Acura RL

All makes › Acura › RL › 2012

Cold pressures. Final-tighten wheel nuts with a calibrated torque wrench, never an impact gun. Re-check after 25–50 miles.

Wheel nut torque · 2012

120 Nm

245/45R18, 245/50R17, 255/35R20, 255/40R19

4 bolts

5 bolts

6 bolts

Use the star / cross order that matches the wheel. Start fasteners by hand. Seat the wheel flush on the hub before final torque. Recheck after 25–50 miles. Confirm against the vehicle placard and handbook.

Pressures Torque Placard Location

Workshop checks

When to torque: every time a wheel is off — tyres, punctures, seasonal swap, brakes.

Seat first: the wheel must sit flush on the hub. Dirt or rust under the wheel means the wrench number is meaningless.

Match the seat: conical, ball/radius and flat/washer seats are not interchangeable. Thread size alone is not enough.

Recheck: after 25–50 miles check the same figure again. Do not add extra Nm.

Conicaltapered cone — angle must match the wheel

Ball / radiusrounded seat — common on some OEM alloys

Flat / washerflat clamp, often with a shank and washer

Pressures

Tyre	Normal F/R	Laden F/R	Eco F/R	Torque
245/45R18	33 PSI / 33 PSI	—	—	120 Nm
245/50R17	33 PSI / 33 PSI	—	—	120 Nm
255/35R20	35 PSI / 35 PSI	—	—	120 Nm
255/40R19	33 PSI / 33 PSI	—	—	120 Nm

Fitment specs

2010 Bolt Pattern: 5X114.3. Recorded centre bore (mm): 64.1.Wheel offset (ET)Recorded offset (ET mm
2010 Bolt Pattern: 5X114.3. Recorded centre bore (mm): 64.1.Wheel offset (ET)Recorded offset (ET mm
2010 Bolt Pattern: 5X114.3. Recorded centre bore (mm): 64.1.Wheel offset (ET)Recorded offset (ET mm
2010 Bolt Pattern: 5X114.3. Recorded centre bore (mm): 64.1.Wheel offset (ET)Recorded offset (ET mm
2010 Centre Bore: 64.1Sponsored(adsbygoogle=window.adsbygoogle||[]).push({});Understanding wheel f
2010 Centre Bore: 64.1SponsoredUnderstanding wheel fitment measurements: Acura RLPCD and centre bo
2010 Centre Bore: 64.1SponsoredUnderstanding wheel fitment measurements: Acura RLPCD and centre bo
2010 Centre Bore: 64.1SponsoredUnderstanding wheel fitment measurements: Acura RLPCD and centre bo
2010 Offset: centre-bore/","name":"Acura RL Wheel Fitment, PCD, Offset & Centre Bore | Pure T
2010 Offset: 45Rear Offset: 45Centre Bore: 64.1SponsoredUnderstanding wheel fitment measureme
2010 Offset: 45Rear Offset: 45Centre Bore: 64.1SponsoredUnderstanding wheel fitment measureme
2010 Offset: 45Rear Offset: 45Centre Bore: 64.1SponsoredUnderstanding wheel fitment measureme
2010 PCD: offset-centre-bore/","name":"Acura RL Wheel Fitment, PCD, Offset & Centre Bore |
2010 PCD: 5X114.3Front Offset: 45Rear Offset: 45Centre Bore: 64.1SponsoredUnderstanding wh
2010 PCD: 5X114.3Front Offset: 45Rear Offset: 45Centre Bore: 64.1SponsoredUnderstanding wh
2010 PCD: 5X114.3Front Offset: 45Rear Offset: 45Centre Bore: 64.1SponsoredUnderstanding wh
2010 Centre bore: 64.1
2010 Front offset: 45
2010 PCD: 5X114.3
2010 Rear offset: 45
2010 Centre bore: 64.1
2010 Front offset: 45
2010 PCD: 5X114.3
2010 Rear offset: 45
2010 Centre bore: 64.1
2010 Front offset: 45
2010 PCD: 5X114.3
2010 Rear offset: 45
2010 Centre bore: 64.1
2010 Front offset: 45
2010 PCD: 5X114.3
2010 Rear offset: 45
2011 Centre bore: 64.1
2011 Front offset: 45
2011 PCD: 5X114.3
2011 Rear offset: 45
2011 Centre bore: 64.1
2011 Front offset: 45
2011 PCD: 5X114.3
2011 Rear offset: 45
2011 Centre bore: 64.1
2011 Front offset: 45
2011 PCD: 5X114.3
2011 Rear offset: 45
2011 Centre bore: 64.1
2011 Front offset: 45
2011 PCD: 5X114.3
2011 Rear offset: 45
2012 Centre bore: 64.1
2012 Front offset: 45
2012 PCD: 5X114.3
2012 Rear offset: 45
2012 Centre bore: 64.1
2012 Front offset: 45
2012 PCD: 5X114.3
2012 Rear offset: 45
2012 Centre bore: 64.1
2012 Front offset: 45
2012 PCD: 5X114.3
2012 Rear offset: 45