Chevrolet USA HHR

All makes › Chevrolet USA › HHR › 2009

Cold pressures. Final-tighten wheel nuts with a calibrated torque wrench, never an impact gun. Re-check after 25–50 miles.

Wheel nut torque · 2009

120 Nm

215/50R17, 215/55R16, 225/45R18

4 bolts

5 bolts

6 bolts

Use the star / cross order that matches the wheel. Start fasteners by hand. Seat the wheel flush on the hub before final torque. Recheck after 25–50 miles. Confirm against the vehicle placard and handbook.

Pressures Torque Placard Location

Workshop checks

When to torque: every time a wheel is off — tyres, punctures, seasonal swap, brakes.

Seat first: the wheel must sit flush on the hub. Dirt or rust under the wheel means the wrench number is meaningless.

Match the seat: conical, ball/radius and flat/washer seats are not interchangeable. Thread size alone is not enough.

Recheck: after 25–50 miles check the same figure again. Do not add extra Nm.

Conicaltapered cone — angle must match the wheel

Ball / radiusrounded seat — common on some OEM alloys

Flat / washerflat clamp, often with a shank and washer

Pressures

Tyre	Normal F/R	Laden F/R	Eco F/R	Torque
215/50R17	32 PSI / 34 PSI	—	—	120 Nm
215/55R16	34 PSI / 34 PSI	—	—	120 Nm
225/45R18	32 PSI / 34 PSI	—	—	120 Nm

Fitment specs

2006 Bolt Pattern: 5X110. Recorded centre bore (mm): 65.1.Wheel offset (ET)Recorded offset (ET mm):
2006 Bolt Pattern: 5X110. Recorded centre bore (mm): 65.1.Wheel offset (ET)Recorded offset (ET mm):
2006 Bolt Pattern: 5X110. Recorded centre bore (mm): 65.1.Wheel offset (ET)Recorded offset (ET mm):
2006 Bolt Pattern: 5X110. Recorded centre bore (mm): 65.1.Wheel offset (ET)Recorded offset (ET mm):
2006 Centre Bore: 65.1Sponsored(adsbygoogle=window.adsbygoogle||[]).push({});Understanding wheel f
2006 Centre Bore: 65.1SponsoredUnderstanding wheel fitment measurements: Chevrolet USA HHRPCD and
2006 Centre Bore: 65.1SponsoredUnderstanding wheel fitment measurements: Chevrolet USA HHRPCD and
2006 Centre Bore: 65.1SponsoredUnderstanding wheel fitment measurements: Chevrolet USA HHRPCD and
2006 Offset: centre-bore/","name":"Chevrolet USA HHR Wheel Fitment, PCD, Offset & Centre Bore
2006 Offset: 43Rear Offset: 43Centre Bore: 65.1SponsoredUnderstanding wheel fitment measureme
2006 Offset: 43Rear Offset: 43Centre Bore: 65.1SponsoredUnderstanding wheel fitment measureme
2006 Offset: 43Rear Offset: 43Centre Bore: 65.1SponsoredUnderstanding wheel fitment measureme
2006 PCD: offset-centre-bore/","name":"Chevrolet USA HHR Wheel Fitment, PCD, Offset & Cent
2006 PCD: 5X110Front Offset: 43Rear Offset: 43Centre Bore: 65.1SponsoredUnderstanding whee
2006 PCD: 5X110Front Offset: 43Rear Offset: 43Centre Bore: 65.1SponsoredUnderstanding whee
2006 PCD: 5X110Front Offset: 43Rear Offset: 43Centre Bore: 65.1SponsoredUnderstanding whee
2006 Centre bore: 65.1
2006 Front offset: 43
2006 PCD: 5X110
2006 Rear offset: 43
2006 Centre bore: 65.1
2006 Front offset: 43
2006 PCD: 5X110
2006 Rear offset: 43
2006 Centre bore: 65.1
2006 Front offset: 43
2006 PCD: 5X110
2006 Rear offset: 43
2007 Centre bore: 65.1
2007 Front offset: 43
2007 PCD: 5X110
2007 Rear offset: 43
2007 Centre bore: 65.1
2007 Front offset: 43
2007 PCD: 5X110
2007 Rear offset: 43
2007 Centre bore: 65.1
2007 Front offset: 43
2007 PCD: 5X110
2007 Rear offset: 43
2008 Centre bore: 65.1
2008 Front offset: 43
2008 PCD: 5X110
2008 Rear offset: 43
2008 Centre bore: 65.1
2008 Front offset: 43
2008 PCD: 5X110
2008 Rear offset: 43
2008 Centre bore: 65.1
2008 Front offset: 43
2008 PCD: 5X110
2008 Rear offset: 43
2009 Centre bore: 65.1
2009 Front offset: 43
2009 PCD: 5X110
2009 Rear offset: 43
2009 Centre bore: 65.1
2009 Front offset: 43
2009 PCD: 5X110
2009 Rear offset: 43