheel. Start fasteners by hand. Seat the wheel flush on the hub before final torque. Recheck after 25–50 miles. Confirm against the vehicle placard and handbook.

Pressures Torque Placard Location

Workshop checks

When to torque: every time a wheel is off — tyres, punctures, seasonal swap, brakes.

Seat first: the wheel must sit flush on the hub. Dirt or rust under the wheel means the wrench number is meaningless.

Match the seat: conical, ball/radius and flat/washer seats are not interchangeable. Thread size alone is not enough.

Recheck: after 25–50 miles check the same figure again. Do not add extra Nm.

Conicaltapered cone — angle must match the wheel
Ball / radiusrounded seat — common on some OEM alloys
Flat / washerflat clamp, often with a shank and washer

Pressures

TyreNormal F/RLaden F/REco F/RTorque
225/60R18 33 PSI / 33 PSI — — 176 Nm
235/55R19 33 PSI / 33 PSI — — 176 Nm
245/45R20 36 PSI / 36 PSI — — 176 Nm

Fitment specs

2012 Bolt Pattern: 5x115. Recorded centre bore (mm): 71.6.Wheel offset (ET)Recorded offset (ET mm)
2012 Bolt Pattern: 5x115. Recorded centre bore (mm): 71.6.Wheel offset (ET)Recorded offset (ET mm)
2012 Bolt Pattern: 5x115. Recorded centre bore (mm): 71.6.Wheel offset (ET)Recorded offset (ET mm)
2012 Bolt Pattern: 5x115. Recorded centre bore (mm): 71.6.Wheel offset (ET)Recorded offset (ET mm)
2012 Centre Bore: 71.612 - 17Tyre sizes245/45R20PCD: 5x115Front Offset: 24Rear Offset: 24Centre Bo
2012 Centre Bore: 71.612 - 17Tyre sizes245/45R20PCD: 5x115Front Offset: 24Rear Offset: 24Centre Bo
2012 Centre Bore: 71.612 - 17Tyre sizes245/45R20PCD: 5x115Front Offset: 24Rear Offset: 24Centre Bo
2012 Centre Bore: 71.612 - 17Tyre sizes245/45R20PCD: 5x115Front Offset: 24Rear Offset: 24Centre Bo
2012 Offset: centre-bore/","name":"Chrysler USA 300 Wheel Fitment, PCD, Offset & Centre Bore
2012 Offset: 43Rear Offset: 43Centre Bore: 71.612 - 17Tyre sizes245/45R20PCD: 5x115Front Offs
2012 Offset: 43Rear Offset: 43Centre Bore: 71.612 - 17Tyre sizes245/45R20PCD: 5x115Front Offs
2012 Offset: 43Rear Offset: 43Centre Bore: 71.612 - 17Tyre sizes245/45R20PCD: 5x115Front Offs
2012 PCD: offset-centre-bore/","name":"Chrysler USA 300 Wheel Fitment, PCD, Offset & Centr
2012 PCD: 5x115Front Offset: 43Rear Offset: 43Centre Bore: 71.612 - 17Tyre sizes245/45R20P
2012 PCD: 5x115Front Offset: 43Rear Offset: 43Centre Bore: 71.612 - 17Tyre sizes245/45R20P
2012 PCD: 5x115Front Offset: 43Rear Offset: 43Centre Bore: 71.612 - 17Tyre sizes245/45R20P
2012 Centre bore: 71.6
2012 Front offset: 43
2012 PCD: 5x115
2012 Rear offset: 43
2012 Centre bore: 71.6
2012 Front offset: 43
2012 PCD: 5x115
2012 Rear offset: 43
2012 Centre bore: 71.6
2012 Front offset: 24
2012 PCD: 5x115
2012 Rear offset: 24
2013 Centre bore: 71.6
2013 Front offset: 43
2013 PCD: 5x115
2013 Rear offset: 43
2013 Centre bore: 71.6
2013 Front offset: 43
2013 PCD: 5x115
2013 Rear offset: 43
2013 Centre bore: 71.6
2013 Front offset: 24
2013 PCD: 5x115
2013 Rear offset: 24
2014 Centre bore: 71.6
2014 Front offset: 43
2014 PCD: 5x115
2014 Rear offset: 43
2014 Centre bore: 71.6
2014 Front offset: 43
2014 PCD: 5x115
2014 Rear offset: 43
2014 Centre bore: 71.6
2014 Front offset: 24
2014 PCD: 5x115
2014 Rear offset: 24
2015 Centre bore: 71.6
2015 Front offset: 43
2015 PCD: 5x115
2015 Rear offset: 43
2015 Centre bore: 71.6
2015 Front offset: 43
2015 PCD: 5x115
2015 Rear offset: 43