Chevrolet USA Beretta

All makes › Chevrolet USA › Beretta › 1987

Cold pressures. Final-tighten wheel nuts with a calibrated torque wrench, never an impact gun. Re-check after 25–50 miles.

Wheel nut torque · 1987

120 Nm

185/65R14, 185/75R14, 185/80R13, 195/70R14, 205/55R16, 205/60R15

4 bolts

5 bolts

6 bolts

Use the star / cross order that matches the wheel. Start fasteners by hand. Seat the wheel flush on the hub before final torque. Recheck after 25–50 miles. Confirm against the vehicle placard and handbook.

Pressures Torque Placard Location

Workshop checks

When to torque: every time a wheel is off — tyres, punctures, seasonal swap, brakes.

Seat first: the wheel must sit flush on the hub. Dirt or rust under the wheel means the wrench number is meaningless.

Match the seat: conical, ball/radius and flat/washer seats are not interchangeable. Thread size alone is not enough.

Recheck: after 25–50 miles check the same figure again. Do not add extra Nm.

Conicaltapered cone — angle must match the wheel

Ball / radiusrounded seat — common on some OEM alloys

Flat / washerflat clamp, often with a shank and washer

Pressures

Tyre	Normal F/R	Laden F/R	Eco F/R	Torque
185/65R14	31 PSI / 31 PSI	—	—	120 Nm
185/75R14	31 PSI / 31 PSI	—	—	120 Nm
185/80R13	31 PSI / 31 PSI	—	—	120 Nm
195/70R14	31 PSI / 31 PSI	—	—	120 Nm
205/55R16	31 PSI / 31 PSI	—	—	120 Nm
205/60R15	31 PSI / 31 PSI	—	—	120 Nm

Fitment specs

1987 Bolt Pattern: 5x100. Recorded centre bore (mm): 57.1.Wheel offset (ET)Recorded offset (ET mm):
1987 Bolt Pattern: 5x100. Recorded centre bore (mm): 57.1.Wheel offset (ET)Recorded offset (ET mm):
1987 Bolt Pattern: 5x100. Recorded centre bore (mm): 57.1.Wheel offset (ET)Recorded offset (ET mm):
1987 Bolt Pattern: 5x100. Recorded centre bore (mm): 57.1.Wheel offset (ET)Recorded offset (ET mm):
1987 Centre Bore: 57.1Sponsored(adsbygoogle=window.adsbygoogle||[]).push({});Understanding wheel f
1987 Centre Bore: 57.1SponsoredUnderstanding wheel fitment measurements: Chevrolet USA BerettaPCD
1987 Centre Bore: 57.1SponsoredUnderstanding wheel fitment measurements: Chevrolet USA BerettaPCD
1987 Centre Bore: 57.1SponsoredUnderstanding wheel fitment measurements: Chevrolet USA BerettaPCD
1987 Offset: centre-bore/","name":"Chevrolet USA Beretta Wheel Fitment, PCD, Offset & Centre
1987 Offset: 45Rear Offset: 45Centre Bore: 57.1SponsoredUnderstanding wheel fitment measureme
1987 Offset: 45Rear Offset: 45Centre Bore: 57.1SponsoredUnderstanding wheel fitment measureme
1987 Offset: 45Rear Offset: 45Centre Bore: 57.1SponsoredUnderstanding wheel fitment measureme
1987 PCD: offset-centre-bore/","name":"Chevrolet USA Beretta Wheel Fitment, PCD, Offset &
1987 PCD: 5x100Front Offset: 45Rear Offset: 45Centre Bore: 57.1SponsoredUnderstanding whee
1987 PCD: 5x100Front Offset: 45Rear Offset: 45Centre Bore: 57.1SponsoredUnderstanding whee
1987 PCD: 5x100Front Offset: 45Rear Offset: 45Centre Bore: 57.1SponsoredUnderstanding whee
1987 Centre bore: 57.1
1987 Front offset: 45
1987 PCD: 5x100
1987 Rear offset: 45
1987 Centre bore: 57.1
1987 Front offset: 45
1987 PCD: 5x100
1987 Rear offset: 45
1987 Centre bore: 57.1
1987 Front offset: 45
1987 PCD: 5x100
1987 Rear offset: 45
1987 Centre bore: 57.1
1987 Front offset: 45
1987 PCD: 5x100
1987 Rear offset: 45
1987 Centre bore: 57.1
1987 Front offset: 45
1987 PCD: 5x100
1987 Rear offset: 45
1987 Centre bore: 57.1
1987 Front offset: 45
1987 PCD: 5x100
1987 Rear offset: 45
1988 Centre bore: 57.1
1988 Front offset: 45
1988 PCD: 5x100
1988 Rear offset: 45
1988 Centre bore: 57.1
1988 Front offset: 45
1988 PCD: 5x100
1988 Rear offset: 45
1988 Centre bore: 57.1
1988 Front offset: 45
1988 PCD: 5x100
1988 Rear offset: 45
1988 Centre bore: 57.1
1988 Front offset: 45
1988 PCD: 5x100
1988 Rear offset: 45
1988 Centre bore: 57.1
1988 Front offset: 45
1988 PCD: 5x100
1988 Rear offset: 45