All makes › Chevrolet USA › Corvette Stingray › 1983
Cold pressures. Final-tighten wheel nuts with a calibrated torque wrench, never an impact gun. Re-check after 25–50 miles.
No pressure rows for this filter yet.
Fitment specs
1983 Bolt Pattern: 5x120.65. Recorded centre bore (mm): 70.3.Wheel offset (ET)Recorded offset (ET m
1983 Bolt Pattern: 5x120.65. Recorded centre bore (mm): 70.3.Wheel offset (ET)Recorded offset (ET m
1983 Bolt Pattern: 5x120.65. Recorded centre bore (mm): 70.3.Wheel offset (ET)Recorded offset (ET m
1983 Bolt Pattern: 5x120.65. Recorded centre bore (mm): 70.3.Wheel offset (ET)Recorded offset (ET m
1983 Centre Bore: 70.306 - 12Tyre sizes245/40R18275/35R18285/35R19325/30R19285/30R19335/25R20PCD:
1983 Centre Bore: 70.306 - 12Tyre sizes245/40R18275/35R18285/35R19325/30R19285/30R19335/25R20PCD:
1983 Centre Bore: 70.306 - 12Tyre sizes245/40R18275/35R18285/35R19325/30R19285/30R19335/25R20PCD:
1983 Centre Bore: 70.306 - 12Tyre sizes245/40R18275/35R18285/35R19325/30R19285/30R19335/25R20PCD:
1983 Offset: centre-bore/","name":"Chevrolet USA Corvette Stingray Wheel Fitment, PCD, Offset
1983 Offset: 56Rear Offset: 79Centre Bore: 70.306 - 12Tyre sizes245/40R18275/35R18285/35R1932
1983 Offset: 56Rear Offset: 79Centre Bore: 70.306 - 12Tyre sizes245/40R18275/35R18285/35R1932
1983 Offset: 56Rear Offset: 79Centre Bore: 70.306 - 12Tyre sizes245/40R18275/35R18285/35R1932
1983 PCD: offset-centre-bore/","name":"Chevrolet USA Corvette Stingray Wheel Fitment, PCD,
1983 PCD: 5x120.65Front Offset: 56Rear Offset: 79Centre Bore: 70.306 - 12Tyre sizes245/40R
1983 PCD: 5x120.65Front Offset: 56Rear Offset: 79Centre Bore: 70.306 - 12Tyre sizes245/40R
1983 PCD: 5x120.65Front Offset: 56Rear Offset: 79Centre Bore: 70.306 - 12Tyre sizes245/40R
1983 Centre bore: 70.3
1983 Front offset: 51
1983 PCD: 5x120.65
1983 Rear offset: 51
1983 Centre bore: 70.3
1983 Front offset: 32
1983 PCD: 5x120.65
1983 Rear offset: 32
1983 Centre bore: 70.3
1983 Front offset: 51
1983 PCD: 5x120.65
1983 Rear offset: 51
1983 Centre bore: 70.3
1983 Front offset: 51
1983 PCD: 5x120.65
1983 Rear offset: 51
1983 Centre bore: 70.3
1983 Front offset: 51
1983 PCD: 5x120.65
1983 Rear offset: 51
1984 Centre bore: 70.3
1984 Front offset: 51
1984 PCD: 5x120.65
1984 Rear offset: 51
1984 Centre bore: 70.3
1984 Front offset: 32
1984 PCD: 5x120.65
1984 Rear offset: 32
1984 Centre bore: 70.3
1984 Front offset: 51
1984 PCD: 5x120.65
1984 Rear offset: 51
1984 Centre bore: 70.3
1984 Front offset: 51
1984 PCD: 5x120.65
1984 Rear offset: 51
1984 Centre bore: 70.3
1984 Front offset: 51
1984 PCD: 5x120.65
1984 Rear offset: 51
1985 Centre bore: 70.3
1985 Front offset: 51
1985 PCD: 5x120.65
1985 Rear offset: 51