Acura ILX

All makes › Acura › ILX › 2012

Cold pressures. Final-tighten wheel nuts with a calibrated torque wrench, never an impact gun. Re-check after 25–50 miles.

Wheel nut torque · 2012

130 Nm

215/45R17, 225/40R18, 245/35R18

4 bolts

5 bolts

6 bolts

Use the star / cross order that matches the wheel. Start fasteners by hand. Seat the wheel flush on the hub before final torque. Recheck after 25–50 miles. Confirm against the vehicle placard and handbook.

Pressures Torque Placard Location

Workshop checks

When to torque: every time a wheel is off — tyres, punctures, seasonal swap, brakes.

Seat first: the wheel must sit flush on the hub. Dirt or rust under the wheel means the wrench number is meaningless.

Match the seat: conical, ball/radius and flat/washer seats are not interchangeable. Thread size alone is not enough.

Recheck: after 25–50 miles check the same figure again. Do not add extra Nm.

Conicaltapered cone — angle must match the wheel

Ball / radiusrounded seat — common on some OEM alloys

Flat / washerflat clamp, often with a shank and washer

Pressures

Tyre	Normal F/R	Laden F/R	Eco F/R	Torque
215/45R17	33 PSI / 33 PSI	—	—	130 Nm
225/40R18	33 PSI / 33 PSI	—	—	130 Nm
245/35R18	33 PSI / 33 PSI	—	—	130 Nm

Fitment specs

2012 Bolt Pattern: 5X114.3. Recorded centre bore (mm): 64.1.Wheel offset (ET)Recorded offset (ET mm
2012 Bolt Pattern: 5X114.3. Recorded centre bore (mm): 64.1.Wheel offset (ET)Recorded offset (ET mm
2012 Bolt Pattern: 5X114.3. Recorded centre bore (mm): 64.1.Wheel offset (ET)Recorded offset (ET mm
2012 Bolt Pattern: 5X114.3. Recorded centre bore (mm): 64.1.Wheel offset (ET)Recorded offset (ET mm
2012 Centre Bore: 64.1Sponsored(adsbygoogle=window.adsbygoogle||[]).push({});Understanding wheel f
2012 Centre Bore: 64.1SponsoredUnderstanding wheel fitment measurements: Acura ILXPCD and centre b
2012 Centre Bore: 64.1SponsoredUnderstanding wheel fitment measurements: Acura ILXPCD and centre b
2012 Centre Bore: 64.1SponsoredUnderstanding wheel fitment measurements: Acura ILXPCD and centre b
2012 Offset: centre-bore/","name":"Acura ILX Wheel Fitment, PCD, Offset & Centre Bore | Pure
2012 Offset: 50Rear Offset: 50Centre Bore: 64.1SponsoredUnderstanding wheel fitment measureme
2012 Offset: 50Rear Offset: 50Centre Bore: 64.1SponsoredUnderstanding wheel fitment measureme
2012 Offset: 50Rear Offset: 50Centre Bore: 64.1SponsoredUnderstanding wheel fitment measureme
2012 PCD: offset-centre-bore/","name":"Acura ILX Wheel Fitment, PCD, Offset & Centre Bore
2012 PCD: 5X114.3Front Offset: 50Rear Offset: 50Centre Bore: 64.1SponsoredUnderstanding wh
2012 PCD: 5X114.3Front Offset: 50Rear Offset: 50Centre Bore: 64.1SponsoredUnderstanding wh
2012 PCD: 5X114.3Front Offset: 50Rear Offset: 50Centre Bore: 64.1SponsoredUnderstanding wh
2012 Centre bore: 64.1
2012 Front offset: 50
2012 PCD: 5X114.3
2012 Rear offset: 50
2012 Centre bore: 64.1
2012 Front offset: 50
2012 PCD: 5X114.3
2012 Rear offset: 50
2012 Centre bore: 64.1
2012 Front offset: 50
2012 PCD: 5X114.3
2012 Rear offset: 50
2013 Centre bore: 64.1
2013 Front offset: 50
2013 PCD: 5X114.3
2013 Rear offset: 50
2013 Centre bore: 64.1
2013 Front offset: 50
2013 PCD: 5X114.3
2013 Rear offset: 50
2013 Centre bore: 64.1
2013 Front offset: 50
2013 PCD: 5X114.3
2013 Rear offset: 50
2014 Centre bore: 64.1
2014 Front offset: 50
2014 PCD: 5X114.3
2014 Rear offset: 50
2014 Centre bore: 64.1
2014 Front offset: 50
2014 PCD: 5X114.3
2014 Rear offset: 50
2014 Centre bore: 64.1
2014 Front offset: 50
2014 PCD: 5X114.3
2014 Rear offset: 50
2015 Centre bore: 64.1
2015 Front offset: 50
2015 PCD: 5X114.3
2015 Rear offset: 50
2015 Centre bore: 64.1
2015 Front offset: 50
2015 PCD: 5X114.3
2015 Rear offset: 50