Chrysler USA 200

Workshop data. Confirm against the vehicle placard.

All makes › Chrysler USA › 200 › 2011

Cold pressures. Final-tighten wheel nuts with a calibrated torque wrench, never an impact gun. Re-check after 25–50 miles.

Wheel nut torque · 2011

135 Nm

225/50R18, 225/55R17, 235/45R19

1 2 3 4
4 bolts
1 4 2 5 3
5 bolts
1 2 6 4 3 5
6 bolts

Use the star / cross order that matches the wheel. Start fasteners by hand. Seat the wheel flush on the hub before final torque. Recheck after 25–50 miles. Confirm against the vehicle placard and handbook.

Pressures Torque Placard Location

Workshop checks

When to torque: every time a wheel is off — tyres, punctures, seasonal swap, brakes.

Seat first: the wheel must sit flush on the hub. Dirt or rust under the wheel means the wrench number is meaningless.

Match the seat: conical, ball/radius and flat/washer seats are not interchangeable. Thread size alone is not enough.

Recheck: after 25–50 miles check the same figure again. Do not add extra Nm.

Conicaltapered cone — angle must match the wheel
Ball / radiusrounded seat — common on some OEM alloys
Flat / washerflat clamp, often with a shank and washer

Pressures

TyreNormal F/RLaden F/REco F/RTorque
225/50R18 32 PSI / 32 PSI — — 135 Nm
225/55R17 32 PSI / 32 PSI — — 135 Nm
235/45R19 33 PSI / 33 PSI — — 135 Nm

Fitment specs

2011 Bolt Pattern: 5x114.3. Recorded centre bore (mm): 67.1.Wheel offset (ET)Recorded offset (ET mm
2011 Bolt Pattern: 5x114.3. Recorded centre bore (mm): 67.1.Wheel offset (ET)Recorded offset (ET mm
2011 Bolt Pattern: 5x114.3. Recorded centre bore (mm): 67.1.Wheel offset (ET)Recorded offset (ET mm
2011 Bolt Pattern: 5x114.3. Recorded centre bore (mm): 67.1.Wheel offset (ET)Recorded offset (ET mm
2011 Centre Bore: 67.111 - 17Tyre sizes225/50R18235/45R19PCD: 5x114.3Front Offset: 45Rear Offset:
2011 Centre Bore: 67.111 - 17Tyre sizes225/50R18235/45R19PCD: 5x114.3Front Offset: 45Rear Offset:
2011 Centre Bore: 67.111 - 17Tyre sizes225/50R18235/45R19PCD: 5x114.3Front Offset: 45Rear Offset:
2011 Centre Bore: 67.111 - 17Tyre sizes225/50R18235/45R19PCD: 5x114.3Front Offset: 45Rear Offset:
2011 Offset: centre-bore/","name":"Chrysler USA 200 Wheel Fitment, PCD, Offset & Centre Bore
2011 Offset: 41Rear Offset: 41Centre Bore: 67.111 - 17Tyre sizes225/50R18235/45R19PCD: 5x114.
2011 Offset: 41Rear Offset: 41Centre Bore: 67.111 - 17Tyre sizes225/50R18235/45R19PCD: 5x114.
2011 Offset: 41Rear Offset: 41Centre Bore: 67.111 - 17Tyre sizes225/50R18235/45R19PCD: 5x114.
2011 PCD: offset-centre-bore/","name":"Chrysler USA 200 Wheel Fitment, PCD, Offset & Centr
2011 PCD: 5x114.3Front Offset: 41Rear Offset: 41Centre Bore: 67.111 - 17Tyre sizes225/50R1
2011 PCD: 5x114.3Front Offset: 41Rear Offset: 41Centre Bore: 67.111 - 17Tyre sizes225/50R1
2011 PCD: 5x114.3Front Offset: 41Rear Offset: 41Centre Bore: 67.111 - 17Tyre sizes225/50R1
2011 Centre bore: 67.1
2011 Front offset: 45
2011 PCD: 5x114.3
2011 Rear offset: 45
2011 Centre bore: 67.1
2011 Front offset: 41
2011 PCD: 5x114.3
2011 Rear offset: 41
2011 Centre bore: 67.1
2011 Front offset: 45
2011 PCD: 5x114.3
2011 Rear offset: 45
2012 Centre bore: 67.1
2012 Front offset: 45
2012 PCD: 5x114.3
2012 Rear offset: 45
2012 Centre bore: 67.1
2012 Front offset: 41
2012 PCD: 5x114.3
2012 Rear offset: 41
2012 Centre bore: 67.1
2012 Front offset: 45
2012 PCD: 5x114.3
2012 Rear offset: 45
2013 Centre bore: 67.1
2013 Front offset: 45
2013 PCD: 5x114.3
2013 Rear offset: 45
2013 Centre bore: 67.1
2013 Front offset: 41
2013 PCD: 5x114.3
2013 Rear offset: 41
2013 Centre bore: 67.1
2013 Front offset: 45
2013 PCD: 5x114.3
2013 Rear offset: 45
2014 Centre bore: 67.1
2014 Front offset: 45
2014 PCD: 5x114.3
2014 Rear offset: 45
2014 Centre bore: 67.1
2014 Front offset: 41
2014 PCD: 5x114.3
2014 Rear offset: 41